Atlona AT-HDR-H2H-44M User manual

Installation Guide
1
AT-HDR-H2H-44M
4K HDR 4×4 HDMI to HDMI Matrix Switcher
AT-HDR-H2H-44M
1 x AT-HDR-H2H-44M
1 x Captive screw connector, 5-pin
1 x 24V DC power supply
1 x Pair mounting ears w/screws
4 x Feet w/screws
1 x IR remote control
1 x Installation Guide
Package Contents
The Atlona AT-HDR-H2H-44M is a 4×4 HDMI matrix switcher for high dynamic range (HDR)
formats. It is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma
sampling, as well as HDMI data rates up to 18 Gbps. The HDR-H2H-44M is ideal for residential
applications with the latest as well as emerging 4K/UHD and HDR sources and displays. It
is compatible with all video resolutions, audio formats, and color space formats supported
in the HDMI 2.0b specication, plus the ability to pass metadata for HDR content. The HDR-
H2H-44M includes EDID and HDCP management features, and can send CEC display control
independently to each output. A TOSLINK digital audio output is paired with each HDMI output
for sending de-embedded HDMI audio to an AV receiver or soundbar. The HDR-H2H-44M can be
controlled via Ethernet, RS-232, and IR. A handheld IR remote control is included.
IMPORTANT: Visit http://www.atlona.com/product/AT-HDR-H2H-44M for the latest rm-
ware updates and User Manual.

Installation Guide
2
AT-HDR-H2H-44M
1 Function Buttons
Power - Sets the unit in and out of
standby.
Enter - Used for making selection within
the front panel OSD.
FNC - Use to switch number buttons to
their secondary function.
CANCEL - Navigates back one step in the
front panel OSD.
2 Number Buttons
Use for selection of inputs and outputs.
1- Press FNC + 1 to route selected input
to all outputs.
2- Press FNC + 2 to turn the IR receiver
window on and o.
3- Press FNC + 3 to open the EDID menu.
4- Press FNC + 4 to display the device
rmware. Press 4 again to view IP, IP port,
and MAC.
3 HDMI IN
Connect HDMI cables to these ports from
HDMI sources.
4 S/PDIF OUT
Connect an optical audio cable from this
TOSLINK port to an audio input device.
5 HDMI OUT
Connect an HDMI cable from this port to
an HDMI display, extender, or switcher.
Only two-channel audio is supported.
6 LAN
Connect an Ethernet cable from this port
to a Local Area Network (LAN). This port
provides access to the webGUI or TCP/
IP control.
7 FW
Connect a mini USB cable to this port to
update the rmware.
8 Control Port
Connect a third party controller or PC
to control the matrix through either IR or
RS-232
9 DC 48V
Connect the included 48V DC power
supply to this power receptacle.
Panel Descriptions
3 5
4
6 7 8 9
AT-HDR-H2H-44M
1 2 3 4
RS-232 IR IN
HDMI IN LAN FW DC 24VSRX TXOUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4
AT-HDR-H2H-44M
12
34 POWER
FNC EDID INFO
ENTER
CANCEL
12
Pin out will be determined by the
RS-232 cable and connect as
RX (receive), TX (transmit) and
(Ground).
A 5-pin captive screw connector for control has been included. The rst three terminals are RS-
232 control, the last two terminals are for IR.
IR IN is connected by a ground and
signal wire. Use with 3rd party control
systems. For easy termination, Atlona
recommends using the 2 meter IR
cable AT-LC-CS-IR-2M.
Control
RS-232 IR
GND S
GND RX TX
GNDRX TX

Installation Guide
3
AT-HDR-H2H-44M
AT-HDR-H2H-44M
12 3 4
RS-232 IR IN
HDMIIN LAN FW DC24V
SRXTX
OUTPUT1 OUTPUT 2 OUTPUT3 OUTPUT 4
AT-HDR-H2H-44M
12
3 4POWER
FNC EDID INFO
ENTER
CANCEL
AT-HDR-H2H-44M
1 2 3 4
RS-232 IR IN
HDMI IN LAN FW DC 24V
SRX TX
OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4
AT-HDR-H2H-44M
12
34
POWER
FNC EDID INFO
ENTER
CANCEL
Mounting Instructions
The AT-HDR-H2H-44M can be mounted in a standard 19-inch rack or placed freestanding on top
of a desk or table.
Rack installation
1. Remove the front two case screws from the sides of the case.
2. Attach the included rack ears to each side of the AT-HDR-H2H-44M using the case screws.
3. Install the HDR-H2H into a rack, using four rack screws.
AT-HDR
NOTE: Increase the air ow as needed to
maintain the recommended temperature
inside the rack.
NOTE: Do not exceed the maximum weight
loads for the rack. Install heaver equipment in
the lower part of the rack for stability.

Installation Guide
4
AT-HDR-H2H-44M
Surface mounting
The AT-HDR-H2H-44M can be placed freestanding on top of a desk, a table, or in a cabinet. To
prevent damage to the surfaces or unnecessary movement of the matrix, four feet have been
included.
1. Turn the unit upside down.
2. Install each foot using the included feet screws, the rubber grips of the feet should be facing
up during installation.
3. Turn the unit right-side up and place it in the desired location.
AT-HDR-H2H-44M
12
34
POWER
FNC EDID INFO
ENTER
CANCEL

Installation Guide
5
AT-HDR-H2H-44M
1. Connect up to 4 HDMI sources to the HDMI IN ports.
2. Connect up to 4 HDMI displays to the HDMI OUT ports.
3. For control, connect to the captive screw port for IR and RS-232, or the LAN port for TCP/
IP and webGUI.
4. Connect the included 24V power supply to the DC 24V port.
5. Connect the power supply to an AC outlet.
Installation
WebGUI
The AT-HDR-H2H-44M includes a built-in webGUI, which allows easy management and control
of all features. Follow the instructions below to access the webGUI.
1. View the IP address of the unit using the front panel OSD.
• Press the FNC button.
• Press button 4 (INFO). The rmware version will display on the front panel screen.
• Press button 4 again to bring up the IP address.
2. Launch a web browser and enter the IP address of the unit.
3. The AT-HDR-H2H-44M Login page will be displayed.
4. Enter the following information on the Login page.
Login: root
Password: Atlona
5. Click the Login button.
NOTE: If there is no IP address or the unit is not connected to a DHCP network, press
and hold buttons 1 + 2 for 5 seconds to switch the unit to a static IP address. The default
static IP address is 192.168.1.252.

Installation Guide
6
AT-HDR-H2H-44M
Connection Diagram
DC5V HDBaseT IN HDMIOUT
DC5V HDBaseTOUT HDMIIN
Video
AT-HDR-EX-70-2PS-TX AT-HDR-EX-70-2PS-RX
AT-HDR-H2H-44M
Display
Display
Soundbar
Video
Audio
Control
Video
Video
Video
Video
Video
HDBaseT
Set-Top Box
Automation
Control System
Media Player
Projector
Blu-ray Player
SET-TOPBOX
OK
224
2
COM
NC
NO
COM
NC
NO
COM
NC
NO
COM
NC
NO
+12V
SIG
GND
+12V
SIG
GND
+12V
SIG
GND
+12V
SIG
GND
1
COMPONENT
HDMI
1
2
3
4
5
6
SERIAL1
IROUT SERIAL2
L
R
DIGITAL
COAXOUT
AUDIOOUT AUDIOIN ETHERNET
2 3 4
VIDEOOUT
48VDC
FACTORY
RESET
4
media4
AT-HDR-H2H-44M
1 2 3 4
RS-232 IR IN
HDMIIN LAN FW DC24V
SRXTX
OUTPUT1 OUTPUT2 OUTPUT3 OUTPUT 4
AT-HDR-H2H-44M
12
34
POWER
FNC EDID INFO
ENTER
CANCEL

Installation Guide
7
AT-HDR-H2H-44M
Troubleshooting
Problem Solution
I am not receiving
multichannel audio or 3D
video.
• By default, multichannel audio and 3D will not pass
unless all devices support those features. Set each port’s
EDID through the front panel, webGUI, or RS-232.
What rmware am I on? • To view the device rmware version, press the FNC
button, followed by button 4 (INFO). The rmware will
appear on the front panel OSD.
What’s my baud rate? • To view the baud rate of the RS-232 port, press the FNC
button, followed by button 4, then press button 2. The
baud rate will appear on the front panel OSD.
What’s my IP? • To view the IP address of the unit, press the FNC button,
followed by the 4 button twice.
• If the unit is connected to a non-DHCP network, press
and hold the 1 + 2 button for 5 seconds to switch to
a static IP address. The default static IP address is
192.168.1.252.

Installation Guide
8
AT-HDR-H2H-44M
© 2017 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered
trademarks are the property of their respective owners. Pricing, specications and availability subject to change without notice. Actual products, product images, and
online product images may vary from images shown here.
Version 1
atlona.com •408.962.0515 •877.536.3976