AudioSonic HDT909 User manual
audiosonic
High Definition Set Top Box with PVR
HDT909
OWNER'S MANUAL
audiosonic
0
®
,
\
Read this manual before installation and use.
TO REDUCE
THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR
MOISTURE.
CAUTION:Tor-educe,.
risk of fire and electric shock,
do
nOt
remove the cover (or back) of
infersontiCireg May to
qualified service personnel.
A
lbeligliliiitiglibah antis arrowhead symboi, within an equilateral
Mitmille-Mmitended to alert the user to the presence
of
uninsulated
liallitjetaimudagesraithin product's en( lo s
LI C that
may be of
imIntimittimtignitudetoconstitute a risk of electric shock.
11.
IMIMMIMMMimilbellietallimeaccorripanying the appliance.
Ilbeemdltitititatitipaintorathin an equilateral triangle is intended to
aftsilliMeimeilmtherresenceot important operation and servic.ing
WAIIM11.101.111111C101E11191.40F FOE
OR ELECTRIC SHOCK, DO
NOT 01709E1IIIISAIPPLOINCEMOSAIN OR
MOISTURE.
GUJT1014110 MEU0NITITLECNICINOOL MATCH
WIDE BLADE OF
PLUG TO
WOE SLOT A111111TUIL111111E.T.
The alMmrifressbaillimiltbresipmellitidltipplig or splashing; and that no
obgeers hied midi btitaiels. midliimiimes.stial be piar.e on the apparatus.
The apparans urn not beurposed to
dripping or splashing and that no objects
1Wed
liquido.souln as vases shall
be placed on the apparatus.
Cakariorr
latteisain
electrical safety.
Powerl.e operated equipment or accessories
conned. rerofts mut shook' bear
safe, certification rnark on
the
accessory itself
and shimidnimbemmillibeesoas to defeat the safety features. This will help a
VOI
d
any and Urouleade be ruudifted
se
as
to defeat the safe:, features. This will help
avoid
any potential Award
dectrical shock or fire. If in doubt, contact
qua... service "remand&
Accessones- Do roort place Ws vole°
product on an unstable cart, stand, tripod,
bracket. cx timbre Themtlemprodiact may fall, causing serious injury to a child or
adult as
del Bunn damage Oa the
video product. Use this video product only
welch a cart Om. mom. nradret. or
table recommended by the manufacturer,
sdd
near
Voe order parsdurt_
1 la. Aside°
product and Garr ebitibriation
should be moved with care. Quick stops,
excessive farm a...ma surfaces
may cause the video product and cart
combination
modensark
Use
12.
Clearing-
Unguro.
alrms
nolleepeactloct
from
the
wall outlet before cleaning.
Do not
use bowie dames., aerosol
deaners. Use a damp cloth for cleaning.
IMPORTANT SAFEGUARDS
In addition to the
careful atilenlitindroned to
quality standards
in the manufacture
Of your itilendpnlallit. Safety is
a major factor
in the design of every
insalanent.
Iiiumewet.
Safety iS
your
responsibility, too.
This sneer.% minplinantiliOnna ti o n
that will
help to assure yoUr
enjoyment
notininpnt
Meet the
Vide()
product and accessory
equipollent_ nentleleadthern
carefully
before operation and
using yOuirsideappoduct
Installation
1
Re. and Follow Instructions-AS
tiesafetrommlitiptmadon
instructions
should be read before the video
proitielibmiptiolleiL Fallow
all
operating instructions
2.
Retain
Instructions The safety
and apimamMiwiftia
should be
retained for future reference.
3.
Heed
all
Warnings-Comp, with
a.
rorram.samarrudeoproduc t
and
in the operating instructions.
Polar,ation- Some video products ateeMM.MMIMM.P.Ifized
alternating -current line plug. This
pkagmillMtiminikeromer
outlet, try
reversing the plug. 11 11101)9
plug still faststolk
bomtimitymmelectrician to
replace your obsolete outlet. To
prevent ellettansnon-do not
use this
polarized plug with an extension cord.
recepuele.uraner outlet
unless
the blades cart be fully inserted without
titadeeigiimme gyou
need
an
extension cord, use a polarized cord.
5.
Power Sources- This video product
shouldleammisimilmtity from
the
type of
power
source indicated on the
manimisimbeit iltrmare
not
SUIC
01 20 4848 02 power supply to your
home caumirpoorroilleo
dealer or
local power company For video products imemilleltlisitiperate from
•
battery power. or other sources, refer to
the tiptia...titnixtions
6.
Overloading Do
not overload
wall
outlets orensumicarots as
this can
resultina risk of fire or electric shock. OverlossettilACtimiletts extension
cords. frayed power cords. damaged or
cradeemmeMmitation.
and
broken pfugs
are
dangerous. They may resultiliaitimelt wire hazard.
Perioduarly
examine the cord, and if its
appearance micas. damage
or
deteriorated insulation, have it replaced
byjnorrerrouruechnuian.
7.
romer-Cord Protection- Power-supply coats stimmiliftemmitied so that
lOrc, are
not like, to be vvaiked on
or pincliemagribesplated upon or
against
them, paying particular a ttention tocumeEatipii, comrernenc e
receptacles, and the point where they
entfaimilieuitileoptimduct.
'Where
the MAIN plug or an appliance coupletimmiellseetiticonnect
Orrice.
the
disconnect device shall remain
realii411.115011111M
13.
04/1'1311w mu, sturdr,drargerorra 'rata,
points or
-
short-out' parts could result in
a fire or des,.
Mime
Newer
spil liquid of
any kind
on the
video prodact.
14.
trghoring,For nen. prourectran chrs video
product during a 14111119 storm, or
when it ate.
droideoded amid asued for
long periods of time, unplug it from the
watt
outlet andosooreect dreordenna
or cable system. This will prevent damage to
the videC product
Owe=
bollarung and power
line surges.
Service
15
Sernatm1
-
00.MMIMMXIIIMMttierilorlhis .deo product yourself. as (pe)wig of
removing
coders artawunore pew Id dangerous
voltage or other
hazards
04181 11
servicing
Id ipuilitudderucr persednet
II
120220
Simeerkaripwitih s video produc
t from the wal, outlet
and
refer
servo.. ua oruillhat serume personnel
under the following conditions.
A.
When neptuder-supprowdarplug damaged.
..quitinslinernnutorollpects
have fallen
into the video product.
C.
if the wars
woes.
.issaern mowed to rain or water.
D.
the roundoes opune dormally
by following the operating
instruction.
Atrium
aidiplimecommoisitiat air cowered
by operating instructions.
Improper aillimmmentaSaMier combs. may result in damage and will often
requrnearususorearour anuailed
technician to restore the video product
to its
notrotadpounart
E
It
the
doetoputuarbeedniopped Of
cabinet has been
damaged.
When neudietromint tuddlusa nstinct
change in performance-this
inchunuaourdlormiroce
1 7
Replacement
Parer-ilkdraepuoreomutpuns are
required, have the service
technician
sbruses have the same safety
characteristes
asittedurrinpates. 0211meaTrepiacements
specific, by the video
product
mardiauduconneremlbe_ eltanc
shock. or other hazards.
18.
Safety
Check-Lipercurrolleolmeurarrysenwor or
repairs to this video product, ask
the service
tedititiosmi
sae,
die.
recommended by the manufacturer
to determine fratWorvides
san sale operating
condition.
19.
It
The procidunountoesnunntoadortroch
heat sources such as radiators.
heat registers. swim ar
wartromilietwaselitalfng
amplifiers, that products heat.
ft Ventilation- Slots and openings in the casemx,immdeitiirventilation
to ensure rel:able operation of the video pratibuctamilltmmistied it from
overheating. These openings rnust not theltiftelledmramixed. The
openings should never be blocked by pgaitingamemoliesproduct on
a
bed,
sofa, rug, or heat register.
This video product diondiurocue placed
in a
built-in installation such as a book casemiradi.
soleosproperverralation
is provided or the video product
ma nufacturersornenciima Aare
been
followed.
9. Attachment, Do not use attachments
unless reccommeroded by
the video
product manufacturer as they may cause ham..
eTe iNFORMATiON
INTRODUCTION
Front panel
Rear panei
12
,--
Arme contro;
TOOLS
Tools
Tools main menu
Information
Factory Setting
Software Upgrade
Remove USE device safely
GAMES
Game
REC
REC main menu
Media Player
PVR Information
PVR Setting
TIMESHIFT/RECORD
Timeshift
Record
2
RF IN
RF OUT
0
°
0
AC 220-240V
-50/60Hz
COAXIAL
HCMI
Front panel
Display
Remote sensor
USB port
audiosonic
-
..'=. JSB
0
F
-
1
,
Rear panel
TV aerial
for an external TV aerial
Coaxial Digital Audio
Composite Video
Down Mix Audio
2 Channel L/R
AC Mains
HDMI Output
RF Loop through
for
an
external device
11[English
etz
.
-!
ZW
Remote control
•
STANDBY
(switch the STB on and standby)
•
Numeric entry
(Enter numeric values and select the channel
directly by entering it's number)
•
INFO
(Press for current program information )
4, Menu
(Open and close the menu screen)
•
Cursor
(Navigation buttons used to
navigatemenus items)
O
OK button
(Confirm a selection within a menu)
•
RECORD
(Record the TV program)
o
\0
( /
vc
/-:Volume Up and Down)
O
TTX (Open interactive service)
•
PREV(previous)
•
MEDIA
(Enter Record menu)
USB
(Switch to USB device)
al NEXT
•
MUTE (Turn off/on the volume)
EPG
(Open up Electronic Program Guide Menu)
(1) AUDIO
(Select audio mode and audio track)
(1) SUBTITLE (On/Off Subtitle)
•
TV/RADIO
(Switch between TV and Radio)
41) RECALL
(Switch to previous channel)
•
EXIT (Exit from menu)
e
STOP
CH+,-
(CH+/-: Channel Up and Down
FAV
(Open the Favorite list)
•
REV
(Press REV button to rewind the playback)
6)
PLAY
a) FWD
(Press FWD button to fast forward
the playback)
ED
PAUSE(Pause/Active timeshift function)
RED/GREEN/YELLOW/BLUE Buttons
(For interactive function/Submenu
function buttons)
rj
English
General
There are many different types of TV and other equipment that you can connect to the STB.
In this manual you will see some of the most common ways to connect your equipment.
Connecting the
HOW TV
Connecting a HIFI system
Hi-Fi
Coaxial cable
English
English
4
Welcome
If you use the STB for the first time, the "Welcome" menu appears.
Press cursor button to setup the Region, Language, Display Mode
and Aspect Mode.
Highlight "OK" and press the "OK" button to start channel search.
Installation
®
Press the "MENU' button to enter main menu.
0 Press "UP"or " DOWN " button to highlight "Installation", press
"RIGHT" button to enter the Installation menu.
0 Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK"button to enter the sub-menu .
® Press "EXIT" button to exit.
Channel Scan
Select "Channel Scan', press the "OK" button to enter the
Channel Scan menu.
0 Press cursor button to set Scan mode, Scan Band ,Channel No.,
Frequency and Bandwidth, then highlight "Search", press "OK"
button to start channel scan .
Auto Scan
®
Select the "Auto Scan", press "OK" button to enter the Auto Scan menu.
0 Press the cursor button to set "FTA Only", then highlight "Search",
press the "OK" button to start auto scan .
•
FTA Only: Free to Air, program that don't require subscription
(or ongoingcost) or one-off free(e.g. pay-per-view)
LCN
If LCN( Logical Channel Number) Select function is activated, you can't change the original
number of TV channels by scanning .
You can activate/disactivate the LCN function by setting the "LCN " to on/off.
3119
01:30
02
-
.00 02 0350
0000 Itiforecon
0039138C P. Teel, c CommoneCtteesireser
qooi.
sae
FO u e's
We
on Smut Pr on ,
0011 Clieebie TVs ie C. es
0012 301
Changing Channels
There are three ways of channel selection - stepping through the channel list, selection by number
and from the on-screen channel list.
® Stepping through the channel list:
To move through the channel list, press the upward arrow or downward arrow key on the
remote control.
0 Selected by_number:
Enter the channel number directly by pressing numeric buttons ,and press the "OK" button
to select desired channel.
0 Selected by on-screen channels list:
You can also select the required channel directly from on-screen channel list. This is
displayed using the STB's main menu. See 'Edit Channel" in this manual for operation detail.
Accessing the Electronic Program Guide (EPG)
Accessing_the EPG of all channels:
0 Press "EPG" button to enter EPG menu .
Press cursor button to switch between channel list, events
schedule of the selected channel and now/next events.
0 Press "Green" button to Timer the events.
•
Timer events: Record selected event programs even the
program time has changed.
® Press "Red' button to display " Time Bar' menu.
•
Time Bar:set recording period from preset period of time.
in
English
Edit Channel menu
0 Press the "MENU" button to enter main menu.
0 Press
"UP"
or "DOWN " button to highlight "Edit Channel", press
"RIGHT" button to enter the Edit Channel menu.
0 Press "UP" or 'DOWN." cursor button to highlight the desired item
and press "OK' button to enter the sub-menu •
0
,
Press "EXIT" button to exit.
TV Channel
list
C) in the Edit Channel menu, select "TV Channel List", press "OK"
button to enter TV channel list menu •
•
0 Press "UP" or "DOWN" button to highlight channel, press the "OK"
button to preview the desired TV channel.
Use this menu to favor, lock, skip, move, sort, delete and rename
channel.
•
Press "FAV' button, then press 'OK" button to edit the FAV
function.
•
Press "color" button, then press "OK" button to edit the
corresponding function.
Radio Channel list
0 In the Edit Channel menu, select "Radio Channel List", press "OK" button to enter the Radio
Channel list menu.
0 Press 'UP" or "DOWN' button to highlight channel press the 'OK" button to listen the desired Radio
channel.
r4,04.0
e TVcbgntvips •
iff0.0Atip: 7.R4stio f1.4nne
Delete All
0 In the Edit Channel menu, select "Delete All, press "OK" button.
You are asked to input a password(the default password is"0000").
53 A warning window appears.
Select "Yes", press 'OK" button to delete all channels.
Select "No", Press "OK" button to cancel deleting.
Warning! Do you really want to delete
all channels?
Ye 1
System setup menu
System setup menu allows us to set Language, TV System, Local Time
Setting, Timer Setting, Parental Lock, OSD Setting, Favorite, Auto
Description Setting and Other.
0 Press the "MENU" button to enter main menu.
Press "UP" or "DOWN" button to highlight "System Setup",
press "RIGHT" button to enter the System Setup menu.
® Press "UP" or "DOWN" cursor button to highlight the desired
item and press "OK" button to enter the sub-menu.
® Press "EXIT" button to exit.
Language
This menu allows you to set Language.
TV System
This menu allows us to set Video Resolution, Aspect Mode and
Digital Audio Out.
Video Resolution:
Aspect Mode:
Digital Audio Out:
Local Time Setting
By Source/ By Native TV/480i/480p/576i/
576p/720p_50/720p_60/10801_25
1080i_30/1080p_50/1080p_60
Auto/4:3PS/4:3LB/16:9
LPCM Out/ BS Out
1,enguilio
TV,cystetn.:
Local
•
S SDSotiOt:
,
9t*,
This menu allows you to set the region and time.
Region;
This menu is used for changing the region setting.
GMT Usage: This menu is used for open the usage of GMT.
The options are : By Region/User Define/Off
If GMT Usage set to following"By Region",time will
synchronizefrom TV broadcastingstream."User Define",
time setting will according to user defined GMT time zone
"Off",time will set
user maunally.
•
GMT Offset: This menu is valid only when selected "User Define"
in GMT Usage menu .
The GMT offset range is "-1 1:30 - + 12:00", increasing
half hour progressively.
Summer Time: The options are: On/Off
Date:
"Date' and "Time" menus are valid only when selected "Off" in GMT Usage menu.
Time:
Press numeric button to input the time.
Engli0
COEP
HIJKL
MNOPQR
STUVWX
Y Z 0
2 3
4 5 6 7 8 9
SP ? OK
CAPS iir.Del OH
Timer Setting
This menu allows us to set the program timer. You can set 8 timers.
xx/xxlxxxx
Timer Mode:
Off/Once/Daily/Weekly/Monthly
Timer Mode
4
Daily
_
Timer Service:
Wakeup Channel:
Channel/Record
You can select a desired channel as the wakeup channel.
;
i
4:
1
1:474:
e
Wakeup Date "
On Time
13
C
IPC70112
xx/xxlxxxx
xx:xx
Wakeup Date:
Press numeric button to input date.
Duration
xx:xx
On Time:
Press numeric button to input the time.
CSI
—
TliT)
Duration:
Press numeric button to input the duration time.
Parental Lock
This menu allows you to protect menu and channel, and change the
Password.
0 In "System Setup" menu, select "Parental Lock" and press "OK' button,
you are asked to input a password(the default password is '0000')
0 After inputting the correct password by pressing numeric buttons,
the parental lock menu appears.
Menu Lock To lock the Edit channel/ Installation menu. When you
want to enter these menus, you must input the password.
You can set menu lock to on/off.
Rating Lock:
Off/P/C/G/PG/M/MA/AV/R
New Password: To change the password.
Confirm Password: To confirm the new password.
OSD Setting
This menu allows you to set OSD Timeout and OSD Transparency .
OSD Timeout: I - I 0
•
OSD Transparency, To set the OSD transparency to Off/10./o/20%/300/
40%.
Favorite
This menu allows you to rename the favorite group.
(i) in Channel menu, select "Favorite", press "OK" button to enter
Favorite menu.
0 Select desired group, press 'OK" button to open the mock keypad.
Input letter and numeric one by one by pressing the cursor button
and press 'OK" button to confirm. After finishing input, highlight
"OK" on mock keypad to confirm, you change Favorite group name
successfully.
C) Press "EXIT button tp quit the group rename menu.
8
English
Audio Description Setting
This menu allows us to set AD Service, Use AD as default and
AD Volume Offset:
AD Service:
On/Off
Use AD as default:
On/Off
AD Volume Offset:
-3"3
Other
This menu allows us to set LNB Power, Channel Play Type, Beeper and
Auto Standby.
LNY Power:
On/Off
When "LNB Power" is selected "On", the STB will provide 5V power
. to antenna.
It will not provide when selected "ofr.
Channel Play Type:
All/Free/Scrambled
Beeper:
On/Off
Auto Standby:
30Min/ 1 Hour/2 Hour/3 Hour/Off
No command to STB on front panel or Remoter in 30 Min- 3 hours and no timer event,
the STB will enter standby mode automatically.
If Off is selected, the STB can't enter standby mode automatically.
111:11Figlish
Tools main menu
® Press the 'MENU" button to enter main menu.
02
Press "UP" or " DOWN " button to highlight "Tools", press "RIGHT"
button to enter the Tools menu.
® Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK" button to enter the sub-menu.
® Press "EXIT" button to exit.
Information
This menu can display some parameters information in this STB.
0 In "Tools" menu, select "Information", press "OK" button to open
information window.
® Press "EXIT" button to exit.
Factory Setting
This menu allows you to re-set the STB back to factory settings,
clear all existed channels.
0 In the "Tools" menu, select "Factory Default", press "OK" button.
You are asked to input a password(the default password is"0000"J.
C) A confirmation window is displayed.
Select "Yes" to return back to factory settings and clear all channels.
Select "No" to cancel back to factory settings.
® Press "EXIT" button to exit .
Software Upgrade
We offer the functions for user to upgrade software version by OTA
or by USB.
®
Enter "Tools" menu, select "S/W Upgrade by OTA" or "Upgrade
by USB", press "OK" button, Software Upgrade menu is shown.
® Press cursor button to select the desired item, then highlight
"Start" and press "OK" button to start upgrade.
0 Press 'EXIT" button to exit.
Remove USB device safely
In "Tools" menu, select "Remove USB device safely',
Press "OK" button to confirm. Then a window is displayed.
Press *OK" button again.
10
English
Game
This menu allows you to play games.
D
Press the "MENU' button to enter main menu.
Press "UP" or "DOWN" button to highlight "Game", press "RIGHT'
button to enter the Game menu.
® Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK" button to enter the game.
® Press "EXIT" button to exit.
En
English
REC main menu
® Press the "MENU" button to enter main menu.
Ci) Press "UP"or "DOWN" button to highlight "REC", press
"RIGHT" button to enter the REC menu.
Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK"button to enter the sub-menu.
® Press "EXIT" button to exit.
Media Player
This function allows you to play files from USB port .
In 'REC" menu, select "Media Player", press "OK" button to enter
Media Player menu.
© Once you enter media player window, the highlight is on the
device you've connected to the USB port. Press "Down" button
to move the highlight to directory or file.Then press "OK" on your
remote to select.
® Press "I" button ,you can switch TAB between
Music/Image/Video/Record.
Press "UP" or "DOWN" cursor button to select a desired item,
and press "OK" button to play the desired files.
® Press "EXIT" button to exit.
Music:
'RED' button:
Press "RED" button to show Play List.
"GREEN" button:
Move the highlight to the file which you want to add.to play list, then press
"Green" button to add. It will mark a favorite icon on the file.
"YELLOW' button: Press "Yellow' button to add all file of current directory to play list. Press again to
delete all file of current directory from the play list.
"BLUE' button:
Press "Blue" button to enter to edit sub-menu.Once get in sub-menu you may
allow to "Renarne","Copy',"Delete" or "+Folder(to create new folder)",once it's
done,You'll need to press"EXIT"back to the root directory.
"2' button:
Press "2" button to open the sort window.
You can sort by Name/Time/Size/Favorite,
"INFO" button:
Press "INFO' button to set repeat mode. The option is Repeat Folder/
Random Folder/Repeat One.
'EXIT" button:
Return to parent directory.
Image;
"RED
-
button:
Press "Red" button to show play list.
"GREEN" button: Move the highlight to the file which you want to add to play list, then press
"Green" button to add. It will mark a favorite icon on the file.
"YELLOW" button: Press "Yellow" button to add all file of current directory to play list. Press again to
delete all file of current directory from the play list.
Press "Blue" button to enter to edit sub-menu. Once get in Sub-menu,you may
allow to "Rename"."Copy;Delete" or "+Folder(to create new folder),once it's
done,you'll need to press"EXIT" back to the root directory.
Press "2" button to open the sort window.
1004:ta
You can sort by Narne/Time/Size/Favorite.
JPG,J
Press "INFO" button to open image setup
15; •
,
Press "3" button to view image in multi view mode !'
49
.
V
!
"
TRO
,
' •
Return to parent directory.
in
English
"BLUE' button:
.
"2' button:
"INFO' button:
"3" button:
"EXIT" button:
Video*,
"BLUE" button: Press "Blue" button to enter to edit sub-menu. Once get in Sub-menu,you may
allow to "Rename"."Copy",'Delete" or "+Folder(to create new folder),once it's
done,you'II need to press"EXIT" back to the root directory.
"2" button:
Press "2" button to open the sort. You can sort by Name/Time/Size.
"EXIT" button:
Return to parent directory.
•
Record:
"RED" button:
Press "Red" button to open rename window.
"GREEN" button:
Move the highlight to the program which you want to lock. Pressing "Green"
button, it will ask you to input password. Default password is "0000". After
input correct password, the program is locked. If you want to unlock the
program, press the "Green' button again.
"YELLOW" button: Press "Yellow" button to make a delete mark on the program which
you want to delete.
"EXIT' button:
Return to parent directory.
•
PVR:StOrage Information
This menu can display some parameters of Removable Disk.
0 In "REC" menu, select "PVR Storage Information', press "OK"
button to open USB Disk A information window.
0 Press "EXIT" button to exit.
•
Format
. FAT/NTFS
Press YELLOW button to open Format menu.
Press "LEFT" or "RIGHT" cursor button to change Disk Mode.
Select "OK" to format. Select "Cancel" to cancel.
The FAT file system is a legacy file system which is simple and robust. It offers good performance ,
(Default Setting)
NTES(New Technology File System) a several improvements over FAT system like, the use of
advanced data structures to improve performance, reliability,and disk space utilization.
•
DVR Set
REC&TMS/Record/Timeshift
Press BLUE button to open DVR Set menu.
Press "LEFT" or "RIGHT' cursor button to change DVR Type.
Select "OK" to confirm. Select "Cancer to cancel.
PVR Setting
This menu allows us to set the PVR Setting.
Press "UP" or "DOWN" cursor button to select desired item,
press "LEFT" or "RIGHT' cursor button to change the setting.
•
TimeShift
AUTO/Pause/Off(default is Auto)
•
Timeshift to Rec
.
ord
On/Off (default is Off)
•
PS Record
On/Off (default is Off)
English
Plugging an external Mass Storage Device on the USB port gives you access to Time Shift/Record
a broadcast programme.
•
Pause a broadcast programme and continue watching it later Time Shift )
•
Record a broadcast programme.
•
When the space available on the Mass Storage Device runs out, recording operation of
broadcast will stop.
gEla
Please
esn
lfStt
d
l
stwpnreCaringortitpeshift.
f
timeshi an
"cig fe4tOrei.y9,uheed_tal(tibigger stie
.
..U$B pen
(trivet or .17i0S;
r
.c9
,41
.007:
Timeshift
Initiate
•
Time Shift can be done in viewing mode by pressing the
"PAUSE" button.
•
Press 'RIGHT" or 'LEFT" button to move the cursor to
the time you desired to view. Press "OK" button to confirm.
Trickmodes
During the playback, it is possible to perform the following actions
•
Press "PAUSE" button to pause the playback
•
Press "FORWARD" button to fast forward the playback
•
Press 'BACKWARD button to rewind the playback
Stu the Time Shift
Press "STOP" butteon to stop TimeShift.
Record
Instant
record
•
In viewing mode, press "RECORD" button to instantaneously start a record on the current channel.
•
Press "RECORD" button again can input duration.
Press "STOP" button to stop recording, then a confirmation window appears.
•
Select "Yes" to stop recording. Select "No" to continue recording.
NOTE:
Please use a good quality high speed USB 2.0 HOD or USB stick for Recording and Timeshift functions.
Use of low quality USE devices may not function properly on this machine.
14
English
In some region, the digital terrestrial signal may be weak. So you'd better use the antenna in
which the booster was built, for watching the weak signal channels.
Problem
Possible cause
What to do
Standby light not lit
Mains lead unplugged
Check mains lead
No signal found
Aerial is disconnected
i
Aerial is damaged/misaligned
Out of digital signal area
Check aerial lead
Check aerial
Check with dealer
No picture or sound
Wrong input source in TV setting
Check the correct STB input
source to TV
Scrambled channel
message
Channel is scrambled
Select alternative channel
No response to remote
control
Remote control not aimed correctly i
Front panel obstructed
Remote control batteries exhausted;
Aim remote control at front
panel
Check for obstructions
Replace remote control batteries
Forgotten channel lock
code
'
Re-install channels•to cancel
channel lock
•
Forgotten menu lock
code
Contact help line
After moving the STB to
another room you find you
are no longer able to
receive digital reception
The aerial feed former new point
°
may come through a distribution
system which may reduce the
digital signal now received by the
box.
Try a direct feed from the antenna
111English
TUNER (S, CHANNEL
•
•
•
•
RF INPUT CONNECTOR x1
(IEC-TYPE, IEC169-2, FEMALE)
RF OUTPUT CONNECTOR xl
(IEC-TYPE, IEC169-2, MALE (LOOPTHROUGH))
FREQUENCY RANGE:
174MHz-230MHz(VHF)
470MHz -862MHz (UHF)
SIGNAL LEVEL:
-15 - -70 dbrn
DECODER
MPEG-2 MP@HL, AVC/H.264 HP @L4.1
MPEG-4 ASP SUPPORTED
MPEG-1 Layer 1,2/PCM/HE-AAC V1.0
ICE958 SPDIF
MAX. 48Mbit/s
4:3/16:9 SWITCHABLE •
HDMI, ROB
QPSK,16QAM,640AM
•
Video decoder
•
Audio decoder
•
INPUT RATE
•
VIDEO FORMATS
•
VIDEO OUTPUT
•
MODULATION
CONNECTION
•
MAIN POWER CABLE
•
TUNER
•
RCA OUTPUT
•
SPDIF
•
DATA PORT
•
HDMI
FIXED TYPE
ANTENNA INPUTxl, RF OUTPUT x1
V/L/R xl
COAXIAL x1
USB slot
HDM1OUTPUT xl
POWER SUPPLY
AC220- 240V, 50/60Hz
MAX. 6W
•
INPUT VOLTAGE
•
POWER CONSUMPTION
NOTE:
Design and Specifications are subject to change without notice.
ED
English]
Table of contents
