Audison Voce User manual

www.audison.eu
- 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - www.elettromedia.it
All Specifications Subject to Change Without Notice_15/09/2011
Hi-Pass
50÷5k
Hz
By-Pass
Lo-Pass
50÷5k
Hz
Speaker Output
FILTERS
Speaker Output
Subsonic - Lo-Pass By-Pass
off÷40
Hz
50÷150
Hz
Hi-Pass
50÷150
Hz
PRE OUT FILTERS
POWER SUPPLY
Power supply voltage: 11 ÷ 15 VDC
Idling current: 3 A
Idling current when off: 0.02 mA
Consumption @ 14.4 VDC (Max Musical Power): 110 A
AMPLIFIER STAGE
Distortion - THD (1k Hz @ 4Ω ) A, B Ch: 0.05 %
Distortion - THD (100 Hz @ 4Ω), C (sub) Ch: 0.3 %
Bandwidth (-3 dB) A, B Ch: 4 ÷ 60k Hz
Bandwidth (-3 dB) C (sub) Ch: 7 ÷ 350 Hz
S/N ratio (A weighted @ 1V) A, B Ch: 100 dB
S/N ratio (A weighted @ 1V) C (sub) Ch: 87 dB
Damping factor (1k Hz @ 4Ω) A, B Ch: 100
Damping factor (100 Hz @ 4Ω) C (sub) Ch: 80
Input sensitivity: 0.3 ÷ 5 V RMS
Input impedance: 15k Ω
Speaker-In sensitivity: 1.4 ÷ 24 V RMS
Speaker-In impedance: 5k Ω
Minimum load impedance A / B / C Ch: 4Ω / 2Ω / 2Ω
NOMINAL POWER (RMS) A + B + C Ch @ 12 VDC,
THD 0,3%, 4Ω: 50 W x 2 + 120 W x 2 + 500 W x 1
OUTPUT POWER (RMS) A + B + C Ch @ 14.4 VDC, THD 1%:
• 5 Ch: 75 W x 2 (4Ω) + 140 W x 2 (4Ω) + 600 W x 1 (4Ω)
• 5 Ch: 75 W x 2 (4Ω) + 140 W x 2 (4Ω) + 1000 W x 1 (2Ω)
• 5 Ch: 75 W x 2 (4Ω) + 250 W x 2 (2Ω) + 1000 W x 1 (2Ω)
CEA SPECIFICATIONS
Output power @ 4Ω, 1% THD+N, 14.4 V:
75 W x 2 + 140 W x 2 + 600 W x 1
SN ratio (ref. 1W output):
75 W Channels: 80 dBA
140 W Channels: 80 dBA
600 W Channels: 78 dBA
SIGNALS INPUTS / FILTERS
Inputs: Pre IN / Speakers IN
Outputs: Pre OUT Full Range
A Ch Filters (Full / Hi-Pass):
50 ÷ 5k Hz (2 range) @ 12 dB/Oct.
B Ch Filters (Full / Hi-Pass / Band-Pass):
50 ÷ 1k Hz (Hi) / 250 ÷ 5k (Lo) @ 12 dB/Oct.
C Ch Filters (Full / Lo-Pass): 50 ÷ 150 Hz @ 24 dB/Oct.
OTHER FUNCTIONS
Remote IN: 7 ÷ 15 VDC - 1mA
Remote OUT: 12 VDC - 50mA
Fuse (Strip type): 100 A
Remote SUB volume adj.: (-50 ÷ 6) dB
Speakers IN Turn-on (ART): Selectable
SIZE / WEIGHT
Max size (mm/inches):
220 x 470 x 58 / 8,66” x 18,50” x 2,28”
Weight (kg/lb): 7.2 / 15.87
AV 5.1k
1650 W POWER AMPLIFIER
Five-Channel Power Amplifier
with Crossover
AV 5.1k, 1650 W (RMS) max, five-channels: with its hybrid design, it is the specialist amplifier for front + rear
+ subwoofer or multi-amplified front + subwoofer systems. Its high-quality AB Class output stage provides
two channels with 250 W (RMS), combined with another pair of A class pure audio channels rated at 75 W
(RMS), perfect for active two-way front speaker systems. The D Class mono section provides 1000 W (RMS)
for a powerful subwoofer output. AV 5.1k also allows you to replace the analog input board with the digital
one (AV bit IN).

www.audison.eu
- 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - www.elettromedia.it
All Specifications Subject to Change Without Notice_15/09/2011
Speaker Output Signal Input and Switch
A channels B channels A input B input
INPUT
B
A
B
A
B
A
INPUT
INPUT
Hi-Pass
By-Pass By-Pass
Lo-Pass
12/24 dB
50÷5k
Hz
50÷5k
Hz
Hi-Pass
Lo-Pass
50÷5k
Hz
50÷5k
Hz
Speaker Output Signal Input and Switch
A channels B channels C channels C input A input B input
INPUT
B
SUB
A+B
A
(Pre-out)
B
A
(Pre-out)
B
A
(Pre-out)
INPUT
SUB
A+B
INPUT
SUB
A+B
Hi-Pass
Band-Pass
By-Pass By-Pass By-Pass
Lo-Pass
24 dB
50÷150
Hz
50÷150
Hz
Lo-Pass
24 dB
50÷1k
Hz
Hi-Pass
50÷5k
Hz
Hi-Pass
50÷5k
Hz
250÷5k
Hz
50÷1k
Hz
FILTERS
FILTERS