ATEN CE790 User manual

CE790 Digital KVM Extender
Graphical User Interface (GUI)
User Manual
www.aten.com

CE790 GUI User Manual
2
FCC Information
This is an FCC Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
RoHS
This product is RoHS compliant.
SJ/T 11364-2006
The following contains information that relates to China.

CE790 GUI User Manual
3
CE790 GUI Operation
Overview
A CE790 installation can be managed via a Graphical User Interface (GUI) on
systems that are running Windows. In order to use this management utility, two
separate items of software must be installed on all of the PCs in your
installation – WinPcap and the CE790 AP. This procedure is detailed in the
following sections.
Before You Begin
WinPcap
The CE790 GUI is a WinPcap-based application. WinPcap is the industry-
standard tool for link-layer network access in Windows environments. For
further information, go to www.winpcap.org.
To install WinPcap on your PC, do the following:
1. Download the WinPcap executable file from the website, and run it.
2. Follow the instructions on the screen. The installation applet will
automatically detect the operating system and install the correct drivers
3. WinPcap-based applications are now ready to work. Download the CE790
AP as below.
CE790 AP
To download the WinPcap-based CE790 AP in order to use the Browser GUI
to manage your CE790 installation, do the following:
1. Download the CE790 AP from the ATEN website (www.aten.com).
2. Save the file to a convenient location.
3. Click on the file to open the CE790 GUI.

CE790 GUI User Manual
4
GUI Main Page
The CE790 Management Utility is a convenient and intuitive method to
manage your complete CE790 installation from one screen. To invoke the GUI,
simply click on the CE790 icon in your file system. The main page appears:
The various elements of the GUI are described in the following sections.
Network Adapters
The Network Adapters section has a drop-down menu with a list of the network
adapters on the PC that are available to work with this application. To select a
network adapter, do the following:
1. Select an adapter from the drop-down menu.
2. Click Set Adapter to confirm your selection.

CE790 GUI User Manual
5
Connections
The Connections section displays the connections between the CE790T
Transmitters and CE790R Receivers in the installation. It also displays basic
configuration information for each unit – topology (Unicast or Multicast –
Transmitters only); IP address; and Mac address.
To view the latest list of CE790T Transmitter and CE790R Receiver units
currently connected in the installation, click Refresh.
To disconnect a CE790R Receiver from a CE790T Transmitter in the
installation, tick the checkbox next to the Receiver and click Delete
Receiver.

CE790 GUI User Manual
6
Available Receivers
The Available Receivers section displays the CE790R Receivers that are
currently attached to the installation and are available for connection. Select a
CE790R Receiver in this list to view detailed information in the CE790
Configuration section. See CE790 Configuration, page 7.
Receivers
The Receiver section has a drop-down menu of CE790R Receivers that are
available to connect to CE790T Transmitters.
To connect a CE790T Transmitter to a CE790R Receiver, select a
Transmitter in the Connections section (see page 5) by ticking its
checkbox. Then, select a CE790R Receiver from this drop-down menu
and click Add. The Transmitter connects to the selected Receiver.

CE790 GUI User Manual
7
CE790 Configuration
The CE790 Configuration section displays details about the Transmitter or
Receiver units that have been selected, and allows you to change the
configuration information of the selected unit.
Name – Each unit can be given a name (15 characters or less, upper case
only)
IP Address – The unit’s IP address can be changed here.
MAC – The unit’s MAC address displays here.
Topology – The unit’s topology can be configured here. Options are
Multicast and Unicast.
Select Multicast if you want the selected CE790T to be able to connect
to multiple CE790Rs.
Select Unicast if you want the selected CE790T to be able to connect
to a single CE790R only.
Note: Only CE790T Transmitters have configurable topology.
After you have made each of your changes, click Change to confirm your
selection.

CE790 GUI User Manual
8
Backup Receivers
The Backup Receivers section displays the backup CE790R Receivers for
selected CE790T Transmitters, depending on the CE790T’s topology (see
page 7).
If the selected CE790T is configured as “Unicast,” you can set one
CE790R as Backup 1. The CE790T will attempt to connect to this backup
CE790R if it loses the connection with its current CE790R for more than
five seconds.
If the selected CE790T is configured as “Multicast,” you can set two
CE790Rs as Backup 1 and Backup 2. The CE790T will attempt to connect
to Backup 1 if it loses the connection with its current one for more than
five seconds; then it will try Backup 2; then Backup 1 again, and so on.
Log
The Log section displays all the events that take place in the Browser GUI, in
addition to displaying error messages.