Audiovox LCM7N 7 User manual

LCM7N 7 Inch Navigation Monitor
with
Integrated Loudspeaker
Operation Manual
ELECTRONICS CORP.
®
AUDIO OX

CAUTION
1. Keep the monitor clean and dry.
2. Always seek qualified personnel to perform repairs. Never attempt your own repairs.
3. Do not drop the monitor or expose to strong impacts.
4. Do not expose to direct sunlight for extended periods of time.
-2-

Monitor Setting
The color display is equipped with OSD prompting for the monitor settings. All settings must be changed
using the remote control.
Invoking the OSD:
1. Remove the remote control from the cradle.
2. Press the - and + buttons at the same time.
3. The OSD menu "Monitor Settings" is displayed.
4. In the OSD menu, you can adjust the following settings:
• Volume: Adjust volume level of the built-in monitor speaker.
• Dimming: Adjust day brightness when light outside.
Adjust night brightness when dark outside.
• DisplayMode: Select screen display mode. The selected setting is indicated in a yellow bar.
Possible selections include:
"Normal" (4:3)
"Full Screen" (16:9)
"Cinema"
"Wide 1"
"Wide 2"
• SetupMenu: Select the following setup parameters:
- Dim.Contr.:Auto/Autooff:AutomaticbrightnesscontrolOn/Off.With
"Auto"selected, the display brightnessis automatically adapted to
theambient lighting.
- Mount. Pos: high/Low: Adaptation of the display brightness to the
monitor mounting position high/low.
- Speaker: On/Off: Controls the built-in loudspeaker On/Off.
- Monitor: 1,2 or 3: Must be set for 1.
Adjusting Setting:
1. Press the - and + buttons at the same time.
2. Press the down arrow button ( ) to select the desired menu item.
3. Press the right arrow button (X) to adjust the selected menu item. Confirm by pressing the O.K.
button.
If you use the built-in monitor loudspeaker, set the volume level in the OSD menu to the middle
setting. Use the + and - buttons on the remote control to adjust the navigation audible messages.
-3-

MONITOR SPECIFICATIONS
1. Type: 7" TFT Active Matrix LCD, 16:9 Widescreen Format
2. Display Screen Size: 4.3 x 2.5 inches (109.2 x 63.5) (W x H)
3. Resolution: 400 (W) x 234 (H) Pixels
4. Monitor Characteristics: Anti-glare Coating, IR Sensor, CVBS (Composite Video Burst Signal),
Ambient Light Sensor, RGB interface
5. Remote Operation: Adjustments Keyless via IR Remote Control
6. Power Source: +12 VDC
7. Power Consumption: 0.9 A (Typical)
8. Maximum Brightness: 400 cd/qm, Automatic Display Brightness Control
9. Operating Temperature: -20°C – +65°C
10. MonitorCabinet
Dimensions: 7.2 in x 4.7 in x 1.6 in (WxHxD)
(182 x 118 x 40 mm)
11. Weight: 508 g
12. Video Format: PAL, NTSC (Autoswitch)
13. VoltageInput: +12 Volts DC
-4-

©Copyright 2005: Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 11788 128-7324
WWW
.audiovox.com
For Customer Service
Visit Our Website At
Product Information, Photos,
FAQ’s Owner’s Manuals
-5-