ATV VLBTIR User manual

VLBTIR
Waterproof Infrared
Illumination Camera
Instruction Manual
VER.:1.0, NO.: R040057A

1
Thank you very much for purchasing our product. Before operating this
product, please read this instruction manual carefully to ensure proper use.
1. Safety Precautious
CAUTION
RISK OF ELECTRIC
SHOCK. DO NOT OPEN!
CAUTION : TO REDUCE THE RISK OF ELECTRIC
A
L SHOCK, DO NOT OPEN CO
V
ERS.
NO USER SER
V
ICEABLE P
A
RTS INSIDE. REFER SER
V
ICING TO QUALIFIED
SER
V
ICE PERSONNEL.
Disposal of Old Electrical & Electronic Equipment (Applicable in
the European Union and other European countries with separate
collection systems).
When in use, please avoid camera window directly contacting the eyes
and do not touch the camera body, for it can be heated up to 70℃.
When installing the camera, please avoid pointing it directly to paper or
flammable materials.
Although the camera is provided with tempered glass, please
avoid all direct contact to eliminate contamination, and use cotton
balls dipped in cleaning alcohol to clean the window.
2. Description
This inbuilt Infrared Illuminator camera uses a high sensitive 1/3”
(1/4”) interline transfer Charge Coupled Device (CCD) image sensor,
and all state circuitry, which provides extremely long life and high
reliability. This camera offers excellent image quality and functions
with low lag and high burn resistance, and is not subject to distortions
from magnetic fields.
Highly resistant to shock and vibration and easy to install, this
camera is an excellent choice for your CCTV system.

2
3. Feature
Built-in high quality CCD camera and high performance infrared
illuminator module.
Total pixels of sensor: NTSC=380K / PAL=440K pixels.
High sensitivity, low smear, excellent anti-blooming, and high S/N ratio.
Supports functions: Auto Electronic Shutter (AES), Auto Gain
Control (AGC), Auto White Balance (AWB), Back Light
Compensation (BLC), and Flickless mode (FL).
Special functions: Mirror (Option), Positive/Negative (Option).
Built-in board Lens and furnished with mounting bracket.
DC type power request, low power consumption.
Dual Window Structure to Prevent Reflection and Diffusion of
Infrared Light.
3-Axis Concealed Cable Bracket.
Waterproofing criterion: IP68.
4. Content
Item Name of Part Quantity
1 Infrared Camera 1
Appurtenances Bag 1
A Fix Retaining Screw for Bracket 3
2 B Anchor 3
3 Instruction Manual 1

2
5. Installation & Operation
1. Inst all Preparation
Drill holes on wall if wires need to go through the wall.
2. Inst all Camera
Use the 3 screws provided to attach the camera and bracket to the
ceiling, surface or wall.

3
3. Adjust 3-Axis Bracket
Adjust the bracket while checking the view angle from the monitor.
Loosen the bracket lock knob by turning counterclockwise, after
adjusting the 3-Axis bracket (X-Y-Z Axis) to get the desired
viewing angle, tighten the lock knob by turning it clockwise.
4. Inst all Sunsheid
To install the sunshield, please follow the instruction shown below:

4
6. SPECIFICATIONS
According to the camera purchased, select and refer to the appropriate specification below:
Color Camera
Image Device 1/3” Color CCD
(Sony Chipset)
1/3” Hi-Res.
Color CCD
(Sony Chipset)
1/3” Hi- Res.
CCD
1/3” Ultra Hi- Res.
Color CCD
(Sony Chipset)
1/4” Color CCD
(Sony Chipset)
Picture Elements NTSC: 510x492
PAL: 500x582 NTSC: 768x494 PAL: 752x582 NTSC: 510x492 PAL: 500x582
Resolution 380 TVL 420 TVL 470 TVL 540 TVL 550 TVL 380 TVL
Min Illumination 0.02Lux/ F2.0 (Day)
0Lux (IR On) 0.03Lux/ F2.0 (Day) 0Lux (IR On) 0.04Lux/ F2.0 (Day) 0Lux (IR On) 0.03Lux/F2.0(Day) 0Lux(IROn)
S/N Ratio More than 48dB
Electronic Shutter NTSC: 1/60S~1/100,000S
PAL: 1/50S~1/100,000S
Gain Control Auto
White Balance Auto
Scanning System Interlace 2:1
Gamma 0.45
Lens Furnished Board Lens
Sync System Internal
Video Output 1Vp-p/ 75 Ohms
Power Supply DC 12V±10％
IR OFF 120mA
max. 75mA max. 120mA max. 75mA max. 180mA max. 75mA max.
Power
Consumption 24 IR
LED ON 340mA
max. 295mA max. 340mA max. 295mA max. 400mA max. 295mA max.
Infrared Illuminator Module
Infrared Luminary 24 IR LED
Wavelength 850nm
Illuminant Distance 20 M
Power Supply DC 12V±10％
Power Consumption 3 W
System Device
Operating Temp. -10℃to 50℃(14℉to 122℉)
Construction Aluminum Case
Waterproofing Criterion IP 68
Dimensions φ53x58 (L) mm (Body only)

5
B/W Camera
Image Device 1/3” B/W CCD
(Sony Chipset) 1/3” Hi-Res. B/W CCD (Sony Chipset) 1/3” B/W CCD
Picture Elements EIA: 510X492
CCIR: 500x582 EIA: 768x494 CCIR: 752x582 EIA: 510X492 CCIR: 500x582
Resolution 420 TVL 600 TVL 400 TVL
Min Illumination 0.01Lux/ F2.0 (Day)
0Lux (IR On) 0.02Lux/ F2.0 (Day) 0Lux (IR On) 0.03Lux/ F2.0 (Day) 0Lux (IR On)
S/N Ratio More than 48Db
Electronic Shutter EIA: 1/60S~1/100,000S, CCIR: 1/50S~1/110,000S
Gain Control Auto
Scanning System Interlace 2:1
Gamma 0.45
Lens Furnished Board Lens
Sync System Internal
Video Output 1Vp-p/ 75 Ohms
Power Supply DC 12V±10％
IR OFF 120mA max. 100mA max.
Power
Consumption 24 IR
LED ON 340mA max. 360mA max.
Infrared Illuminator Module
Infrared Luminary 24 IR LED
Wavelength 850nm
Illuminant Distance 20 M
Power Supply DC 12V±10％
Power Consumption 3 W
System Device
Operating Temp. -10℃to 50℃(14℉to 122℉)
Construction Aluminum Case
Waterproofing Criterion IP 68
Dimensions φ53x58 (L) mm (Body only)
(Note: Design and specifications are subject to change without prior notice.)