Audi Q5 2014 User manual

Quick Reference Guide

2014 Audi QS I SQS Aud i (,' t " i

,..I~:(}

Vorsprung durch Technik C:J}~ '

https://www.automotive-manuals.net/

This Quick Reference Guide provides you with a brief overview

of selected procedures and funct ions in your vehicle. It does

not replace t he Owner's Manual wit h its importa nt explanat ions

and warnings. .-

Cockpit -------

O Light switch and

0 Hood release instrument lighting

8 Release button for

Data LinkConnector

luggage compartment for On Board

8 Power windows Diagnostics (OBDII)

&_WARNING G) Cruise control or

adaptive cruise

Be careful when closing the control

windows. Checkto see that no

one is in the way, or serious f>Turn signal and

personal injury could result. high beam lever

0 Adjusting the

tiptronic shift buttons

e) Multifunction steering

exterior mirrors

8 Memory seat buttons wheel controls

fl; Instruments and

Cl)Door handle indicator lights

O Central locking switch /

Windshield wiper controls

0 Side assist and trip computer buttons

https://www.automotive-manuals.net/

fl Ignition lock

fDRadio or MMI display

I/4\ ] Emergency flashers

(ffi PASSENGER AIR BAGOFF

indicator light

Radio system or Audi multimedia

Drive select

Start-Stop-System or

Hybrid drive (EVmode )

Parking system

Electronic Stabilization Control (ESC)

(

j Hill descent assist

On vehicles equipped with a radio system,

buttons eare locate d on the shift gat e.

E) Climate control system

Sh ift lever for automat ic transmission

e Ashtray with cigarette lighter

G, Coin storage

MMI control console

STARTENGINE STOP button

e Electromechanical parking brake

G) Steering wheel position adjuster

& WARNING

The column should only be adjusted when

the vehicle is at a complete standstill.

https://www.automotive-manuals.net/

MMI Functions

Driver assistance systems

Use the button

to adjus t or operate

many driver assistance systems in your

Audi.

For deta iled information on this, please see

your vehicle Owner's Manua l.

Pairing Cell Phone to Bluetooth System

Depending on your cell phone you can pa ir your phone using Secure Simple Pairing or

standard pairing .

Secure Simple Pairing (SSP)

• Vehicle must be stationary with ignition on . Bluetooth system will be visible for 5 min utes.

• Press the ~ button on the MMI.

• Select the Search for new cell phone menu item an d confirm.

• Select your Bluetooth cell phone in the display an d confirm.

• Select the Handsfree menu item and confirm your se lect ion.

• Select Yes to confirm the 6 digit PIN ma tching the cell phone display.

• Select PAIRon the phone to comple t e pairing .

Standard pairing

• Follow steps 1-5 from above .

• Select Yes to confirm the 4-digit PIN.

• Enter the same 4-digit PIN into your cell phone .

• Select PAIRon the phone to comple te pairi ng.

Various phones requi red tha t a confi rmation be accepte d for automa t ic future connect ions

between t he phone and MMI system as well as acknowledging the synchroniza ti on of the

address book between the phone and MMI.

https://www.automotive-manuals.net/

Advanced key

Opening and closing the vehicle

With the advanced key,you can lock and

unlock your vehicle without using the remote

control key.Youonly need to carry the remote

control keywith you.

Unlocking the vehicle: Grasp one of the door

handles or the handle recess on the luggage

compartment lid.

Locking the vehicle: Place the selector lever

in the P position. Touch the sensor Oon one

of the door handles.

Closing the luggage com[ artrent lid

automatically: Press the

button in

the open luggage compartment lid.

/!:;,.WARNING

When you lock your vehicle from the outside, do

not leave anyone -especially children -inside the

vehicle. Remember, when you lock the vehicle

from the outside the windows cannot be opened

from the inside.

/!:;,.WARNING

Always ensure that no one is within range of the

rearlid when it is moving, in particular close to

the hinges -fingers or hands can be pinched.

/!:;,.WARNING

When you leave the vehicle, always remove

the ignition key and take it with you. Thiswill

prevent passengers (children, for example) from

accidentally being locked in the vehicle should

they accidentally press the power locking switch

in the front doors.

Starting the engine

Switching the ignition on and off:

Insert the key into the ignition lock.

Donot depress the brake pedal.

Press on the key.

The keycan only be removed when

the ignition is switched off. ___

Starting the engine: Insert

the key into the ignition lock. 1

Depress the brake pedal

and move the selector

lever into Por N.

...

c....,

Brieflypress on the key. --...._.._ ,...........___

Stopping the engine when the vehicle

is standing: Movethe selector lever into

P or N. Briefly press on the key.

Advanced key: Youcan switch on the

ignition and start/stop the engine using the

STARTENGINESTOPbutton without having

the key inserted in the ignition lock.

Introduction

https://www.automotive-manuals.net/

Automatic transmission

Selector lever positions

P Park

R Reverse

N Neutral (Idle)

D/S Drive/Sport

Releasing the selector lever lock

and engaging a gear: Switch the

ignition on, press the brake pedal

and press the lock button on the

selector lever. Place the selector

lever in the D/S posit ion to drive

forward. When switching from Dto Sor from S to D,

you must move the selector lever back.

tiptronic: To shift manually, move the selector

lever to the right out of the D/S position.

The driver information system displays the gears.

Shifting up/ down:

Press the selector lever forward/back.

Sta rt-Stop-System

Engine stop

0 Brake the vehicle until

it comes to a complete

stop ...

If you do not want to use

the i ,i; m, you can press

the · • button to switch

it off .

8 Continue pressing the

brake pedal until the

engine automatically

stops ...

0 the. indicator light

turns on.

Engine start

0 Before you continue driving,

remove your foot from the

brake pedal and the engine

will start automatically ...

e the indicator

light turns off.

https://www.automotive-manuals.net/

Fuel filler door

Opening: Press the left side

of the fuel filler door.

Closing: Press the fuel

filler door in until it latches.

Fuel filler door

(Gasoline engine )

flFuel recommendation

Unleaded premium

Gasoline grade gaso line only

(minimum 91 AKI,95 RON)

Diesel ULSD-Diesel No. 2 only

Fuel filler door (Diesel engine)

Filler openings:

Engine oil specifications

If you must add oil, only use oil that

conforms to Audi oil stan dards .

0 Diesel

0 AdBlue (see chapter

"Selective catalytic reductio n") Gasoline eng ine VW502 00 only

Diesel engine VW507 00 only

Refer to the "Checking and filling"

chapter for more information.

Tire pressures

The label with the correct tire pressures

is located on the driver's door pillar.

Tire pressure monitoring system

The TPMSmust be reset via radio or MMI if the

tire pressure is adjusted or wheels are change d.

Technology

https://www.automotive-manuals.net/

Hybrid

The hybrid drive automati cally combines the driving power of an internal

combustion engine and an electr ic motor for fuel efficient driving.

Power meter

0 Vehicle is not ready to be driven

8 Braking with recuperation (Energy recovery)

8 Recuperation (e.g. while coastin g or driving downhill)

0 High voltage battery charge level

0 READYand hybrid ready: After sta rting the vehicle, the need le

points to READYand hybrid ready appears for a short time in the

display. The vehicle is now ready to drive and can be done so

without any engine noise .

0 Fuel efficient driving with the combustion engine or electric engine

0 System limits for electric driving in the EV mode

0 Fuel efficient driving while the combustion engine is in the partial

power range

0 Driving while the combustion engine isin the full power range

100% combustion engine

4) BOOST: The electric motor works together with the combustion

engine to deliver maximum acceleration.

e EV mode active

EV mode

When the system perm its, the vehicle is always driven

electrically in the EVmode . While in Dor R, you can drive

slowly (for exam ple when driving in a parking stru cture or

reside ntial area) without using the combustion engine.

Activating/ deactivating :

Press the ~ button in the center conso le.

Symbol in the instrument cluster:

c:5V EVmode active

c:5V EVmode deactivated bythe system

https://www.automotive-manuals.net/

Hybrid funct ions Tips fo r fuel efficient driving

Driving with the combustion engine: The vehicle is driven using Starting from a stop: Shift into D, remove your foot from the brake

only the combustion engine; the high voltage battery is charged as pedal and slowly press down on the accelerato r peda l.

needed . Constant driving and gliding (gliding): Accelerate spar ingly,

Maximum acceleration (Boost): The vehicle is driven with both the and completely remove your foot from the accelerator pedal as

combustion engine and the electric motor. This uses a large amount soon as poss ible.

of energy. Energy recovery (Recuperation): Brake ear ly and steadily with short

Electric driving : The vehicle is driven solely with electr icity pedal movements . Let the vehicle coast to a stop.

depending on the high voltage battery charge level and the

amount of driving resistance. The combust ion eng ine is turned off. City driving : Accelerate spar ingly, and brake earlyand steadily with

short pedal movements. Usethe ~ button spar ingly.

EV mode: Enhanced electric driving. Driving on highways and expressways: Remove your foot from

Gliding : When in Dand with your foot off the accelerator pedal, the accelerator pedal to increase the amount of time that you

the combust ion eng ine remains turned off up to approximately are coasting. Reduce speed by removing your foot from the

100 mph (160 km/h) . accelerator pedal instead of braking. Avoid driving at speeds

Energy recovery (Recuperation): Generates energy using the

electr ic motor while simultaneously charg ing the high voltage above approx imately 100 mph (160 km/h) . Use the S selector

lever posit ion and tiptron ic mode sparingly .

battery by braking, coasting and/or driving downh ill.

The combust ion engine is turned off.

Automatic start for the combustion engine: Occurs, for example,

at high vehicle speeds, if the high voltage batte ry charge level is

too low, if the A/Csystem requires a high amount of power, if the

engine temperature is too low or if more braking power is needed.

I Technology

https://www.automotive-manuals.net/

Multi Media Interface/

Radio system

Components

0 Driver informat ion system

0 Multifunction steering wheel

Roll the left thumbwheel to select a

menu item. Press the thumbwheel to

confirm the selec tion.

Press the

button to switch

between the active radio source,

navigation system and telephone.

Press the

button briefly to

activate the voice recognition system .

After the <Beep>, you can say the

des ired commands.

To deactivate, press and hold the

button unt il you hear the

message <Cancel>.

Press the [ii] button to repeat the

last navigat ion announcement.

Roll the right thumbwheel

to adjust the volume. Press the

thumbwhee l to mute the MMI.

8 Radio system/ MM! display

0 On/ Off button

Switching on/ off:

Press briefly/press and hold .

Adjusting the volume : Turn .

Mute : Press briefly.

Select previous/ next radio stat ion, track:

Press right/left briefly (MMI only).

Fast forward / rewind:

Press and hold right/left (MMI only).

https://www.automotive-manuals.net/

,& WARNING

Distraction causes accidents:

-Never enter datawhile driving!

-Obey t raffic laws & road signs!

-Refer to the Owner's Manual!

0 Buttons for direct access to the menus

Call up main funct ions such as ~ -

C, Control knob

To select a menu item: Turn the knob .

To confirm your selection: Press the knob .

G Control buttons

Activate the functions currently shown in

the corners of the MMI display .

8 Button ~ or ~

Cancel the selection/go back to the function above .

f) Joystick

To move the crosshairs in a map view (nav igat ion)

or to control the DVDmenu .

Operating concept

All functions are controlled

using the same operating

concept .

0 Selecting: Turn the knob.

8 Confirming: Press the knob.

8 Calling up menus in the

display corners: Press the

appropr iate button.

https://www.automotive-manuals.net/

Placing a phone call

Dialing a phone number from a call list:

• Press the ~ button .

• Turn the control knob to select Dialed

numbers, Missed calls or Receivedcalls

and press to confirm. The phone numbers

from the selected list appear in the MMI

display .

• Turn the control knob to select the

desired number and press to confirm

or press the Dial control butt on.

Accessingdirectory contacts:

• Press the ~ button.

• Turn the control knob to select

Directory and press to confirm.

• Turn the control knob to select the

desired contact and press to confirm .

• Turn the control knob to select the

desired number and press to confirm

or press the Call contro l button .

Setting the clock

Select in the MMI:

button>

Time control button > Time source >

manual or GPS.

Manual: All menu items displayed are set

manually.

GPS:Time and date are set by GPS depend -

ing on the manually selected Time zone.

Therefore, when traveling into another

time zone you must manually update

the time zone in order for the time clock

to update to t he correct time.

https://www.automotive-manuals.net/

Voice recognition system

Youcan operate many MMI functions comfortably using voice commands .

Requirement: Switch the ignition and MIMI on, do not use th e A/Csystem,

do not have any phone calls in progress, deactivate the parking system.

Switching the system on: Press the ~ button on the multifunction steering whee l briefly.

Sayyour comman d (refer to the examples) after the <Beep>.

The system gives visual and audio confirmation of your input .

Switching the system off: Press and hold the ~ button or say <Cancel>.

Improve recognition function : Select the ~ button >Setup MMI control button >Voice recognition > Individual Speech Training .

Sample commands

Accessinga directory contact: Say <Call (XY)>,for example, <Call "Max Mustermann">.

Displaying call lists: Say <Telephone> and then <Received calls>, <Dialed numbers> or <Missed calls>.

Direct "One shot" destination entry: Say <Enter address> and then say the House Number, Stree t, Cityand State when prompted .

by the system. Then say <Start route guidance>.

Point of interest search: Say <Navigation>, <Enter point of interest> and then the des ired search area, such as <In immed iate vicinity>,

<In vicinity of destination> or <Alongthe route>. Saythe name or line number for the desired entry.

Direct point of interest selection: Say <Navigation> and the n <Next gas station>, <Next parking lot>, <Next hotel>, <Next restaurant>,

<Next airport>, <Next train station>, <Next hospital>, for examp le.

Accessingvoice command help: Say <Help>, <Help Telephone>, <Help Navigation>, <Help Media>, etc .

Infotainment

https://www.automotive-manuals.net/

·-

....,

·-

Cl O Press the ~ button.

C e Press the Destination control button.

·-

....,

I..

....,

l/l

8 Turn the control knob to select the

first letter of the destination.

0 Press the control knob to confirm. Enter

the remaining letters of the destination

using the same procedure until the

desired location name is displayed.

Infotainment

E) Turn/press the control knob to

select/confirm the Address menu.

0 Press/hold the control knob longer

when the city appears in the list.

0 Turn/press to select the city and enter

detailed destination information

if necessary.

------

0 Turn/press the control knob to

select/confirm the City/Zip code

menu item .

E) Select the menu item

Start route guidance.

fl) Press the control knob to confirm.

The route is calculated.

https://www.automotive-manuals.net/

For additional information on indicator lights, refer to your vehicle Owner's Manual.

Electromechan ical

steering, Dynamic steer ing

EElectron ic power contro l

l!!!t!!!IGlowplug system

IW.I(Diese l only)

Electronic Stabilization

a.I Control (ESC)

- Electron ic Stabilizat ion

- Control (ESC)

• Safety systems (USA)

mSafety systems (CAN)

Tire pressure

monitoring system

Turn signals/Emergency

flashe r

Trailer turn signal

assembly

Safety belt

l'.:!IMalfunction

- Indicato r Lamp

Open road

(Adaptive cruise contro l)

Driving in traffic

(Adaptive cruise control)

Request for driver

to assume control

(Adaptive ,cruise control)

High beam

Cruise control activated

(USA)

•

Cruise contro l activated

(CAN)

Anti-lock brake system

(USA)

Anti-lock brake system

(CAN)

Parking brake (USA)

Parking brake (CAN)

Brake malfunction (USA)

Brake malfunction (CAN)

Alternator failure

Electromechan ical

steering

Cooling system

malfunction

Engine oil pressure

too low

Audi is constantly improving the ir products. Modifications in form, equipment, and technology are possible. No legal comm itment is implied by th e information, ill ustrat ions,

and descript ions in this Quick Reference Guide. Reprinting, reproduct ion or trans lation, in whole or in part, is not perm itted withou t writte n permission from Audi of America, Inc.