Bayco NIGHTSTICK Dual-Light Xtreme Lumens... User manual

Included in the box
Instruction Manual
NSR-9844XL
US PATENT 9,713,217 AND 10,088,138
THANK YOU FOR SELECTING THE NIGHTSTICK NSR-9844XL!
Please read these instructions before using your 9844XL. They
include important safety and operation information. Be sure to charge the
9844XL fully before the fi rst use. A battery is fully charged when the charger
light is green.
WARNINGS
yLithium-ion batteries must be used and charged properly. Improper use
can result in serious injury,  re, or death.
yNOT FOR USE IN HAZARDOUS LOCATIONS. Do not use this product
in explosive atmospheres, near  ammable liquids, or where explosion proof
or intrinsically safe lighting is required.
yDO NOT use this product in the proximity of vehicles or equipment when
there is a risk of  ammable liquids coming into contact with the  ashlight.
yLight can become hot while on. To prevent damage DO NOT cover or
place next to any potentially  ammable materials while in use.
yDo not leave the battery in direct sunlight or use or store the battery inside
cars in hot weather.
yDo not expose the battery to water or salt water, or allow the battery to
get wet.
yDo not store the battery with metallic objects that may cause a short circuit.
yImmediately discontinue use of the battery if the battery emits an unusual smell,
feels hot, changes color, changes shape or appears abnormal in any way.
yKeep out of the reach of children.
STROBE WARNING
Exposure to strobing lights may cause dizziness, disorientation, and
nausea. A very small percentage of people suffer from photosensitive
epilepsy and may experience seizures or blackouts triggered by strobing
lights. Anyone who has had symptoms linked to this condition should
consult a doctor before using this product.
INITIAL USE
yFully charge the 9844XL before the  rst use, or if the battery is new or
has been unused for several months. The maximum charge time required
is approximately 6 hours.
DAILY USE
yUse only the supplied Nightstick charger, battery and AC or DC adapter.
For best performance, charge the 9844XL when the  ashlight beam starts
to dim.
yConnect the AC power adapter to the charger. The LED indicator will not
be illuminated at this point.
yWith the  ashlight facing forward, snap the 9844XL into the charger until
the contacts snap into place.
yThe LED indicator changes to constant red indicating the 9844XL is
properly inserted into the charger and is in fact charging. The LED indicator
remains red until the battery is fully charged. At full charge, the LED indicator
turns green.
yThe total time to full charge the 9844XL varies depending on the remaining
charge in the battery pack.
yTo con rm a full charge, keep the 9844XL in the charger and turn it on.
The LED indicator will change to red. Turn off the 9844XL. If the 9844XL is
fully charged, the LED indicator will turn green. If not, it remains red until
the charge is completed and the LED indicator turns green. The 9844XL will
now be fully charged.
CR-123 BATTERY CARRIER
The CR123 battery carrier converts the 9844XL from rechargeable
Lithium-ion to non-rechargeable Lithium battery operation.
Load two CR-123 Lithium batteries with the positive terminals pointing in
the direction of the arrow. NOTE: The  ashlight cannot be charged with the
CR-123 CARRIER installed.
OPERATION
The 9844XL has seven light modes: momentary  ashlight, full
brightness  ashlight, medium brightness  ashlight, low brightness
 ashlight,  oodlight, dual-light and strobe. The 9844XL has a unique tail-
switch that operates both the  ashlight and  oodlight in one con guration.
switch that operates both the  ashlight and  oodlight in one con guration.switch that operates both the  ashlight and  oodlight in one con guration.

Momentary Flashlight Mode
Lightly press the upper raised portion of the tail switch (without clicking the
ashlight on) for momentary operation. Release the switch to turn the light off.
Constant-on
Fully press the upper raised portion of the tail switch until it clicks and
then release for constant-on in high-brightness mode. Press and release the
switch to turn the light off.
Select Brightness Level
Press and hold down the upper raised portion of the tail switch. The light
will cycle from high to medium to low and then back up again at a rate of
approximately one mode per second. The light will continue to cycle up and
down through the various modes as long as the switch is held down. When
the desired brightness level is reached, simply release the switch, and the
light will remain in that brightness mode. Press and release the switch to turn
the light off.
Floodlight
Press the bottom recessed portion of the tail switch until it clicks and then
release for oodlight mode. Press and release the switch again to turn the
light off.
Dual-Light
Dual-Light allows the user to turn on both the Flashlight (at any brightness
level) and the Floodlight, at the same time. First select the appropriate
brightness level of the ashlight using the directions above. Next press and
release the bottom switch to activate the oodlight. Both the Flashlight and
the Floodlight are now running. Press and release both the upper and lower
switches to turn the light off.
Strobe Function
From off or any mode, rapidly double click the upper raised portion of the
tail switch to activate the strobe function running at full brightness. Press and
release either switch to turn the light off.
Learn more about work lights on our website.