Atlona AT-COMP-42M User manual

4 x 2 Component Matrix Switcher
with Digital/Analog Audio
AT-COMP-42M
User Manual
Toll free: 1-877-536-3976
Local: 1-408-962-0515 atlona.com

1. Introduction .................................................. 1
2. Features .................................................. 1
3. Package Contents .................................................. 1
4. Panel Descriptions .................................................. 2
4.1 Front Panel .................................................. 2
4.2 Rear Panel .................................................. 2
5. Connection and Installation .................................................. 3
7. IR Codes .................................................. 4
8. RS232 Control Commands .................................................. 5
9. Safety Information .................................................. 6
10. Warranty .................................................. 7
11. Atlona Product Registration .................................................. 8
ATLONA PRODUCT REGISTRATION
AT-COMP-42M
Atlona 4x2 Component Matrix Switcher
with Digital/Analog Audio
TABLE OF CONTENTS

Atlona Technologies’ AT-COMP-42M is one of the most innovative Component Video Matrix
switcher with Digital/Analog Audio on the market. The AT-COMP-42M has 4 Component
/Optical/Digital Coax and Stereo Audio inputs and 2 outputs.
Because it is a matrix switch, any input can be routed to any output; and the same input can be
routed to all outputs or any other combination. This switch is ideal for connecting sources includ-
ing: (VCRs, Camcorders, Video Game Consoles, DVDs, Satellite Receivers, Set Top Boxes,
Apple TV, etc.) to desired displays such as: (HDTV, LCDs, Plasma Monitors, Video Projectors,
etc.) Selection of inputs can be achieved manually through the front panel, infrared remote
c
distribution of all HDTV video formats up to 1080p as well as digital and analog audio signals.
Video: Component YPbPr/YCbCr/RGB+HV or Composite
Digital: Coaxial S/PDIF Digital Audio (PCM)
Optical: Toslink
Audio: Stereo Audio
t , from f p b
FEATURES:
PACKAGE CONTENTS:
ATLONA PRODUCT REGISTRATION
AT-COMP-42M
Atlona 4x2 Component Matrix Switcher
with Digital/Analog Audio
INTRODUCTION

ATLONA PRODUCT REGISTRATION
AT-COMP-42M
Atlona 4x2 Component Matrix Switcher
with Digital/Analog Audio
Front Panel
1. Power switch: Press top of power switch to turn on. LED will illuminate red to indicate
the switcher is receiving power. Press bottom of power switch to turn powe .
2. LCD display:Conformation and status of each key selection is displayed on the LCD
readout.
3. Keypad (bottom input/top output): Used to select individual output/input
channels or to save/recall preset commands.
Example: Select output channel from the top row of 1-2 keys followed by the input channel from
the bottom row of 1-4 keys. To restore, press OFF key again or select the input to an output again.
4. ALL Key:
1 2 4 6 5 3
5. LOCK Key: Press and hold the LOCK key for 3 seconds to lockout all keypad functionality.
6. Memory/Recall Keys: Used to store or recall presets for inputs and outputs.
Example: Select the desired output and input combination for each audio/video
zone you wish to store as a preset. Select the MEMORY key followed by
a preset location from the bottom row of numbered keys. Selecting
the ENTER key will save the preset memory position.
Example: To recall a preset select the RECALL key, then the number of the
memory preset followed by the ENTER key.
Pressing the LOCK key again will restore keypad functionality.
PANEL DESCRIPTIONS
To transfer an input channel to all output channels or to switch o all input
channels.
Example: To transfer an input to all outputs: Select the ALL key, then select an input followed by
the ENTER key.
Example: To switch o ALL output channels: Select OFF then select ALL followed by the ENTER key.
To restore, press the OFF key again or select the input to an output

AT-COMP-42M
Audio AMP Audio AMP
PC RS232 Control
1VTDH2VTDH
VCR Player HD Player
DVD Player
Satellite Receiver
Audio A
M
Audio A
M
t
e
llit
e
R
ece
i
ver
y
ATLONA PRODUCT REGISTRATION
AT-COMP-42M
Atlona 4x2 Component Matrix Switcher
with Digital/Analog Audio
CONNECTION and INSTALLATION

IR Codes (NEC Format for use with universal remote control):
IR CODES
ATLONA PRODUCT REGISTRATION
AT-COMP-42M
Atlona 4x2 Component Matrix Switcher
with Digital/Analog Audio
Input / Output Digital : Digital Audio(S/PDIF), Composite Video
Video Bandwidth
HDTV Scan Rate 480I, 480P, 576P, 1080I, 720P, 1080P
Optical
Digital (S/PDIF)
Stereo Audio (AR/AL)
Channel switch time 25ns
Industrial Temp. Range -40oC to +85oC
Hostile Crosstalk
Dimensions (W.D.H.) 17.32” (W) x 7.80” (D) x 1.23” (H)
Power Consumed DC+12
3 lb.
V, @500mA~2000mA, 6 Watt (max.)
SPECIFICATIONS

ATLONA PRODUCT REGISTRATION
AT-COMP-42M
Atlona 4x2 Component Matrix Switcher
with Digital/Analog Audio
RS232 - Cable Pin Lines
PROTOCOL COMMANDS
Baud Rate : 9600 bps, Data Bit :8
bits, Parity : None, Stop Bit :1 bit
•
Each command is terminated with a
Carriage Return
•
Each feedback is terminated with a
Carriage Return
•
Code entry is CASE SENSITIVE.
•
Do not insert spaces between letter/
number code entries.
Note1: Feedback for a command
repeats the original command.
Example, if x1$ is a command, the
feedback is the same and if the
command is x2$, the feedback
would also be x2$.
Note2: If command fails, the
feedback should be "Command
FAILED”.
Command Description Feedback
PWON Power ON PWON
PWOFF Power OFF PWOFF
All# Reset all input signals to matching output. (Input 1 to Output 1, Input 2 to
Output 2, etc…) All#
x1$ Switch OFF specificed output channel [1]. If Output channel is 2 the command
would be x2$ x1$
x1AVx2 Switch specified input to output. If input is 5 and output is 3, then command
would be x5AVx3 x1AVx2
x1AVx2,x3,
x4
Switch specified input to mu ple outputs. If input is 5 and outputs are 6, 7, 8,
then the command would be x5AVx6,x7,x8 x1AVx2,x3,x4
Statusx1 Display input currently routed to specified output. Example Statusx1 is asking
what input is currently being routed to Output # 1 x7AVx1
Status Display current rou ng for all inputs and outputs
x1AVx1,
x2AVx2,
x3AVx4,
x5AVx8, …
Save[Y] Save the current rou ng to a preset command [Y]. [Y] ranges from 0 to 9 Save2
Recall[Y] Recall the preset command [Y]. [Y] ranges from 0 to 9 Recall2
Clear[Y] Clear the preset command [Y]. [Y] ranges from 0 to 9 Clear2
Mreset Reset device to manufacture default Mreset

TION
ATLONA PRODUCT REGISTRATION
AT-COMP-42M
Atlona 4x2 Component Matrix Switcher
with Digital/Analog Audio
Safety Information
Safeguards
Precautions
not expressly approved by the manufacturer, could void the user’s authority to operate this
equipment.
Operate this product using only the included external power supply. Use of other power supplies
In the event of an electrostatic discharge this device may automatically turn off. If this occurs,
unplug the device and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed on
or against them. Be especially careful of plug-ins or cord exit points from this product.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements,
Unplug the product before cleaning. Use a damp cloth for cleaning and not
Never open, remove unit panels, or make any adjustments not described in this manual.
Attempting to do so could expose you to dangerous electrical shock or other hazards. It may
also cause damage to your AT-COMP-42M. Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona
reseller or contact Atlona directly.
To reduce the risk of electric shock, do not
expose this product to rain or moisture
-
cal power socket, hire an electrician to
replace your obsolete socket.
Do not modify the wall plug. Doing so
will void the warranty and safety features.
This equipment should be installed near
the socket outlet and the device should be
easily accessible in the case it requires
disconnection.

ATLONA PRODUCT REGISTRATION
AT-COMP-42M
Atlona 4x2 Component Matrix Switcher
with Digital/Analog Audio
Limited Warranty
Atlona Technologies warrants that (a) its products (the AT-COMP-42M) will perform
substantially in accordance with the accompanying written materials for a period of 3 years
from the date of receipt and (b) that the product will be free from defects in materials and
workmanship under normal use and service for a period of 3 years. In the event applicable law
imposes any implied warranties, the implied warranty period is limited to 3 years from the date
of receipt. Some jurisdictions do not allow such limitations on duration of an implied warranty,
so the above limitation may not apply to customers that fall within those areas.
Customer Remedies
Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy
shall be, at Atlona Technologies’ decision, either return of the price paid for the product, repair,
or replacement of the product that does not meet this Limited Warranty and which is returned
to Atlona Technologies with a copy of the Customer’s receipt. This Limited Warranty is void if
failure of the product has resulted from accident, abuse, misapplication, or natural occurrence.
In example but not limited to: power surges (electrical storms, local power outage), dropping
or punching). Any replacement product will be warranted for the remainder of the original
warranty period.
No other warranties
To the maximum extent permitted by applicable law, Atlona Technologies and its suppliers
disclaim all other warranties, either expressed or implied, including, but not limited to, implied
Customers may have other rights depending on the jurisdiction.
No liability for damages
To the maximum extent permitted by applicable law, in no event shall Atlona Technologies
or its suppliers be liable for any damages arising out of the use of or inability to use this product,
even if Atlona Technologies has been advised of the possibility of such damages. Such damages
include but are not limited to: special, incidental, consequential, or indirect damages for
other pecuniary loss. Atlona Technologies’ and its suppliers’ entire liability under any provision
of this agreement shall be limited to the amount actually paid by you for the product. Some
Jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental
damage. The above limitations may not apply to you in such jurisdictional cases.
Warranty

ATLONA PRODUCT REGISTRATION
Atlona Product Registration
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra
few moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure
At Atlona, we respect and protect your privacy, assuring you that your registration
information is completely secure. Atlona product registration is completely voluntary and failure to
register will not diminish your limited warranty rights.
AT-COMP-42M
Atlona 4x2 Component Matrix Switcher
with Digital/Analog Audio