1 2 3 4 6
Get the app
Download the Atomi Sma app
from the App Store or Google Play.
Register
Follow the on-screen instructions
and register an account.
Add your sma device
Press “Add Device” or the “+” sign and choose
the sma device to install from the device list.
Connect to the network
Press “Go to Connect” and follow
the instructions on the screen.
v1.02/20
atomi sma
GET
Register Go to ConnectAdd Device
WiFi
Password
Confirm
Select the right network
Enter your WiFi password and “Confirm”.
Make sure you’re connected to a 2.4GHz WiFi network
(Atomi Sma can’t connect to 5GHz networks).
5
WiFi
Timer
ECO
High
Low
F
Let’s get staed!
TO AVOID THE RISK OF AN ELECTRICAL SHOCK, always make sure that the
Sma Heater is unplugged from the electrical outlet before relocating,
servicing, or cleaning it.
CAUTION: To prevent an electric shock, match wide blade of plug to wide
outlet slot and fully inse.
When using electrical appliances, basic safety precautions should always be
followed to reduce the riskof fire, electric shock, and/or injury to people,
including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
2. The Sma Heater is hot when in use.To avoid burns, do not let bare skin
touch the hot suaces. Use the back handle of the heater when moving.
Keep combustible materials such as furniture, pillows, bedding, papers,
clothes, and cuains at least three feet (0.9 m) away from the front of the
heater and keep them awayfrom the sides and rear.
3. Extreme caution is necessarywhen the heater is being used by or near
children and whenever the heater is le operating and unaended.
4. Do not operate if the cord or plug has been damaged, if the heater
malfunctions, or if it has been dropped or damaged in any manner.
5. Do not use outdoors.
6. The Sma Heater is not intended for use in bathrooms, laundry areas, nor
similar indoor locations. Never place the heater where it may fall into a
bathtub or water container.
7. Do not run the cord under carpeting. Do not cover the cord under throw
rugs, runners, or similar coverings. Do not route the cord under furniture or
appliances. Arrange the cord away from high-trac areas where it could
be tripped over.
8. To disconnect the Sma Heater, turn controls to “O”, then remove the
plug from the outlet.
9. Connect to standard outlets only.
10. Do not inse or allow foreign objects to enter anyventilation or exhaust as
this may result in an electric shockor fire. It may also damage the Sma
Heater.
11. To prevent possible fire, do not block air intakes or exhaust in any manner.
Do not use on so suaces like a bed where openings may be blocked.
POLARIZED PLUG
This Sma Heater has a polarized plug (one blade is
wider than the other).
As a safetyfeature to reduce the riskof electrical
shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fully inse into the
outlet, try reversing plug.
IMPORTANT SAFEGUARDS 12. The Sma Heater has hot and arcing or sparking pas inside. Do not use
it in areas where gasoline, paint, or flammable liquids are used or stored.
13. Use this Sma Heater only as described in this user manual. Any other
use not recommended by the manufacturer maycause fire, electric
shock, or injury to people.
14. Always plug the Sma Heater directly into a wall outlet/receptacle. Never
use it with an extension cord or relocatable power tap (outlet/power strip).
NOTE: This appliance is for HOUSEHOLD USE ONLY.
ELECTRIC POWER
If the electric circuit is overloaded by other appliances, yourSma Heater
and/or appliances may not operate properly. The Sma Heater should be
operated on a separate electrical circuit from other operating appliances.
Before you begin
1. Remove tie from the power cord and unravel the cord. Keep the plastic
wrapping away from children.
2. Place the Sma WiFi Ceramic Tabletop Heater on the floor in the desired
location.
3. Know your Wi-Fi network and password.
4. Make sure that you are operating on:
• iPhone®8 or higher and iOS®8 or higher.
Any previous iPhone®or iOS®may experience slower connections.
• Android™ 4.1x or higher.
5. Make sure that you’re connected to a 2.4GHz Wi-Fi network (Atomi Sma
app can’t connect to 5GHz networks).
List of main pas
Control Buons
Control
Buons
Heat
Output
Intake
Ven t
Power
Switch
WiFi
Timer
ECO
High
Low
F
Swing/Oscillation
Heater will rotate
80 degrees backand
foh when pressed.
Timer
Set timer to run from
1-12 hours. When using
this seing, heater will
power o aer the
selected hours.
Mode
Press to change
from LOW and HIGH.
Wi-Fi Buon
LED Display
ON/OFF
Temperature
Control
Set desired room
temperature.
Temperature will
blink while adjusting.
The heater may take
up to five seconds to
respond.
Sma WiFi
Ceramic Tabletop Heater
QuickSta Guide Plug in your sma device
Use the switch on the back to turn it on
and press “Continue” on the Atomi Sma app.