AT&T 992 User manual

1
This Quick Reference Guide provides basic instructions. For complete
instructions which allow you to use all features of this phone, refer to
yourTwo-Line Speakerphone with Caller ID/Call Waiting 992 User's
Manual, Part 2. Page references are provided for your convenience.
INSTALLATION (Pages 5–11)
• Install a 9V alkaline battery (not included). The battery is needed for
feature operation during a power failure.
• Connect the handset and line cords.
• Connect the power adapter.
MENU OPERATION AND
FEATURE SETUP (Pages 12–24)
Use the on-screen menu to change settings for the 992 features and to program
the One Touch and Directory memories.
•Access the menu by pressing Ewhen the phone is idle.
•Use +and -to move through the menu.
•Use <and >to change the settings.
•Press Eto make a selection.
QUICK REFERENCE GUIDE
Two-Line Speakerphone with
Caller ID/Call Waiting 992
0992_QRG_1ATT_FINAL_021605 2/18/05 3:04 PM Page 1

Menu Structure
ONE TOUCH
PROGRAM
VIEW
AUTO SPEAKER
MAIN MENU
PHONE SETTINGS
PRIMARY LINE
ALS ON/OFF
PREFERRED MODE
SET TIME/DATE
LCD BACKLIGHT
SCROLL RATE
MAIN MENU
CALLER ID OPERATION (Pages 43–51 )
Review Call History (Pages 46–47)
Press -to begin reviewing records in call history. Press +or -to move
through the list.
Dial a Number from Call History (Page 49)
Locate the number you want to call in call history. Then, lift the handset, press
Kor press H, and press Eto dial the number.
DIRECTORY OPERATION (Pages 37–42)
Store an Entry in the Directory (Pages 38–39)
Press Dto enter the directory, then, press -to scroll to ADD ENTRY.
Press Eto select ADD ENTRY. Enter the name you want to store. Press
the dial key with the desired letter until that letter is shown in the display.
Repeat for each letter. (Press >if the next letter is on the same key). Press
store.Press Eto select DONE.
Dial a Number from the Directory (Page 42)
Press Dto enter the directory. Locate the name of the party you want
to call by pressing the dial pad key with the first letter of the name. Use -to
move through the directory if needed. Then, lift the handset, press Kor
press H, and press Eto dial the displayed number.
2
VOICE MESSAGE
L1 COVM ON/OFF
L2 COVM ON/OFF
L1 LIGHT OFF
L2 LIGHT OFF
MAIN MENU
CALLER ID
AREA CODES
CALL HISTORY
REPEAT CALLS
CID-CALL WAIT
MAIN MENU
LANGUAGE
0992_QRG_1ATT_FINAL_021605 2/18/05 3:04 PM Page 2
Eto select ENTER NUMBER, then enter the phone number you want to

TELEPHONE OPERATION (Pages 25–32)
Hold (Page 30)
Place a handset, speakerphone or headset call on hold by pressing H.
To return to the call, press the LINE button of the call. The call will
automatically be reconnected in the original mode (speakerphone or headset)
or you can lift the handset if automatic line selection is set to Off.
Conference Calls (Page 31)
To establish a conference call, make or answer a call and press H.
Establish a call on the other line, then press C.
To end the conference call, hang up.
3
0992_QRG_1ATT_FINAL_021605 2/18/05 3:04 PM Page 3

©2006 Advanced AmericanTelephones.
All Rights Reserved.
AT&T and the Globe Design are
trademarks of AT&TCorp.,licensed to
Advanced AmericanTelephones.
Printed in China. Issue 2AT&T 05/06
In case of difficulty, visit our Service Center at
www.telephones.att.com or call 1 [phone].
0992_QRG_1ATT_FINAL_021605 2/18/05 3:04 PM Page B