Audio Technica ATH-M50xSTS-USB User manual

ATH-M50xSTS-USB
Streaming Headset
User Manual
English

1
Safety precautions
Follow applicable laws regarding mobile phone and headphone use if using headphones while driving.
Do not use the product in places where the inability to hear ambient sound presents a serious risk (such as at railroad
crossings, train stations, and construction sites).
To prevent damage to your hearing, do not raise the volume too high.
Listening to loud sound for an extended period may cause temporary or permanent hearing loss.
Discontinue use if skin irritation results from direct contact with the product.
Do not disassemble, modify or attempt to repair the product.
Be careful to avoid pinching yourself between the housing and the arm of product.

2
Notes on use
Be sure to read the connected device’s user manual before use.
Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur
while using the product.
On public transportation or in other public places, keep the volume low so as not to disturb other people.
Minimize the volume on your device before connecting the product.
When using the product in a dry environment, you may feel a tingling sensation in your ears. This is caused by static
electricity accumulated on your body, not by product malfunction.
Do not subject the product to strong impact.
Do not store the product in direct sunlight, near heating devices, or in hot, humid, or dusty places. Additionally, do
not allow the product to get wet.
When the product is used for a long time, the product may become discolored due to ultraviolet light (especially
direct sunlight) and wear.
Do not expose the product to excessive stress or pressure , which could result in damage or deformation.
Make sure to connect/disconnect the included cable by holding the plug. Pulling directly on the included cable can
result in a broken wire and the risk of electric shock.
Do not wrap the cable around a rack, furniture or other object. Do not allow the cable to be pinched.

3
Part names and functions
Headset
4
5
7
10
6
2
1
3
9
8
1
L/R (left/right) indicator
2
Earpad
3
Headband
4
Slider
5
Joint
6
Arm
7
Housing
8
Monitor dial
9
Microphone
10
USB plug (USB Type-A)

Part names and functions
4
Accessories
21
1
USB conversion adapter (USB Type-A to USB Type-C™)
2
Earpads
At the time of purchase, the earpads that are made of mesh material with excellent air permeability for increased
comfort are attached to the headset.
Earpads
There are two types of earpads for this product. Use the product for whichever of these purposes suits your needs.
Earpad type Description
Mesh earpads
These earpads are made of mesh material with excellent air permeability
for increased comfort. At the time of purchase, these earpads are attached
to the headset.
Leather earpads These are the same earpads used on the ATH-M50x. They are made of
leather material and stress audio quality and sound isolation.

5
Wearing the product
Put the side of the product marked “L” (LEFT) onto the left ear and the side marked “R” (RIGHT) onto the right ear, slide
the slider up and down so that the earpads cover the ears, and then adjust the headband.
Swivel mechanism
You can fold the housing so that it lies flat.
The swivel mechanism cannot rotate more than 90 degrees. Do not apply excessive force.
1
1
Joint
Compact folding
You can fold the housing into the inner side of the headband using the joints at the fulcrum.
Be careful so as not to get your fingers caught in the joints.
When using the product, make sure to return the housings to their original positions.

Wearing the product
6
1
1
Joint

7
Using the product
1Lower the volume on the computer you intend to use, then connect the cable to the USB port on the
computer.
When connecting to a USB Type-C port, use the included USB conversion adapter (USB Type-A to USB Type-
C).
The computer will automatically recognize the product and install the driver.
2Place the product with the side marked “L” on your left ear and the side marked “R” on your right
ear, and adjust the headband length by sliding the slider.
3Adjust the microphone near the corner of your mouth.
4Operate the computer to adjust volume as necessary.
Read the user manual for the computer.

Using the product
8
Computer settings
Windows 11 / Windows 10
1Open the Start Menu and click “Settings”.
2Click “System”.
3Click “Sound”.
4In “Output” and “Input”, confirm that “ATH-M50xSTS-USB” is selected.
If the product is not selected, select the product.
Depending on the app or software being used, it may be necessary to switch the output and input for that
app or software to this product.
macOS
1Click the Apple icon and select “System Preferences”.
2Click “Sound”.
3In “Output” and “Input”, confirm that “ATH-M50xSTS-USB” is selected.
If the product is not selected, select the product.
Depending on the app or software being used, it may be necessary to switch the output and input for that
app or software to this product.
Muting the microphone
1Moving the microphone up mutes the microphone.
To unmute, move the microphone down.

Using the product
9
Monitoring your voice
1You can check the sound of your voice during use by pressing the monitor dial.
Each time the monitor dial is pressed, it switches between ON and OFF.
Tilt the monitor dial to the left or right to adjust the volume of your voice.

10
Cleaning
Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint
thinners, or other solvents for cleaning purposes.
Use a dry cloth to clean the headphones and the in-line controller.
Wipe away any perspiration or dirt from the cable with a dry cloth immediately after use. Failure to clean the cable
may cause it to deteriorate and harden over time, resulting in malfunction.
Wipe the cable plug with a dry cloth if dirty. Failure to clean the plug may cause sound skipping or noise.
To clean the earpads and headband, wipe with a dry cloth. Earpads and headband may fade if sweat or water dries
on them. If the earpads and headband get wet, we recommend wiping them with a dry cloth and allowing them to
dry in the shade.
If the product will not be used for an extended period of time, store it in a well-ventilated place free from
high temperatures and humidity.
Earpads are consumable parts. The earpads deteriorate over time due to use or storage. Contact your local
Audio-Technica dealer for earpad replacement or other repairs.

11
Specifications
Headphones
Type Closed-back dynamic
Driver 45 mm
Sensitivity 99 dB/mW
Frequency response 15 to 28,000 Hz
Maximum input power 1,600 mW
Impedance 38 ohms
Microphone
Type Back electret condenser
Polar pattern Unidirectional
Frequency response 50 to 20,000 Hz (at 3 cm)
Communication specifications
System operation USB 2.0 compliant
Supported OS Windows 10, Windows 11
macOS Catalina, macOS Big Sur, macOS Monterey
Supported sample rates 44.1 kHz/48 kHz/88.2 kHz/96 kHz
Supported bit depth 16-bit/24-bit
Other
Weight (without cable) Approx. 330 g (12 oz)
Power supply USB power (5 V DC)
Cable length 2.0 m (6.6')
Plug USB Type-A
Accessories Earpads, USB conversion adapter (USB Type-A to USB Type-C)
Sold separately Earpads, USB conversion adapter (USB Type-A to USB Type-C)
For product improvement, the product is subject to modification without notice.

12
Trademarks
USB Type-C™is a trademark of USB Implementers Forum.
Microsoft®and Windows®are registered trademarks of Microsoft Corporation in the United States and/or other
countries.
Microsoft Windows operating system is indicated in its abbreviated form as Windows.
Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries and regions.

株式会社オーディオテクニカ
〒194-8666 東京都町田市西成瀬2-46-1
www.audio-technica.co.jp
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
www.audio-technica.com
©2023 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com 382908160-02-01 ver.1 2023.02.15