Audipack FWA-120 User manual

1. Remove the 2 covers from the wall plate
2. Pre-drill the first mounting hole in the wall for the key-hole in the wall
plate
3. Install the wall arm to the wall via the single bolt
4. Measure out the wall arm and set it level.
5. Determine the other drilling holes to fasten the wall plate securely to
the wall. Use ALL mounting holes in the mounting plate.
6. Fasten the wall arm well and re-instal the cover plates.
7. Install the screen with a UFPRO or other fitting bracket for the screen
to the wall arm using the 170x170 mm pattern using M8 bolt.
FWA-120
Installation manual FWA-120
2.

Important extra information:
•Use adequate mounting material for installing this wall arm!
•Max. load see product label
•Screen will always move forward, only the head will rotate
•Never overload the wall arm
•Colour black RAL 9005
•Mounting interface 170x170 mm for M8
•A wall arm with this length will create a large momentum on the wall.
FWA-120
Installation manual FWA-120
Weight in Newton (Kg x 9,81)
Distance in Meter
Example momentum on wall and bolts:
100 Kg x 9,81 x 1,05 meter = 1030 Nm