ATD Tools Saber ATD-80373 User manual

Owner’s Manual
ATD-80373
300 Lumen COB Rechargeable Work Light
PLEASE NOTE BEFORE ORDERING PARTS:
dŚĞƌĞĂƌĞƚǁŽǀĞƌƐŝŽŶƐŽĨƚŚŝƐůŝŐŚƚƚŚĞĮƌƐƚŐĞŶĞƌĂƟŽŶŚĂƐƐĐƌĞǁƐ
ŝŶƚŚĞƚŽƉŽĨƚŚĞƚŽƉůĞŶƐŚŽƵƐŝŶŐǁŚŝůĞƚŚĞƐĞĐŽŶĚŐĞŶĞƌĂƟŽŶŚĂƐƐĐƌĞǁƐ
in the sides of the top lens housing. Please see the correct drawing
for the correct part numbers for YOUR light.
THESE PARTS ARE NOT INTERCHANGEABLE!
2nd Generation1st Generation

Owner’s Manual
Made in China to ATD Tools, Inc^ƉĞĐŝĮĐĂƟŽŶƐ
Visit us at www.atdtools.com
ATD-80373
300 Lumen COB Rechargeable Work Light
Operating instructions
· To use, plug the unit into any 110-120V AC power source, such as a wall receptable. Let the uni
4 LED’s light up on the front before use.
·
·
Cautions
· Use only the recommended voltage and frequency requirements.
· Keep out of reach of children.
· Do not operate light with wet hands.
· Keep lamp away from hot objects.
Features
· Front 300 lumens (high), 160 lumens (low)
· 50 lumens
· e
·
·
·
· Tough, impact resistant ergonomic housing
· Run Time: Up to 3-hours (high), up to 6-hours (low)
· IP54 rated for dust & water resistance

ATD-80373
(REV 03-16)
(FIRST GENERATION)
ITEM# ORDERING PART# PART DESCRIPTION ITEM# ORDERING PART# PART DESCRIPTION
1 PRT80373-01 DC COVER 9 PRT80373-09 LED
2 PRT80373-02 BOTTOM FIXED BLOCK 10 PRT80373-10 HEAT SINK
3 PRT80373-03 LI-ION BATTERY 11 PRT80373-11 SCREW B
4 PRT80373-04 SCREW A 12 PRT80373-12 LED COVER
5 PRT80373-05 HANDLE 13 PRT80373-13 O-RING
6 PRT80373-06 PCBA WITH TOP LED 14 PRT80373-14 TOP FIXED BLOCK
7 PRT80373-07 PC TUBE / LENS 15 PRT80373-15 HOOK ASSEMBLY
8 PRT80373-08 REFLECTOR 16 PRT80373-16 AC ADAPTOR, 5V 2A

PRT80373-07-14 PRT80373-07-14
PRT80373-07-14
TOP BLOCK TOP BLOCK
TOP BLOCK
REFLECTOR & PC TUBE ASSB.
(SECOND GENERATION)
(REV 03-16)