Audiolab 6000N Play User manual

6000N Play
User Manual

1: Important safety instruction
IMPORTANT SAFETY INSTRUCTION
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
WARNING: SHOCK HAZARD-DO NOT OPEN
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of non-insulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
Warning: To reduce the risk of electric shock, do not remove
cover (or back) as there are no user-serviceable parts inside.
Refer servicing to qualified personnel.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance instructions in the literature
accompanying the appliance.
Do not install this equipment in a confined or building-in
space such as a book case or similar unit, and remain a well
ventilation conditions at open site. The ventilation should
not be impeded by covering the ventilation openings with
items such as newspaper, table-cloths, curtains etc.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two blades
and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at the plugs, convenience receptacles, and at
the point where they exit from the apparatus.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart or rack
is used, use caution when moving the
cart/apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
CAUTION: These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are
qualified to do so.
Do not install this equipment in a confined or built-in space
such as a bookcase or similar unit, and keep well ventilated
in open space. The ventilation should not be impeded by
covering the ventilation openings with items such as
newspaper, table-cloths, curtains etc.
WARNING: Only use attachments/accessories specified
orprovided by the manufacturer (such as the exclusive
supply adapter, battery etc).
WARNING: Please refer to the information on the exterior
panel of the enclosure for electrical and safety information
before installing or operating the apparatus.
WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. The apparatus
shall not be exposed to dripping or splashing and that
objects filled with liquids, such as vases, shall not be placed
on apparatus.
WARNING: The mains plug/appliance coupler is used as
disconnect device, the disconnect device shall remain readily
operable.
WARNING: For the terminals marked with symbol of “ ”
the voltage may be of sufficient magnitude to constitute a
risk of electric shock. The external wiring connected to the
terminals requires installation by a qualified person or the
use of ready-made leads or cords.
Protective earthing terminal. The apparatus should
be connected to a mains socket outlet with a
protective earthing connection.
The product is designed to use in moderate/tropical
climates.
Mains Supply: The mains operating voltage of Audiolab
6000 series units is shown on the rear panel. If this voltage
does not match the mains voltage in your area, consult your
Audiolab dealer about converting the unit.
The mains supply fuse on the rear panel is accessible when
the IEC mains plug has been removed. In the rare event that
it has broken, check for any obvious cause before replacing
the fuse with one of the correct rating and type.
The fuse values are:
220 – 240V (UK, China, etc.) T630mAL 250V Slow Blow
100 – 120V (USA, Japan, etc.) T1AL 250V Slow Blow

2: Contents
audiolab
6000N Play
GETTING STARTED ………………………………………………………………………………………………………………………………………………………………………………… 4
DTS PLAY-FI® WIRELESS STREAMING TECHNOLOGY ……………………………………………………………………………………………………………………………… 8
DOWNLOAD THE APP ……………………………………………………………………………………………………………………………………………………………….……………. 9
WI-FI CONNECTION USING THE APP ……………………………………………………………………………………………………………………………………………………… 10
WI-FI CONNECTION SETUP USING A WINDOWS PC OR MAC .…………..............………………………………………………………………………………………… 11
APP OPERATIONS ………...........................………………………………………………………………………………………………………………………………….……..….…… 12
CONTROLS AND FUNCTIONS ………...........................…………………………………………………………………………………………………………………………………. 5
CONNECTION ……………………………………………………………………………………………………………………………………………............………………….…………..... 7
WARRANTY ……………………………………………………………………………………………………………………………………………………………………….…………........... 16
SPECIFICATIONS………………………………………………………………………………………………………………………………………………………………….…………...........17

Page 4
3: Getting started
Introduction
Welcome to Audiolab 6000N Play - a wireless audio streaming player which is the latest
member of the acclaimed Audiolab 6000 series of components. Featuring DTS Play-Fi
Technology, music can be streamed over your wireless network in high resolution format and
can be easily expanded to a multi-room system if required. You can stream from any source
on your wireless network, including smart-phones, tablets or PCs as well as a NAS Drive.
However you want to stream your music, Audiolab's 6000N will deliver an outstanding
performance.
Unpacking the equipment
The carton contains:
· The Audiolab 6000N Play
· One IEC mains cable with a plug suitable for your area
· One USB B data cable
· One Audiolab 6000N Play user manual
Consult the dealer from whom you purchased the equipment if any item is not present.
Carefully unpack the unit and accessories. Take care not to damage the surface finish when
undoing the protective polythene sleeve. Retain the packing materials for future use. Retain
the user manual and information concerning the date and place of purchase of your
equipment for future reference. If you transfer the unit to a third party please pass on this
instruction manual along with the equipment.
Placement
The unit must be mounted on a solid, level and stable surface.
Before you connect the Audiolab 6000N Play the to AC mains power, ensure your AC mains
voltage corresponds to the rating on the rear panel of the product. If in doubt, consult your
dealer. If you move to an area which has a different mains voltage, seek advice from an
Audiolab appointed dealer or a competent service technician.

4: Controls and functions - 1 Page 5
1.Indicators
Device States
Standby Mode
Initialization Mode
Standard Setting Mode
WPS Mode
Network Connecting
WiFi Network Connection
Wired Network Connection
LED States
LED is dark red
LED fast-flash white
LED slow-breathe white
LED double-flash white
LED slow-flash white
LED is bright white
LED is bright red
2.The PRESET Button
Store/Play Internet Radio Stations - up to 6 Stations can be stored.
To store a station, press and hold a Preset button for 3 seconds. The LED
will double-flash once to show it is stored. If it fails to store the LED will
double-flash three times.
To Play a Station, press a Preset button briefly. The LED will double-flash
once.
Failure to play a station will be signaled by the LED double-flashing 3
times.
Combination key function：
Factory Reset
Press and hold Preset button “1” and “4” for 8 seconds, the red LED will
flash twice with a tone, then the device will restart automatically.
Analogue Output Level Setting
Press and hold Preset button "2" and "5" for 3 seconds, the analogue
output level can be switched between fixed and variable.
When set to fixed mode, the red LED on the front panel will flash thrice,
the analogue output level will be fixed to the maximum output.
When set to variable mode, the red LED on the front panel will flash twice,
then the analogue output level can be adjusted by APP. The default setting
on 6000N Play is variable mode.
4 5 6 7 8 9 10 11 12 13 14 15
1 2 3

4: Controls and functions - 2 Page 6
8.Wi-Fi LED State Indicator
Device States
Initialization Mode
Standard Setting Mode
WPS Mode
Network Connecting
Wi-Fi Network Connection
Wired Network Connection
LED States
Fast-flash
Slow-breathe
Double-flash
Slow-flash
Brightly lit
Off
3.Standby Button
When in Standby mode, the power LED will glow in dark red. There are various standby mode
options available. You can activate these options by holding the Standby button for 4 seconds and
then;
- ‘Never in auto-standby' mode: short press the Standby button when it flashes once. By default,
- ‘Auto-standby after 20 minutes': short press the Standby button when it flashes twice.
- ‘Auto-standby after 1 hour': short press the Standby button when it flashes thrice.
4.Fuse
The fuse specification:
220~240V (UK, China, etc.) T630mAL 250V Slow Blow
100~120V (America, Japan, etc.) T1AL 250V Slow Blow
5.AC Mains Socket
You can select between AC mains voltages 115V or 230V using the switch on the underside of the
case. Before connecting the unit to AC mains power, please check that the voltage switch is set to
match to your AC mains voltage.
6.AC Power Switch
Before connecting the AC power cord to the 6000N, please make sure the Power Switch is in the Off
position. Switch it to the ON position after connecting the unit to the AC mains.
7.Wi-Fi Antenna
DTS Play-Fi is compatible with any router which is authenticated to Wi-Fi standards. We recommend
the use of 802.11n or better which enables 2.4GHz and 5 GHz transmission frequencies. If you have
the option, 5GHz connection will give the most stable performance.
9.Wi-Fi Setting Button
Press and hold the Wi-Fi Setting Button for 4 seconds to enter WPS mode. Press and hold for 8
seconds to enter the Standard setup mode.
10.Ethernet Port
Use a suitable cable to plug the Ethernet Port to the LAN port of a wireless router for wired
connection.
11.Update Interface
This USB interface is only to be used for upgrading the internal firmware. It cannot be used for USB
media sources.
Upgrade method: Put the Audiolab upgrade file on a USB memory stick and insert into the Update
Interface. Hold down the Standby Button on the front panel, turn on the power switch then release
the button. The red LED on the front panel will flash as the upgrade takes place. After the upgrade
completes, a 'relay' sound will be heard and the red LED glows steady and dimly. You can then
unplug the USB stick and operate the 6000N.
12.USB Control Interface
If you are using 6000N with the Audiolab 6000A amplifier, connect this USB Control Interface to the
6000A 'Update' Interface with a USB B data cable. You can then use the Play-Fi APP to control the
listening volume.
Please note: the USB Control Interface cannot be used to link to a PC or output digital music data.
13.12V TRIG Interfaces
Two standard 12V trigger interfaces are provided to allow the 6000N to be switched off and on
remotely. Connect the 12V trigger source equipment to the 'IN' interface. The 'LINK' interface can
be used as an output to daisy-chain the 12V trigger.
14.Digital Signal Output Interface
Two Digital Signal outputs are provided - one COAX and one OPT (Optical). The maximum output
resolution of the PCM digital signal is 24 bit/192kHz.
15.Analogue Signal Output Interface
Use this stereo output to connect to an amplifier or other device that accepts an analogue input
using a shielded RCA cable.
6000N Play is set in this mode.

5.Connection Page 7
1. For Audiolab 6000N the COAX and OPT outputs transfer the PCM digital signal at up to 24 bit/192kHz resolution.
2. Using the DTS Play-Fi APP the volume of the analogue output can be controlled. When using the 6000N with the Audiolab 6000A amplifier, connect the USB
Control Interface to the 6000A Update input to synchronise the volume of the 6000A using the APP.
Note:

Page 8
6: DTS PLAY-FI® wireless streaming technology
Key Features
DTS Play-Fi puts you in complete control of your music. It gives you the freedom to effortlessly
stream via Wi-Fi ® from any device to any speaker in any room in your house. It’s never been
easier to listen to music with the people you love, in the place you love most. A place where
memories are made and music plays the starring role.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing
Limited. DTS, Play-Fi, the Symbol, and Play-Fi together in combination with the Symbol are
trademarks of DTS, Inc. DTS and Play-Fi are registered trademarks of DTS, Inc. © DTS, Inc. All
Rights Reserved.
WI-FI®TECHNOLOGY
DTS Play-Fi streams music over standard Wi-Fi
networks, delivering perfectly synchronized audio,
with no lag and zero loss in sound quality.
MULTI-ROOM
Enjoy music in every room of your house — all at
once, perfectly synchronized, with no lag.
You’re in control.
ANY OPERATING SYSTEM
Fully compatible with all operating systems:
Apple iOS, Android™, Windows® PC, and Fire OS.
MULTI-SPEAKER
DTS Play-Fi is open to all speakers, no matter
the size, shape, or brand. It’s a truly all-inclusive
system.
EASY SETUP
No logins, no complicated computer-based setups.
Just download the app and within minutes, you’re
ready to listen.
DTS PLAY-FI APP
Simply download the free app and immediately
send songs via Wi-Fi to any speaker in any room
of the house.

7.Download the APP Page 9
Download the DTS Play-Fi APP
The DTS Play-Fi APP can be downloaded from the Google Play Store, Amazon APP Market or
Apple App Store. For Windows PC you can download the Play-Fi Windows APP from the official
website: https://play-fi.com
Network settings
Wired network setting
Connect the Ethernet Port to the LAN port of a wireless router using a suitable cable. After
switching on the 6000N, the red LED indicators on the front and rear panels will flash during
the connection phase. If the connection is successful, the LED on the rear panel will go off and
the front panel LED will be brightly lit.
Wireless Network Setting
You can connect to a wireless network using one of two modes: WPS Mode or Standard Mode.
WPS Mode:
In order to make the 6000N enter WPS Mode, switch the unit on and press and hold the Wi-FI
SETUP button on the rear panel for 4 seconds. The Wi-Fi LED will double-flash with a tone
indicating that WPS Mode is active. Then press the WPS key on your wireless router and the
unit should connect to your wireless network automatically. This connection phase may take
up to 60 seconds. If the connection fails, please try again.
Standard Mode:
After switching the 6000N on, press and hold the Wi-Fi SETUP button on the rear panel for 8
seconds. For the first 4 seconds the LED will double-flash with a tone - keep holding the button
down and after 8 seconds the Wi-Fi LED will flash quickly with the same tone. The Standard
connection mode is now active.
When the Standard connection Wi-Fi hotspot is active the Wi-Fi LED will flash-breathe with a
slow fluctuation between off and on (reflected by the white LED on the front panel). You can
now use your Android or IOS device to enter the Wi-Fi password using the DTS Play-Fi APP as
follows (see next page):

8.Wi-Fi connection using the APP Page 10
For Andriod users:
(1) Open the DTS Play-Fi APP, then click the 'Set-up your Play-Fi device' button.
(2) When it has found the 6000N click the 'Set-Up' button. Next input the Wi-Fi password for
your wireless network. Then click the 'Next' button.
(3) During installation the APP will find and upgrade the 6000N Play-Fi settings which may take
a few minutes.
(4) After completing the network setup and upgrading you can set a name for your 6000N
Device and use it.
For Apple iOS users:
(1) Download the Play-Fi APP. Before opening the APP please switch to the Settings - Wi-Fi
menu on your smartphone or tablet and select 'PlayFiXDeviceXXXXXX' from the options.
(2) Open the Play-Fi APP and find the 6000N PlayFi Device name. Select it and enter your
wireless network password.
(3) During installation the APP will find and upgrade the 6000N Play-Fi settings which may take
a few minutes.
(4) After completing the network setup and upgrading you can set a name for the 6000N
Device and use it.

9.Wi-Fi connection setup using a Windows PC or Mac Page 11
For PC or Mac users:
If you cannot connect using the DTS Play-Fi APP, or you need to do some high-level option such
as setting the static IP configuration, you can setup the Audiolab 6000N Play using a web
browser from your Windows PC or a Mac.
Set the 6000N to Standard Setup mode, then follow these steps:
(1) Connect your computer to the wireless Wi-Fi of the 6000N - it will show as
'PlayFiXDeviceXXXXXX' or similar name. After connecting your computer may show 'No
Internet Connection' - this is normal.
(2) Open your Internet Browser and type: 192.168.0.1/index.html in the address bar.
(3) Click the Enter key or click 'Continue' option in your Internet Browser.
(4) This will open the Play-Fi configuration.
(5) Select the 'Set Up' button.
(6) Select your wireless router Wi-Fi network.
(7) Enter the password for your wireless network. Then click the 'NEXT' button.
(8) You can then name your 6000N Device and click 'NEXT'. The Wi-Fi connection will be made
and you can use the device.

10.APP operations - 1 Page 12
Device Selection
The DTS Play-Fi APP allows you to control and direct streaming music to a variety of Devices
throughout your home that use the DTS Play-Fi system. You can set each Device to have a
unique name. You can also group Devices into an Area, where each Device will play the same
music.
To select a Device and Area using the APP, click the '+' icon on the upper right corner of the APP
display. Select an Area to add, then select a Device on which to play the music. If you wish to
play high-resolution audio files, the icon 'Hi-Res AUDIO' should be selected.
Music Services
DTS Play-Fi supports the world’s most popular and exciting streaming music services, so you
can enjoy your favorites at home just as easily as you do in the gym. See below for more
information of streaming music service platforms. Please feel free to choose one you like.
(Note: some streaming music service platforms probably need to be registered.)
Amazon Music
Amazon Prime members can use Amazon's popular music service for
free. A growing selection of over 2 million songs is always ad-free and
on-demand, with curated playlists, personalized stations and unlimited
skips. Upgrade to Prime Music Unlimited, and enjoy 10 million songs,
weekly new releases, and more.
Deezer
With 43 million tracks, 100 million playlists, and a presence in 182
countries, Deezer literally covers the globe for its subscribers.
Subscriptions start at $9.99/month, and include ad-free playback,
premium audio quality, and more.
iHeartRadio
iHeartRadio combines access to over 1,500 of the most popular live
terrestrial and internet radio stations with unique live events and
compelling custom features, like artist radio, personalized radio, and
on-demand podcasts for FREE. Their new Plus and All-Access
subscriptions allow you to pause, rewind, skip and save live radio
content, stream on-demand music, and more.
Internet Radio
DTS Play-Fi has a built-in Internet Radio service that gives you access to
thousands of radio stations and podcasts from around the globe.
Instantly see your local favorites, or tune into the BBC, ESPN, Radio
Disney, the Wall Street Journal, and more. Browsing is a snap, and if you
find a station you love, just give it a star and it’ll be ready to stream
whenever you are. Free, no subscription required.
Juke
With more than 20 million tracks and a dedicated base of music fans,
Juke’s streaming service includes popular features like on-the-go
playlists, new music discovery, and ad-free listening. DTS Play-Fi is the
only multi-room audio platform to offer the Juke service.
KKBox
KKBox is Asia’s leading streaming music service, with over 30 million
tracks from 500 local and major labels, and the most comprehensive
collection of Asia-Pop in the world. Featuring both free and premium
options, the service also includes mood-based programming and
supplemental content including music news, videos, concert updates
and more.
On Device Music
DTS Play-Fi puts your mobile music collection at your fingertips,
automatically finding and indexing the songs stored on your device. You
can browse and stream by album, artist or genre, and even use your
existing playlists. DTS Play-Fi supports local files in multiple formats,
from MP3 all the way up to premium CD and lossless quality encoding.
Free, with no subscription required.
1. For Audiolab 6000N the COAX and OPT outputs transfer the PCM digital signal at up to 24 bit/192kHz resolution.
2. Using the DTS Play-Fi APP the volume of the analogue output can be controlled. When using the 6000N with the Audiolab 6000A amplifier, connect the USB
Control Interface to the 6000A Update input to synchronise the volume of the 6000A using the APP.

10.APP operations - 2 Page 13
Media Server
Got a hard drive full of music? Avid digital collectors can access and
stream from media servers using DTS Play-Fi. The system automatically
discovers and indexes music from DLNA and UPnP servers on your
network. You can select and stream files in multiple formats via DTS
Play-Fi, including premium tracks encoded at CD quality or even
24-bit/192kHz lossless content. No subscription required.
Napster
Napster integrates the heritage of streaming market pioneer Rhapsody
into its premium, ad-free on-demand service. With 30 million tracks,
instant playlist creation, and anytime, anywhere access, Napster is
justifiably popular on multiple continents with millions of subscribers.
Pandora
Listen free to music you’ll love, as Pandora’s streaming service evolves
with your tastes. Give songs a thumbs up or down, and your stations
become more personal the more you listen. Enjoy the service at no
charge with ads, upgrade to Pandora Plus for commercial-free
streaming, or try Pandora Premium to add on-demand features and
premium sound quality to your experience.
Qobuz
Based in France, Qobuz was founded and built around a premium audio
quality experience. It boasts 70,000 albums available for streaming at
24/192, with many more streaming at 16/44 CD quality. The service also
features in-depth artist profiles and editorial content.
QQMusic
China’s largest music streaming service offers tens of millions of tracks
and thousands of radio stations to its 400 million monthly active users.
With free and premium tiers, and both local and international content,
QQ Music is a dominant force in music listening in China.
SiriusXM
With over 150 channels of commercial-free music plus sports, talk,
comedy, entertainment, news and more, it’s no wonder that Sirius XM is
one of the most widely used premium streaming services in North
America. It’s a snap to go from listening in your car to listening at home
with DTS Play-Fi.
SoundMachine
Business never sounded so good! Whether it's in an office or a
restaurant, a retailer or a hotel, background music enhances both the
customer and the employee experience. Hundreds of stations and
millions of songs, including the ability to create artist stations, so you
can design the perfect sound for your brand. Fully licensed for
business environments.
Spotify
Their motto is “Music for Everyone”, and with millions of listeners
around the globe, Spotify seems to be onto something. Create and
share playlists, or choose from thousands of curated collections.
Spotify Premium subscribers can stream directly to any DTS Play-Fi
enabled speaker directly from the Spotify App. Available in the US and
more than 50 other countries. The Spotify Software is subject to third
party licenses found here:
www.spotify.com/connect/third-party-licenses.
Use your phone, tablet or computer as a remote control for Spotify.
Go to spotify.com/connect to learn how
Tidal
High Fidelity Music Streaming is Tidal’s hallmark. Every track on the
service streams in premium audio format, with most in lossless CD
quality or above. The service also boasts many exclusive new releases,
artist-curated stations and in-depth features designed to complement
the music offerings. Available to DTS Play-Fi users in the US and more
than 50 other countries.
In addition to the support listed above, it also supports music
services such as BBC, ESPN RADIO, HD tracks, NPR, tunein and so
on, and there will be more music platforms involved in the
development.
DISCLAIMER: Not all music services are available in all regions and
countries.

10.APP operations - 3 Page 14
Speakers Group
To stream music from 6000N Play to multi-room Devices such as DTS Play-Fi enabled Speakers, open the DTS Play-Fi APP, find the Device or Speaker, give it a name and then add it.
To delete the Device or Speaker, just click on the right side of the Device name and then delete.
Currently it is not recommended to wirelessly stream Hi-Res audio to speakers if you want stable, uninterrupted playback.

10.APP operations - 4 Page 15
Spotify Group
Open Set Up in the DTS Play-Fi APP; click the Spotify Group. Create a new group and name for it, then select any DTS Play-Fi enabled products you want in this group (on the right side). Any speakers that
can't be joined to a Spotify Group will be greyed out. Once you’re satisfied, head to the Spotify app to start streaming.
So far, Audiolab 6000N Play can’t support the playing of “Surround Sound”. For common problems in utilization and fault diagnosis, you can open the APP settings to find the "Fault diagnosis", then enter
the DTS Play-Fi website knowledge base which has detailed information.
If the system is updated, click “Update System” and the process will carry on automatically. Click “About”, you can see DTS Play-Fi’s APP version and the status of network connection, IP address and versions
of the module software and MCU. For 'Advanced Settings' you can choose from various options - the default mode is recommended.

11.Warranty Page 16
Audiolab Ltd. warrants this product, subject to the terms and conditions below, to be free from
defects in materials and workmanship. During the warranty period Audiolab will repair or
replace (at Audiolab’s option) this product, or any defective part in this product, if it is found to
be defective due to faulty materials, workmanship or function. The warranty period may vary
from country to country.
Terms and conditions
The warranty starts on the date of purchase (or the date of delivery if this is later).
You must provide proof of purchase/delivery before work can be carried out. Without this
proof, any work carried out will be chargeable to you.
All work will be carried out by Audiolab or its authorized agents or distributors.
Any unauthorized repair or modification will void this warranty.
If any part is no longer available it will replaced with a functional replacement part.
Any parts that are replaced will become the property of Audiolab.
Any repair or replacement under this warranty will not extend the period of warranty.
This warranty is valid only in the county of purchase, applies only to the first purchaser and is
not transferable.
The following are not covered:
1. Products which the serial number have been removed, altered or otherwise made illegible.
2. Normal wear tear and cosmetic damage.
3. Transportation or installation of the product.
Accidental damage, fault caused by commercial use, acts of God, incorrect installation,
connection or packing, misuse, neglect or careless operation or handling of the product which
is not in accordance with Audiolab’s user instructions.
1. Repairs or alterations carried out by parties other than Audiolab or its authorized agents or
distributors.
2. Products not purchased from an Audiolab authorized dealer.
3. Products that were not new at the time of original purchase.
4. Products sold ‘as is’, ‘as seen’ or ‘with all faults’.
Repairs or replacements as provided under this warranty are the exclusive remedy of the
consumer. Audiolab shall not be liable for any incidental or consequential damages for breach
of any express or implied warranty in this product. Except to the extent prohibited by law, this
warranty is exclusive and in lieu of all other warranties whatsoever, both express and implied,
including, but not limit to, the warranty of merchantability and fitness for a practical purpose.
This warranty provides benefits that are additional to and do not affect your statutory rights as
a consumer.
Some countries and U.S. states do not allow the exclusion or limitation of incidental or
consequential damages or implied warranties so the exclusions in the paragraph above may
not apply to you. This warranty gives you specific legal rights, and you may have other
statutory rights, which vary from state to state or county to county.
How to claim:
To obtain warranty service contact the Audiolab authorized dealer from which you purchased
this product. Do not dispatch goods without the prior agreement of the dealer, Audiolab or
their authorized distributors.
We may refer to a local service centre. For international regions, please contact:
IAG House, 13/14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK.
Tel: [phone] Eml: [email protected]
If asked to return products for inspection and/or repair, pack carefully, preferably in the
original cartons or packing affording an equal degree of protection, and return prepaid. If
unsuitable packaging is used, Audiolab may make a charge for the supply of new packaging.
Insurance is recommended and goods are returned at owner’s risk. Audiolab or their
authorized distributors cannot be held liable for loss or damage in transit.

12.Specifications Page 17
Measurement made with 230V power supply
Model
Digital Section:
Digital Output Level
Output Impedance
Frequency Response
Maximum Resolution
Digital Output
D to A Converter:
Variable Output Voltage
DAC
Frequency Response
Total Harmonic Distortion (THD)
Signal-to-noise Ratio (S/N)
Analogue Output Impedance
Standby Power Consumption
Requirements
(depending on region)
Dimensions (Unpacked)
Dimensions (Packed)
Net Weight
Gross Weight
6000N Play
500 +/- 50mVpp
75 ohm
+/-0.01dB (20Hz-20kHz,ref.1kHz)
192kHz/24bit
1 x Coaxial , 1 x Optical
0 – 2.1V
ES9018K2M
+/-0.5dB(20Hz-20kHz,ref.1kHz)
<0.003% (1kHz @0dBFS , BW=20-20kHz)
>115dB(A-weighted)
100 ohm
<0.5W
220V—240V~50/60Hz
100V—120V~50/60Hz
445*313*65.5mm (LxWxH)
500*445*140mm (LxWxH)
4.9Kg
6.5Kg
Correct disposal of this product. This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsible to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental safe
recycling.

Media Server
Got a hard drive full of music? Avid digital collectors can access and
stream from media servers using DTS Play-Fi. The system automatically
discovers and indexes music from DLNA and UPnP servers on your
network. You can select and stream files in multiple formats via DTS
Play-Fi, including premium tracks encoded at CD quality or even
24-bit/192kHz lossless content. No subscription required.
Napster
Napster integrates the heritage of streaming market pioneer Rhapsody
into its premium, ad-free on-demand service. With 30 million tracks,
instant playlist creation, and anytime, anywhere access, Napster is
justifiably popular on multiple continents with millions of subscribers.
Pandora
Listen free to music you’ll love, as Pandora’s streaming service evolves
with your tastes. Give songs a thumbs up or down, and your stations
become more personal the more you listen. Enjoy the service at no
charge with ads, upgrade to Pandora Plus for commercial-free
streaming, or try Pandora Premium to add on-demand features and
premium sound quality to your experience.
Qobuz
Based in France, Qobuz was founded and built around a premium audio
quality experience. It boasts 70,000 albums available for streaming at
24/192, with many more streaming at 16/44 CD quality. The service also
features in-depth artist profiles and editorial content.
QQMusic
China’s largest music streaming service offers tens of millions of tracks
and thousands of radio stations to its 400 million monthly active users.
With free and premium tiers, and both local and international content,
QQ Music is a dominant force in music listening in China.
SiriusXM
With over 150 channels of commercial-free music plus sports, talk,
comedy, entertainment, news and more, it’s no wonder that Sirius XM is
one of the most widely used premium streaming services in North
America. It’s a snap to go from listening in your car to listening at home
with DTS Play-Fi.

Audiolab
IAG House,
13 /14 Glebe Road,
Huntingdon,
Cambridgeshire,
PE29 7DL,
UK
Tel: [phone]
Fax: [phone]
http://www.audiolab.co.uk
CODE: AH14-MNL0004a