Atlona At-comp13 User manual

AT-COMP13 is a high performance and versatile

distribution amplifier for delivering both

HD and SD video to your multiple display units.

Operation Manual

Atlona HDTV Distributor up to 1080p/UXGA

Application

The AT-COMP13 is capable of distributing video in 3 different formats

and is ideal for use in analog video entertainment distribution

system.

Features

This package includes

- One CHDD-3 unit.

- One set of power supply

- One user manual

- One set of 3BNC male to 3BNC male cable

Specifications

Connection and Installation

Plasma Monitor 2 Plasma Monitor 3 Plasma Monitor 1

DVDDVD

component

out

1. Works as a 1-in 3-out distribution amplifier for HD component source(YPbPr).

2. Works as a 1-in 3-out distribution amplifier for HD RGsB (Sync on Green)

video source.

3. Works as a three 1-in 3-out distribution amplifier for composite

video source.

* Input: YPbPr x 1 or RGsB x 1 (or RGBHV),

or composite x 3 1 Vp-p@ 75 ohm

* Output: YPbPr x 3, or RGsB(or RGBHV) x 3, or composite 3 x 3

* Horizontal/Vertical sync 5Vp-p max and H frequency

10KHz~100KHz, V frequency 20Hz~200Hz.

* Bandwidth: 480MHz (-3dB)

* Differential gain: 0.05%

* Differential phase: 0.05 degree

* Power: 5V 2A~1A

* Dimension:141(W) x 38(D) x 105(H)mm

* Weight: 550gs

Also available: AT-COMP13A with audio.

- Component/ composite or RGB distribution amplifier.

- Supports SD (composite, YCbCr) and HDTV (YPbPr, RGsB)

input signal.

- Accepts one component input and splits the input to

3 identical and buffered outputs via 3x3 RCA connectors.

- When input is composite video, it can connect up to 3 different

video sources and output three identical and buffered signal

for each video input.

- It can be used for presentation and home theater application.

- High bandwidth performance - 480MHz bandwidth at -3dB

- Worldwide power supply

component

out

DVD

RGsB

out

CV3 out CV2 out CV1 out

CV3 in CV2 in CV1 in