Atlas 634/0458 User manual

PDF 件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

PDF 件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

Atlas 4ft6 Headboard
Issue 1 - 09/07/10
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 6400800
Assembly Instructions - Please keep for future reference 634/0458
Dimensions
Width - 145cm
Height - 101cm
634/1952

• Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
page 2.
• Remove all ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• As you unpack and prepare
for assembly, clear an area for
assembly. The parts should be
placed on a carpeted or padded
area to protect them from
damage.
• Parts of the assembly will be
easier with 2 people.
• Do not discard any of the
packaging until you have
checked that you have all the
parts and pack of fittings.
• We do not recommend the
use of power drill/drivers for
inserting screws, as this could
damage the unit. Only use hand
screwdrivers.
• To ensure an easier assembly,
we strongly advise that all
fittings are only
finger tightened
druing initial
assembly. Only
upon completion of
the assembly should all fixing
points be fully tightened.

Components - Panels
Please check you have all the panels listed below
2
If you have damaged or missing components,
call the Customer Helpline:
0845 6400800
End horizontal bar
(dia2.5 x 133.8cm)
2
Headboard upright x 7
(dia1.27 x 39.4cm)
1Middle horizontal bar x 2
(dia2.5 x 144cm)
3
Components - Fittings
Please check you have all the ttings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
Ruler - Use this ruler to help correctly identify the screws
100 20 30 40 50 60 70 80 90 100
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
17mm Bolt x 4
A
80mm Bolt x 6
B
Nut x 4
C
Hex key x 1
D
Connecting bar
(133.8 x 12.4cm)
4Headboard post X 2
(dia6.0 x 52.1cm)
5Leg x 2 (61 x 4cm) 6
E
Wrench x 1

Assembly Instructions
Step 1
Assemble headboard
frame
a: Assemble end
horizontal bar 2and
middle horizontal bars
3to headboard posts
5using bolts Bas
shown in the gure.
Note: The chrome cap
on both posts should be
at the top.
Do not fully tighten
bolts.
b: Insert headboard
uprights 1through
middle horizontal bars 3
to end horizontal bar 2.
c: Attach connecting
bar 4to the headboard
uprights and x to
headboard posts using
bolts B.
3
B
B
a:
b:
c:
B
B
B
B
4
1
1
1
3
2
5
5
2
3

Assembly Instructions
Step 2
Assemble leg
Assemble legs 6to
connecting bar 4using
bolts Aand nuts C.
Note: Re-tighten all the
bolts.
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 6400800
C
C
AA
AA
CC
6
6
4