Audio Technica ATW-DA600 Operating manual

Important Information
For Model ATW-DA600
“Non-polarity-inverting DC Cables” now provided
for use with 1400 Series and 3000 Series Wireless
The ATW-DA600 now includes four ATW-RDCN Non-polarity-inverting
DC Cables, for use only with ATW-R14 and ATW-R310 receivers or other
receivers that require 12-volt DC
center-pin-positive power.
ATW-RDCP Polarity-inverting DC Cables are no longer included.
Owners of ATW-DA600 Antenna Distribution Systems needing the original
ATW-RDCP cables, for use with the 7000 Series’ ATW-R73x receiver or
other receivers requiring
center-pin-negative power, should contact the
Audio-Technica service department. A set of four ATW-RDCP cables will
be sent promptly, without charge.
Please keep this notice with the ATW-DA600 Installation and Operation Manual.
ATW-DA600 owners outside the U.S. and Canada: Please contact your local
Audio-Technica distributor for availability of ATW-RDCP cables.
Audio-Technica U.S., Inc.
1221 Commerce Drive, Stow, OH 44224
Tel: [phone] Service Fax: [phone]
Service E-mail: [email protected]
P51606 Effective April, 2003 ©2003 Audio-Technica U.S., Inc. Printed in U.S.A.