Audeara A-01 User manual

3. ACTIVATE DISCOVERY MODE
In order to pair the headphones with
your device, you must irst put them
in to discovery mode. You must be
using Bluetooth to create your hearing
proile through the Audeara app.:
1. TURN HEADPHONES ON
Turn headphones on by licking the
power switch up on the left ear cup.
The blue indicator LED will start lashing.
2. ACTIVATE PAIRING
Hold down the multifunction button
for three seconds. The LED indicator
will start lashing blue and red and you
will hear the headphones say “pairing
mode active”.
1. CHARGE THE BATTERY
1. INSERT CABLE
Connect the headphones to
a USB power source to charge
the internal battery. Time to
fully charge is 6 hours.
2. CHARGING
While the headphones are
charging, the LED indicator
will be RED.
3. FULLY CHARGED
When charging is complete,
the LED indicator will be BLUE.
Note: You will be unable to listen to your headphones while they are charging
due to International Safety regulations.
audeara.com
Power
on/o switch
Multifunction
button
A  01
Quickstart Guide

OVERVIEW
Active Noise
Cancelling
on/o switch
USB charging
port
Active Noise
Cancelling
indicator LED
Auxiliary cable
port
Headphone
controls
Power
indicator LED
Power
on/o switch
2. DOWNLOAD OUR APP
Download the Audeara app from
Play Store (Android users) or
App Store (Apple users).
5. PERSONALISE YOUR HEADPHONES
Once your headphones are paired,
open the Audeara app and follow the
onscreen instructions to personalise
your headphones to your unique
hearing proile.
Personalisation needs power. When
powered on your headphones will be
personalised in Bluetooth or wired
mode. If you run out of battery, you can
turn them o and use them in normal
wired mode.
We love to hear your feedback and we are here to help.
Head to audeara.com/support to get in contact with us.
SUPPORT & FEEDBACK
4. PAIR WITH YOUR DEVICE
For iOS devices:
tap Settings > Bluetooth.
For Android devices:
tap Settings > Connections > Bluetooth.
Make sure Bluetooth is turned on.
Your phone or tablet will show all
available nearby Bluetooth devices.
If you have placed your headphones in
discovery mode, they should appear in
the list as “Audeara A01”. If you don’t
see them, refer to the previous page.
Tap on “Audeara A01” to pair.
Upon successful pairing, the power
LED indicator will stop lashing and
remain blue.

Audeara Pty. Ltd.
audeara.com
Features, specifications and appearance are subject to change without notice.
A-01 Headphones
Product Safety Information

FCC AND IC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
CAN ICES3(B)/NMB3(B)
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help
FCC Caution: Changes or modiications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
ROHS COMPLIANCE
This product is in compliance with the European Union’s Restriction
of Use of Hazardous Substances in Electrical and Electronic
Equipment (RoHS) Directive 2011/65/EU.
IC COMPLIANCE STATEMENT
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES3(B)/NMB3(B)
IC DECLARATION DE CONFORMITÉ
L’émetteur/récepteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes:
1. L’ appareil ne doit pas produire de brouillage;
2. L’ appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’ en compromettre le
fonctionnement.
CAN ICES3(B)/NMB3(B)
WEE NOTICE
This symbol on the product indicates that the product must not
be disposed of with normal household waste. Instead, it is your
responsibility to dispose of your waste equipment by arranging
to return it to a designated collection point for the recycling of
waste electrical and electronic equipment. By separating and
recycling your waste equipment at the time of disposal you will
help to conserve natural resources and ensure that the equipment
is recycled in a manner that protects human health and the
environment.
Audeara oers our customers the opportunity to return products at
the end of their functional lives to Audeara for recycling, qualifying
products are marked with the WEEE symbol shown above. Delivery
cost of any authorised product returned to Audeara will be at the
expense of the sender.