ATMCO....YOUR ASSURANCE
1. That every tool manufactured by ATMCO is hand assembled and tested before
shipment.
2. That compliance with applicable safety standards is assured through inspection &
testing.
3. That every tool has with it adequate instructions and a list of safety rules for the
protection of the user.
WARNING: Basic safety precautions should always be followed to reduce the risk of
personal injury including the following items Read all instructions and save for future
reference
SAFETY INSTRUCTIONS FOR ALL HAND TOOLS
1. KNOW YOUR TOOL: Read the owners manual carefully. Learn it’s applications as
well as the specific potential hazards peculiar to the model LB-100 DIN rail cutter.
2. KEEP WORK AREA CLEAN: Cluttered areas & work benches invite accidents.
3. AVOID DANGEROUS ENVIRONMENTS: Keep work area well lit.
4. KEEP VISITORS AWAY: All visitors should be kept a safe distance from the work
area. Do not let visitors operate tool.
5. STORE IDLE TOOLS: When not in use, tool should be kept in a dry safe place.
6. DON”T FORCE TOOL: Remove any chips which may get caught in the die with a
screw driver or other similar device.
7. USE THE RIGHT TOOL: Do not use the Model LB-100 for the !
purpose of cutting rail it was not designed to cut.
8. WEAR PROPER APPAREL: Avoid loose clothing or jewelry !
which could get caught in moving parts.
9. ALWAYS USE SAFETY GLASSES: At all times.
10. SECURE TOOL: Secure tool to a solid work top using lag bolts or other similar
device.
