atecpool R2007FX User manual

atecpool.com
OWNER’S
MANUAL
Control Panel R2007FX / R2009FX
with Remote
Control
“Adding light
to your life”
atecpool.com

atecpool.com
Input Voltage : 220V-240V
Output Power : 220W
Size: 195mm x 195mm x 90mm
Weight: 3.75Kg
3. “REMOTE” button for
pairing the remote with
the controller
Working temperature: 0 C -50 C
Installation
Technical Specification
r rom the pool. The manufacturer is not responsible in any
start-up of any electric components that have been
ts own premises
Installation
Prior to commencing, make sure there is no electricity passing through the wires and cables
to be connected. Mount the transformer on a solid and secure wall at a minimum distance of
2 meters from any water source or pipes. Connect the 220V input voltage into the terminals
clearly marked as 220V AC INPUT . Connect the lamp cables to the terminals clearly marked
as LAMP 12VAC OUTPUT . It is good practice to check and verify that there is a fuse inside the
fuse carrier, and that it is functioning. It is essential to make sure the connections are as tight as
possible in order to avoid sparking.
Owner’s Manual > Control Panel R2007FX with Remote Control
Power Light
2. Output 12V AC to the LED lights
1. Input the power source(220-240V AC)
to the controller

atecpool.com
Technical Specification
Input Voltage : 220V-240V
Max Power
Working temperature: 0 C -40 C
Size: 195mm x 195mm x 90mm
Weight: 1 Kg
Installation
r rom the pool. The manufacturer is not responsible in any
start-up of any electric components that have been
ts own premises
Installation
Prior to commencing, make sure there is no electricity passing through the wires and cables
to be connected. Mount the transformer on a solid and secure wall at a minimum distance of
2 meters from any water source or pipes. Connect the 220V input voltage into the terminals
clearly marked as 220V AC INPUT . Connect the lamp cables to the terminals clearly marked
as LAMP 12VAC OUTPUT . It is good practice to check and verify that there is a fuse inside the
fuse carrier, and that it is functioning. It is essential to make sure the connections are as tight as
possible in order to avoid sparking.
Owner’s Manual > Control Panel R2009FX with Remote Control
2.Output(220 - 240V AC) to
Stepdown Transformer 1. Input the power source(220-240V AC)
to the controller
Power Light
3. “REMOTE” button for
pairing the remote
with the controller

atecpool.com
For pairing: After installing R2007FX / R2009FX, press the “REMOTE” button on the controller,
then press any button on the remote to confirm pairing.
Remove all pairing: press and hold the “REMOTE” button for 6 seconds.
Note:
Each controller comes with one remote
The max distance for remote controlling is 50 meters
The remotes uses 23A/12V battery
Remote Controlling : Buttons
Remote Controlling
Owner’s Manual > Control Panel R2007FX / R2009FX with Remote Control
.
.
.
.
B1: Brightness Up
B3: Party
B4: Brightness Down
B6: White
B8: Green
B9: Blue
B12: Red-Blue
B14: Evening Rivers
B15: Riviera
B18: Disco
B2: Four Seasons
B7: Red
B10: Blue-Green
B11: Red-Green
B13: Evening Sea
B16: Super Disco
B17: Four Seasons

Contact us
“Adding light
to your life”
atecpool.com
For more product
information:
ATEC PO OL IN TERN ACI ONA L ESP AÑ A
World Trade Center Edificio Sur
2ª Planta - Muelle de Barcelona
Tel. [phone]
Email: [e-mail]
Spain
Frillesaasvaegen 83
Tel. + 46 703 655 630
Email: [email protected]
Sweden
Jebel Ali Free Zone
P.O.Box: 18400 Dubai
United Arab Emirates
Tel.+ 971 4 8860880
Fax: + 971 4 8860881
Email: [e-mail]
United Arab
Emirates
20 Me rcantile Crt.
Molendinar, Qld 4214
P.O. Box: 638, Ashmore City
Tel. + 61 7 55 949111
Fax: + 61 7 55 949266
Email: [email protected]
Australia
join us