ATIENA L01 Series User manual

L01 Series
Installation Guide v1.0
ATIENA

01 www.atienatech.com
r
Guide for more information.
Install and test the lock with the doo
open to avoid being locked out.
Please read all instructional information
before contacting customer service.
Please contact customer service befor
returning the product to the store.
DO NOT install the batteries before
installing the lock! Follow the instructions!
If you have used this lock on another
door, you have to reset lock to factory
setting before re-install! Read the User
You can find our instuction video at
Youtube,Facebook or our official website:
www.atienatech.com

02 www.atienatech.com
Included in the box
Interior KnobKeypad Knob
Bolt & Strike PlateInterior Handle
(Decomposition Diagram)
CardsAllen Key

03 www.atienatech.com
Included in the box
1:1
2-3/4”Square Bar
3/4”Screw C
1-1/8”
Rod A X2
2-1/8”
Screw A X2
Set A
Rod B X2
1-1/2”
2-1/2”
Screw B X2
Set B

04 www.atienatech.com
STEP 1
Check Door s Dimension
60mm
54mm
25mm
（2-1/8”）
（1”）
1-3/8”
1-3/4”
For Door Thickness
Set A
Set B
Backset

05 www.atienatech.com
STEP 2
Installing Deadbolt and Strike Plate
3/4”
Screw
outside
inside
inside
outside
Make sure
the short
side facing
outside

06 www.atienatech.com
Installing Keypad Knob
STEP 3
outside
Note: Make sure the logo/fingerprint
sensor is facing up.
1.Insert the Square bar, turn the
Triangle Mark Point to the “S”
Mark on the Keypad Knob.
2.Insert the Screw A/B, and then
attach Rods A/B.
Screw A/B
square bar
Rod A/B

07 www.atienatech.com
STEP 4
Installing Interior Knob
inside
Remove the Cover of Interior Knob first. Then install the
Keypad knob correspondingly, make sure the logo in Interior
Knob is facing up, use Allen Key to tighten screws.
Note II: Using
allen key evenly
screw in the
screw on both
side. Do not
only tighten
one side.
Note I: Make
sure the Spring
do not stuck
inside, espe-
cially when
re-installing
the smart lock.

08 www.atienatech.com
Installing Batteries & Cover
STEP 5
inside Insert 4 AA Batteries.
Press and hold the
button on the cover,
put the cover onto
the knob in the
correct position, then
release your hold on
the button , it will
latch onto the knob.

09 www.atienatech.com
Reset and Safe Mode
STEP 6
Only Authorized admin allowed to open by App or Passcode.
(Password, fingerprint and IC card from other users will not
be allowed to open the lock)
1. Press and hold the Button on the down side of Interior
knob for 3 seconds to turn on safe mode，
You will hear “Secure Lock On”
2. Press the same button to turn off the safe mode,
You will hear “Secure Lock Off”
1. Turn the keypad Knob anti-clockwise 90 degrees, then
hold the button on downside of interior knob for 3
seconds.
2. Put “000” 3 digit code on Keypad to confirm the reset.
3. Connect lock with app, delete the lock in App, then the
lock will automatically reset to factory setting.
RESET to Factory Setting
Safe Mode

Check the User Guide in www.atienatech.com
Final Step
NEED HELP?
Please contact us: [email protected]
Visit our website for videos, FAQs and more:
www.atienatech.com
Download or update the Atiena App free from the
App Store or Google Play.
Begin Your Smart Life