ASTRO Junior User manual

Astro Junior
F-1x2
F-1-1F-2
F-3-1
F-3
F-4-1F-4
F-5
F-0
F-15
F-17
F-16
F-12
F-0-0 F-0-5
F-5F-6
F-7
F-8
F-9
F-10
F-11
4x4mm Balsa strips
F-30
F-18
F-29
6x6mm Balsa strips
F-19
F-44
F-62
F-52
4x4mm Balsa strips
4x4mm Balsa strips
4x4mm
Balsa strips
F-26
F-26
F-47
F-46
F-47
F-26
F-2-1
F-12-1
F-22
F-23
F-21
E-15
F-24
4x4mm
Balsa strips
4x20mm
Round pole Z-1
Z-1-1
Z-2
Z-3
Z-4
Z-7
Z-7
Z-5
Z-8 Z-6
F-42
F-42
F-43 Z-9
Z-9
F-53
F-53
F-45
F-45
W-8-1
W-8-1
W-8-1
W-8
W-8
W-1 W-2
W-3-1
W-3
W-4 W-5 W-5 W-5 W-5 W-5 W-6
W-16
W-9
W-18
6x6mm
Paulownia wood strips
Fuselage installation
Sand the nose to the appropriate
shape with fuselage
1
Wing installation
2
1.2 Cockpit installation.
2.1 Wing construction.
1.1Fuselage construction.
1.6 Cover installation.
1.4 The rear of fuselage installation.
1.5 Cabin installation.
1.3 Nose installation.
integral Sanding, complete the installation of fuselage
F-4-1
1---7
F-46
F-0
F-0
Sand it to the appropriate shape
with fuselage.
Balsa Wood Airplane

Astro Junior
W-10
W-7
W-11
W-12
W-13
W-20
W-25
W-14
W-26 W-27 W-25-1
W-20
W-17
W-28
W-28 W-26
W-26
W-27
W-14-1
W-19
Fasten the leading edge of the wing with
glue, then sand it to the corresponding
radian with wing.
W-27
W-23
W-23
Triangular paulownia
wood block Triangular balsawood block
塑料扣 轮挡
2.2 Cover of the wing installation. 2.3 Landing gear installation.
2.4 Lower cover of the wing installation and servo position
installation
2.5 Fix the landing gear and install
the wheels.
2.6 Stick the leading edge of the wing. 2.7 Aileron Installation 2.8 Assemble the other wing with same way, plug them into each
other, stick the junction with glue.
Tail wing assembly and rear wheel installation
3Other parts assembly
4
Screw
Screw
Insert plugs Magnet
Magnet
Please measure with ruler,draw line and punch
for the screw holes here.
Motor installation position
Cut off the unnecessary
part with knife
E-7
E-17 E-17
E-7
E-2
E-1 E-1
E-2
E-3
E-9
E-5
E-16
E-12 E-10
E-14
E-4
E-6
E-13
E-8
Connect aileron with
U-shape steel wire
E-11
E-11
E-11
Specification:
Wingspan: 1380mm
Fuselage Length: 1010mm
Flying weight: 1.6kg
Suggested Equipment:
Motor: 2814(3520) 950KV
ESC: 60A
Servo: 17g x4 (EP version)
17g x5 (GP version)
Propeller: 10-12 inch
Battery: 3S 2800-4000mAh
Radio :more than 4CH
GP: 2C30 class methanol or 5CC Engine
C.G C.G:80mm away the
leading edge.
80mm
Balsa Wood Airplane