ATZ HDMI-414PR User manual

pg. 1 All specifications are subject to change without prior notice.
© Copyright ATZ 2015
Model :ATZ HDMI-414PR
Description:4 to 1 HDMI PIP Switch V1.4 w/Remote
Introduction
This range of high performance HDMI switch provide four HDMI in to one HDMI output
and supports PIP, 4K×2K, 3D, Deep Color. With its 3Gbps bandwidth and the additional
features of the latest HDMI standards you can be sure of great HDMI SWITCH.

pg. 2 All specifications are subject to change without prior notice.
© Copyright ATZ 2015
Model :ATZ HDMI-414PR
Description:4 to 1 HDMI PIP Switch V1.4 w/Remote
Features
1. 4 HDMI input signal switch to 1 HDMI sink device.
2. HDCP 1.4 protocol compliant.
3. 3D HDMI 1.4a video format support.
4. Support PIP (Picture in picture), contain 1 main picture and 3 sub-pictures.
5. 3D video support including Frame packing for all 3D formats up to a 297MHz TMDS
clock.
6. Support display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
7. Support deep color 30bit, 36bit, 48bit per pixel.
8. Digital audio format, as DTS-HD/Dolby-true-HD/LPCM 7.1/DTS/Dolby-AC3/DSD.
Package:
1. HDMI Switch ----------------------------------------------------------- 1PCS
2. 5V1A DC Power Supply adaptor -------------------------------------- 1PCS
3. Remote Controller ----------------------------------------------------- 1PCS
4. Operation Manual ------------------------------------------------------ 1PCS
Specifications
Frequency Bandwidth
2.97Gbps
HDMI Switch Input Ports
4 x HDMI Female input port
HDMI Switch Output Ports
1 x HDMI Female output ports
Power Supply
DC 5V 1A
ESD Protection
Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm)
65(W) X 118 (D) X 25 (H)
Weight
120g
Operating Temperature
0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature
-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity
20 ~ 90% RH (Non-condensing)
Power Consumption
1W
Operation controls and Functions
Front Panel:

pg. 3 All specifications are subject to change without prior notice.
© Copyright ATZ 2015
Model :ATZ HDMI-414PR
Description:4 to 1 HDMI PIP Switch V1.4 w/Remote
1. POWER: This red LED illuminates when the device is connected with power supply.
2. SWITCH: Press this button to select the input source.
3. IR: Remote control signal receive.
4. OUTPUT LED: this green LED illuminate when TV plug in over HDMI cable.
5. INPUT LED: These bi-color LED describe corresponding status. That green illuminate
indicates that the signal has plus in and has been selected, that red illuminate indicates
that the signal has plus in bus has not been selected, LED get dark indicates that the
signal has not plus in.
Rear Panel:
1. HDMI INPUT: This slot is where you connect the HDMI source output from DVD, PS3.
Left Panel:
1. HDMI OUTPUT: HDMI signal output, connect to TV over a HDMI cable.
2. DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to AC wall
outlet.

pg. 4 All specifications are subject to change without prior notice.
© Copyright ATZ 2015
Model :ATZ HDMI-414PR
Description:4 to 1 HDMI PIP Switch V1.4 w/Remote
Remote control:
1. Select input signal to be showed on the TV.
2. No function in this HDMI 4X1 Switch.
3. PIP operation area: PIP: Open/close the PIP function.
SEL: Select a sub-picture to be main picture.
Enter: Enter the sub-picture which has been selected to be
main picture.
4. No function in this HDMI 4X1 Switch.
Application Example: