AT&T U-verse TV User manual

¿Habla español? Por favor visite att.com/uverseguias para ver la informacion en Español.
También puede ver la siguiente guía: ATT110900769-6 (Wireless TV Receiver) para más detalles.
Impor tant legal information regarding your Wireless Receiver: Additional fee(s) may apply. Wireless from the Wireless Access Point to the Wireless Receiver; power outlet and separate connection of Wireless
Receiver to TV is required . For residential use in a single household only. Limit two wireless receivers per household. Ac tual range of wireless signal will vary and may be limited by several factors including,
but not limited to, electromagnetic interference, home construction material, obstructions, and other environmental factors. The installation and use of the Wireless Receiver is subject to the AT&T U-verse
Terms of Service that can be found at att.com/u-verse/att-terms-of-service.jsp.
©2014 AT&T Intellectual Property. http://www.att.com/gen/privacy-policy?pid=2587 All rights reserved. AT&T, the AT&T
logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated companies.
AT&T U -ver se ®TV
Wireless TV Receiver
self-
installation
guide
UVEP584_Wireless_TV_Install_Guide_BC_Release UVEP584_Wireless_TV_Install_Guide_FC_Release
Questions?
Go online: Visit att.com/uversesupport.
To learn more about the benefits and features of your
AT&T U-verse service, visit att.com/u-verse/newcustomer.
Average installation time: 20 minutes
Ready to install your AT&T U-verse Wireless TV Receiver?
Let’s get started
ATT110900769-6
FPO
Note: Additional cable(s) (HDMI, RCA, Coaxial, etc.) that connects TV with AT&T U-verse Wireless Receiver not included.
Important!
Do not attempt to install your
new receiver until 8pm or later
on your service activation date.
You can find this date on your
packing slip.
Packing slip
Adding a second
Wireless TV Receiver
A Complete the installation of the first TV Receiver.
B Repeat steps 2 and 3 in this guide with the second TV Receiver.
From there you can:
•View help videos
•Chat online with a technician
•Easily find troubleshooting information and user guides
•Learn how to return this product
If that doesn’t do it, give us a call at 1.800.288.2020 and ask for
“U-verse technical support.” We can help you with that!
Visit: att.com/wirelesstv
or scan the QR code
Download and install the free AT&T
Code Scanner on your mobile phone
at http://scan.mobi or your app store.
Service Activation Date: x:xx PM on XX/XX/XX
AT&T U-verse Wireless TV Receiver
Your existing Wi-Fi Gateway
(actual model may vary)
AT&T U-verse Wireless TV
Receiver power cord (2 parts)
Ethernet
cable
HDMI, component, composite,
or coaxial cabling (not included)
Remote
control
Wireless Access Point
power cord
Wireless Access
Point
Not Sure?
Check the
sticker.
What’s in the box?
To install your Receiver, you will need:
What else do you need?
Your T V’s
user manual
POWER
POWER
POWER

UVEP584_Wireless_TV_Install_Guide_IFC_Release UVEP584_Wireless_TV_Install_Guide_IBC_Release
B Press the Wi-Fi Protected Setup (WPS) button on the front of the
Wireless Access Point, and you’ll see a fast-blinking LED light up
on the unit.
C When you see a green antenna icon on your TV screen or a green
LED on the front of your receiver, you’ve paired successfully. It may
then take a few more minutes before live TV appears.
Nicely done. The hard part is over – now it’s time to enjoy U-verse TV.
Having trouble?
If you see a red antenna:
1Disconnect your Wireless TV Receiver from its current location.
2Plug the receiver into a power cord that is closer to the
Wireless Access Point.
3Give it a minute and then repeat Steps 3A and 3B.
Set up Pair up
Power up
First you need to connect your existing Wi-Fi Gateway to the Wireless Access Point.
NOTE: If you are adding a Second Wireless TV Receiver, skip this step and go to Step 2.
Now let’s get your Wireless TV Receiver and Wireless Access Point talking to each other.
Follow the instructions on your TV screen.
The next step is to connect your Wireless Receiver to your TV.
AConnect the Wireless Access Point to your existing Wi-Fi Gateway using the yellow Ethernet cable.
BUse the power cord to plug the Wireless Access Point into a working electrical outlet.
AConnect the receiver to your TV with an HDMI cable (not included). You may also use RCA or
Coaxial cables.
BPower up your TV and go to the Input Source screen. Your TV manufacturer’s remote control may
have an Input button that will take you there. Select the Source you used in Step 2A. For instance,
if you used an HDMI cable, select HDMI.
CPut the two-part power cord together.Then use it to plug the receiver into an electrical outlet and
it will power up automatically. After about a minute, you’ll receive additional onscreen instructions.
1. 3.
a.
a.
B.
B.
C.
2.
Wireless Receiver
(back)
A On the front of your new receiver, press the OK button.
Note: Pairing occurs quickly. To ensure you have proper signal strength,
there should be at least three LED green bars lit up on the receiver.
Your TV screen should look like this.
Your TV screen should look like this.
New AT&T U-verse customers or current customers adding a new receiver will need to program
the new remote control. Programming instructions are available online at att.com/wirelessTV
and in the remote control user guide packaged with the remote control.
Remote control information
Your TV screen should look like this.
POWER
POWER
Remember:
Make sure you have an open Ethernet port
on your existing Wi-Fi Gateway, and be
sure to leave existing cables plugged in.
No open port? You’ll need to purchase
an Ethernet hub with additional ports.
Wireless Access Point
(back)
Wi-Fi Gateway
(back)