ATD Tools ATD-5834 User manual

ATD-5834
Hand Riveter Instructions
1. Select appropriate rivet for application and drill same size hole through materials to be fastened.
2. Select rivet length (L) based on combined thickness (T) of materials to be fastened. It is suggested that L-T >
0.16” (4.0mm)
3. Open tool handle fully and insert rivet mandrel all the way into the tool nosepiece, then insert rivet head into the
prepared hole completely.
4. Squeeze tool handle until rivet mandrel breaks off. If more than one squeeze is required, open tool handle fully
and squeeze again.
5. Open tool handle fully to eject rivet mandrel from tool.
HOW TO CHANGE JAWS
1. Close tool handle completely, keeping handle closed with tape or a chain.
2. Remove retaining screw with wrench then remove jaw pusher spring
3. Clean or replace jaws, oiling outside of jaws before reassemble
4. Reassembly is the reverse of above steps. Be sure that the beveled end of jaw pusher fits into bevel on the jaws.
! !
WARNING
Always wear ANSI approved safety goggles when using this product.
Normal use of this product is likely to expose the user to dust
and/or microscopic particles containing chemicals known to the
State of California to cause cancer, birth defects or other reproductive
harm. Wash hands after handling. Always wear appropriate safety
equipment and clothing when using this product. Study, understand
and follow all instructions provided with this product.

ATD-5834
ITEM# ORDERING PART# PART DESCRIPTION
1 PRT5834-01 BODY
2 PRT5834-02 HANDLE
3 PRT5834-03 JAW CARRIER
4 PRT5834-04 JAW
5 PRT5834-05 NOSEPIECE -3/16"(4.8/5.0MM)
6 PRT5834-06 NOSEPIECE -5/32"(4.0MM)
7 PRT5834-07 NOSEPIECE -3/32"(2.28MM)
8 PRT5834-08 NOSEPIECE -1/8"(3.3MM)
9 PRT5834-09 PUSHER
10 PRT5834-10 SCREW
11 PRT5834-11 SPRING
12 PRT5834-12 CLIP PIN
13 PRT5834-13 CLIP BARREL
14 PRT5834-14 SPRING
15 PRT5834-15 WRENCH
16 PRT5834-16 PLASTIC GRIP
17 PRT5834-17 PLASTIC GRIP
18 PRT5834-18 POTHOOK
A01 PRT5834-A01 SPRING PIN
A02 PRT5834-A02 CLIP
A03 PRT5834-A03 SPRING PIN
Made in China to ATD Tools, Inc. Specifications
Visit us at www.atdtools.com