Owner’s Manual
TSD-MIX42RT
4x2 Mic/Line Mixer
AtlasSound.com– 7 –
Specifications are subject to change without notice.
*ACK-C+AY"LVDs%NNIS4EXAS53!
4ELEPHONEs&AX
Dip Switch Function Identification
Switch Position
Ê UÊ «Ê-ÜÌVÊÊ£ÊÊÓ{6Ê*>ÌÊ*ÜiÀÊ>««iÃÊ«ÜiÀÊvÀÊV`iÃiÀÊVÊ«iÀ>ÌÊÌÊÊ Ê
corresponding input terminal. Down position is ON.
Ê UÊ «Ê-ÜÌVÊÊÓÊÊ«ÕÌÊVÊÀÊiÊ-iiVÌÊvÀÊ«ÕÌÊ}>ÊÃiiVÌÊvÀÊ«ÕÌÊ{°Ê1«Ê«ÃÌÊÃÊi]ÊÊ Ê
down position is Microphone.
Ê UÊ «Ê-ÜÌVÊÊÎÊÊÜÊÕÌÊÌiÀÊi}>}iÃÊ>ÌÊ£ÓxâÊÜÌÊ>ÊÀÊvvÊÀ>ÌiÊvÊ£Ó`Ê«iÀÊVÌ>Ûi°Ê/ÃÊwÌiÀÊ
Ê Ê «iÀ>ÌiÃÊiÌiÀÊÊÌiÊiÊÀÊVÊ`iÊ>`ÊÃÊ>Û>>LiÊÊ«ÕÌÊ{°Ê`i>ÊvÀÊÛV>ÊVÀ«iÃÊÊÊ
to reduce low frequency energy and to increase intelligibility. Down position is ON.
Ê UÊ «Ê-ÜÌVÊÊ{ÊÊ«ÕÌÊÎÊV>ÊLiÊÕÃi`Ê>ÃÊ>ÊÕ`Ê"ÛiÀÀ`iÊÌÊÕÌiÊ«ÕÌÃÊ£ÊEÊÓ°Ê7iÊÃiÌÊÌÊÌi
ON position, if Input 3 receives a signal it will mute Inputs 1 or 2 if they are set to Mute Receive
ON. This is also known as a Juke box Override feature. See DIP SW 5 for delay settings. If the
Ê Ê ÃÜÌVÊÃÊÊÌiÊ"Ê«ÃÌ]ÊÃÌ>`>À`ÊÝÊÃÕ}Ê«ÕÌÃÊ£]ÊÓÊ>`ÊÎÊV>ÊLiÊ`i°ÊNote:Ê6"8ÊEÊÊÊ
Remote CC will also Mute Inputs 1, 2, and 3 if they are assigned to Mute Receive.
Ê UÊ «Ê-ÜÌVÊÊxÊÊÀÀië`ÃÊÜÌÊ*Ê-7Ê{Ê" ÊÃiÌÌ}ðÊ7iÊ«ÕÌÊÎÊÀiViÛiÃÊ>ÊÃ}>ÊÌÊÊ Ê
mute Inputs 1 or 2, you need to select the length of time needed to sustain the mute. This will
depend on the application and/or audio source material triggering the Override function at
Input 3; you may want short or long Mute Delay (hold) time after the signal has stopped at
Input 3 to assure a smooth transition from Input 3 to inputs 1 or 2.
Ê UÊ «Ê-ÜÌVÊÊÈÊÊ«ÕÌÊÎÊÜÊLiÊÕÌi`ÊÜiÊ>Õ`ÊÃÊ«ÀiÃiÌÊ>ÌÊ«ÕÌÊ{ÊÀÊÜiÊÌiÊÕÌiÊÊÊ Ê
pins are shorted together. Down position is mute receive ON.
Ê UÊ «Ê-ÜÌVÊÊÇÊÊ«ÕÌÊÓÊÜÊLiÊÕÌi`ÊÜiÊ>Õ`ÊÃÊ«ÀiÃiÌÊ>ÌÊ«ÕÌÊ{ÊÀÊÜiÊÌiÊÕÌiÊÊÊ Ê
pins are shorted together. Down position is mute receive ON.
Ê UÊ «Ê-ÜÌVÊÊnÊÊ«ÕÌÊ£ÊÜÊLiÊÕÌi`ÊÜiÊ>Õ`ÊÃÊ«ÀiÃiÌÊ>ÌÊ«ÕÌÊ{ÊÀÊÜiÊÌiÊÕÌiÊÊÊ Ê
pins are shorted together. Down position is mute receive ON.
Ê UÊ «Ê-ÜÌVÊÊÊÊ"ÕÌ«ÕÌÃÊivÌÊ>`ÊÀ}ÌÊV>ÊLiÊVw}ÕÀi`ÊvÀÊÃÌiÀiÊivÌÊ>`ÊÀ}ÌÊÀÊVLi`ÊÊ Ê
into a summed mono output. Up position is stereo and down is summed mono.
Ê UÊ «Ê-ÜÌVÊÊ£äÊÊ,iÌiÊiÛiÊÃiÌÃÊÜiÌiÀÊÌiÊÀiÌiÊÛÕiÊVÌÀÊ>`ÕÃÌÃÊ>Ê«ÕÌÃÊÝi`ÊÊÊ
(Inputs 1, 2, 3, and 4) or Inputs 1, 2, and 3 only. Up position is all Inputs, down position is Inputs
1, 2, and 3.
Ê UÊ «Ê-ÜÌVÊÊ££ÊÊ7>Ê*>ÌiÊVÌÛ>ÌÊÊ/ÃÊÃÜÌVÊÃÊÕÃi`ÊvÀÊÌiÊ«Ì>Ê7*8{Ó,/ÊÊ Ê
Ê Ê ÀiÌiÊÜ>ÊVÌÀiÀ°Ê7iÊÌiÊÃÜÌVÊÃÊÊÌiÊ1*Ê«ÃÌ]ÊÌÊÃÊ"]Êi>}ÊÌ>ÌÊ>Ê«ÕÌÃÊÊ
are active to the outputs. When in the ON position the wall controller selects Inputs 1, 2, or 3 to
be at the output of the TSD. Note: Input 4 is always present at the outputs in either mode. Note:
Juke Box Override will not work when Remote Wall Plate is activated.
Ê UÊ «Ê-ÜÌVÊÊ£ÓÊÊ ÌÊ1Ãi`
