Auriol Z31743A User manual

TEMPERATURE STATION
TEMPERATURSTATION
Bedienungs- und Sicherheitshinweise
BEL- ÉS KÜLTÉRI HŐMÉRŐ
Kezelési és biztonsági utalások
STACJA METEO
Wskazówki dotyczące obsługi i bezpieczeństwa
TEMPERATURNA POSTAJA
Navodila za upravljanje in varnostna opozorila
IAN 91838
METEOSTANICE
Pokyny pro obsluhu a bezpečnostní pokyny
DIGITÁLNY TEPLOMER
Pokyny pre obsluhu a bezpečnostné pokyny
TEMPERATURE STATION
Operation and Safety Notes
91838_aur_Temperaturstation_cover_LB4_PL-HU-SI-CZ-SK.indd 2 30.08.13 08:34

GB Operation and Safety Notes Page 6
PL Wskazówki dotyczące
obsługi i bezpieczeństwa Strona 27
HU Kezelési és biztonsági utalások Oldal 50
SI Navodila za upravljanje
in varnostna opozorila Stran 71
CZ Pokyny pro obsluhu a
bezpečnostní pokyny Strana 93
SK Pokyny pre obsluhu a
bezpečnostné pokyny Strana 113
DE/AT/CH Bedienungs- und
Sicherheitshinweise Seite 133
91838_aur_Temperaturstation_cover_LB4_PL-HU-SI-CZ-SK.indd 3 30.08.13 08:34

3
A
1
2
3
4
5
7
8
9
10
12
11
13
14
15
17
16
6
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 3 30.08.13 08:34

4
B
18
x1
20
19
21
22
C
x1
x1
23
24
25
2627
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 4 30.08.13 08:34

5
D
x1
28
E
x1x1
29
30
3132
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 5 30.08.13 08:34

6 GB
Proper use .................................................Page 7
Description of parts
and features.............................................Page 7
Technical data.........................................Page 8
Safety
General safety information ............................Page 9
Safety instructions for batteries......................Page 11
Before initial use
General information.......................................Page 13
Preparing to use the outdoor sensor .............Page 14
Preparing the weather station for use ...........Page 14
Weather station..............................................Page 16
External sensor................................................Page 16
Setting the language/time zone /time /
date manually.................................................Page 17
Displaying summer time .................................Page 18
Calling up the time zone................................Page 19
Setting the alarm time.....................................Page 19
Calling up the alarm times.............................Page 20
Switching the alarm on/off...........................Page 20
Using the snooze button ................................Page 20
Displaying temperature..................................Page 21
Calling up the minimum/maximum values ....Page 21
Displaying temperature trends.......................Page 22
Battery state display.......................................Page 22
Replacing the batteries...................................Page 22
Troubleshooting....................................Page 23
Cleaning and maintenance.........Page 24
Disposal........................................................Page 24
Declaration of conformity............Page 25
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 6 30.08.13 08:34

7GB
Temperature station
Proper use
The weather station displays the indoor and out-
door temperatures in Celsius (°C) or Fahrenheit
(°F) and their maximum and minimum values. The
weather station also displays the time in 12/24-
hour clock modes and the date. In addition, the
weather station has an alarm function. The device
is not intended for commercial use.
Description of parts
and features
LC display
1Temperature trend (outdoor temperature)
2Outdoor temperature
3symbol (outdoor sensor)
4MAX- /MIN display for indoor temperature
5Temperature trend (indoor temperature)
6Indoor temperature
7symbol (weather station)
8Time
9ZZsymbol (snooze function)
10 Seconds display
11 symbol
12 Day of the week display
13 Date display (day/ month)
14 DST display (summer time)
15 / symbol (Alarm 1/Alarm 2)
16 2nd time zone (ZONE)
17 MAX- /MIN display (outdoor temperature)
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 7 30.08.13 08:34

8 GB
Weather station
18 ZZ/REGISTER button (snooze function/
REGISTER)
19 SELECT button
20 SET/ RESET button
21 ALARM button
22 CLOCK button
23 Hanging slot
24 Battery compartment
25 Stand
26 Screw (ø 2.5mm)
27 Dowel (ø 6mm)
Outdoor sensor
28 Control LED
29 Hanging slot
30 Battery compartment
31 Screw (ø 2.5mm)
32 Dowel (ø 6mm)
Technical data
Weather station:
Temperature
measurement range: 0– + 50°C
+32– +122 °F
Note: If the temperature is ≤0°C (32°F), the
LC display shows “LL.L”. If the temperature is
≥50°C (122°F), the LC display shows “HH.H”.
Temperature interval: 0.1°C
Radio signal: DCF
Batteries: 2 x AA 1.
5V
(included)
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 8 30.08.13 08:34

9GB
Outdoor sensor:
Temperature
measurement range: –20°C – +60°C
–4°F – +140°F
Note: If the temperature is ≤–20°C (–4°F),
the LC display shows “LL.L”. If the temperature is
≥60°C (140°F), the LC display shows “HH.H”.
HF transmission signal: 433 MHz
HF transmission range: max. 30 metres
(in open area)
Batteries: 2 x AA 1.
5V
(included)
Safety
YOU SHOULD STORE ALL SAFETY
INFORMATION AND INSTRUC-
TIONS IN A SAFE PLACE IN
CASE YOU NEED TO REFER TO
THEM AGAIN IN THE FUTURE!
General safety
information
This appliance can be used by
children aged from 8 years and
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 9 30.08.13 08:34

10 GB
above and persons with reduced
physical, sensory or mental ca-
pabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
Do not expose the device to an
extremely high electromagnetic
field. This may impair the correct
functioning of the device.
Please note that the guarantee
does not cover damage caused
by incorrect handling, non-com-
pliance with the operating in-
structions or interference with
the device by unauthorised in-
dividuals.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 10 30.08.13 08:34

11GB
Safety instructions
for batteries
DANGER TO
LIFE! Batteries can be swal-
lowed, which may represent a
danger to life. If a battery has
been swallowed, medical help
is required immediately.
Remove the batteries from the
device if they are not going to
be used for a prolonged period.
CAUTION! DANGER
OF EXPLOSION!
Never recharge batteries which
are not rechargeable.
When inserting the batteries, en-
sure the correct polarity! This is
shown in the battery compart-
ments.
Remove spent batteries immedi-
ately from the device. There is
an increased danger of leaks!
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 11 30.08.13 08:34

12 GB
Keep batteries away from chil-
dren do not throw the batteries
in the fire, short-circuit them or
take them apart.
Always replace all the batteries
at once.
Use batteries of the same type
only. Otherwise there is a risk
of an explosion.
If the batteries have leaked inside
your device, you should remove
them immediately in order to
prevent damage to the device!
Avoid contact with the skin, eyes
and mucous membranes. Any
parts of the body coming into
contact with battery acid should
be rinsed off with copious am-
ounts of water and/or a doctor
contacted if necessary!
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 12 30.08.13 08:34

13GB
Before initial use
Put the batteries first into the outdoor
sensor, then into the weather station.
General information
CAUTION! When choosing where to position
the weather station,
make sure that it is not exposed
to direct sunlight, vibrations, dust, heat, cold or
moisture. Do not place the weather station or exter-
nal sensor near to heat sources, e.g. radiators, as
this may result in damage to the instruments.
Place the weather station on the accompany-
ing stand 25.
Please ensure that neighbouring devices are
not operated at the same frequency of
433MHz. Such devices may cause interfer-
ence to the radio connection.
Do not place the devices next to or on metal
plates. Otherwise the quality of radio wave
transmission may be reduced.
Radio signal (DCF):
The DCF signal (time signal transmitter) is made
up of time pulses transmitted from one of the high-
est precision clocks in the world close to Frankfurt/
Main in Germany – it varies by 1 second in 1mil-
lion years.
In ideal conditions, your weather station can pick
up this signal over a distance of up to approx.
1,500km around Frankfurt/Main.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 13 30.08.13 08:34

14 GB
Preparing to use
the outdoor sensor
Inserting the batteries:
Remove the battery compartment cover from
the back of the outdoor sensor.
Insert two 1. 5V batteries (AA) (included)
into the battery compartment 30 .
Note: Make sure you fit the batteries the
right way round (polarity). This is shown in the
battery compartment (see. fig E).
The outdoor sensor is now ready for use and
the control LED 28 illuminates briefly.
Close the battery compartment cover.
If this does not work, carry out a restart, if
necessary. To do this, press and keep pressed
the ZZ/REGISTER button 18 .
Preparing the weather
station for use
Inserting the batteries:
Open the battery compartment 24 on the
back of the weather station.
Insert two 1. 5V batteries (AA) (included)
into the battery compartment.
Note: Make sure you fit the batteries the
right way round (polarity). This is shown on
the battery compartment (see. fig E).
Close the battery compartment cover.
Connecting the weather station with the
outdoor sensor and the DCF radio signal:
After the batteries have been inserted, the
weather station attempts to establish a connection
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 14 30.08.13 08:34

15GB
with the outdoor sensor. This process can take a
few minutes. The symbol flashes. Once the de-
vice has successfully connected to the external
sensor, the symbol stops flashing and the tem-
perature is shown in the LC display.
Note: If the weather station does not receive the
signal from the outdoor sensor within 3 minutes,
the weather station automatically starts with the
reception of the radio time signal.
After successful reception of the outdoor sensor
signal or after 3 minutes, the weather station starts
with the reception of the radio time signal. This
process can take up to 5 minutes and is indicated
in the LC display by the flashing symbol 11 .
After successful reception of the DCF radio signal,
the symbol is displayed continuously in the
LC display.
Note: Do not move the weather station while it is
receiving the signal. Otherwise this could interfere
with reception.If synchronisation is not possible
when the weather station is being first set up, try
changing the location (e.g. place the weather sta-
tion near to a window).
Reception may be considerably reduced by obstruc-
tions (e.g. concrete walls) or sources of interference
(e.g. other electrical devices).
If the reception of the radio signal continues to be
interrupted, you can set the time and date manu-
ally (see “Setting the language/time zone/time/
date manually”).
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 15 30.08.13 08:34

16 GB
Mounting the weather station and/ or
the outdoor sensor on a wall:
Note: You will require an electric drill and a
crosshead screwdriver for this step.
CAUTION! DANGER TO LIFE, RISK OF
INJURY AND MATERIAL DAMAGE! Read
the operating and safety instructions for your drill
carefully.
DANGER TO LIFE! Take care
that you do not hit electricity, gas or water lines
when you drill into the wall. If necessary, check
with a pipe and cable detector before drilling.
Weather station
Mark the position of the hole (ø approx. 6mm)
on the wall.
Drill the hole with an electric drill.
Insert the dowel 27 into the drilled hole.
Using a crosshead screwdriver, screw the
screw 26 into the dowel.
Hang the weather station by placing the
hanger 23 on the screw.
External sensor
Mark the position of the hole (ø approx. 6mm)
on the wall.
Drill the hole with an electric drill.
Insert the dowel 32 into the drilled hole.
Using a crosshead screwdriver, screw the
screw 31 into the dowel.
Hang the external sensor by placing the
hanger 29 on the screw.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 16 30.08.13 08:34

17GB
Note: Ensure that the external sensor does not
come into contact with water or direct sunlight.
Electronic devices may adversely affect the wire-
less signal reception.
Setting the language/time
zone/time/date manually
The reception of DCF radio signal where the
weather station has been positioned may become
degraded or interrupted. If this happens you can
set the device manually.
1. Press and hold down the CLOCK button 22
for about 3 seconds.
2. Press the SET/RESET button 20 to switch be-
tween the 12- and 24-hour clock display modes.
3. Press the CLOCK button to confirm your set-
tings. The day of the week display 12 flashes.
Tip: If you press and hold down the SET/
RESET button, you accelerate the process and
reach the desired value more quickly. This
quicker method can also be used for making
the following settings. If during a period of
30seconds no buttons are pressed, the LC
display returns automatically to the default
display.
4. Press the SET/RESET button to set the desired
language (GE = German, FR = French,
SP = Spanish, IT = Italian, EN = English).
5. Press the CLOCK button to confirm your set-
tings. The time zone display flashes.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 17 30.08.13 08:34

18 GB
6. Press the SET/RESET button to set the desired
time zone for time zone 2 (–12 hours to
+12hours).
Note: Should you be in a country in which
the DCF signal can be received but the time
is different to your current local time, you can
use the time zone setting to have the clock
display your current local time. If you find
yourself in a country in which, for example,
the local time is an hour ahead of Central
European Time (CET), you set the time zone
to +01. The clock is now still controlled by
DCF but shows the time as one hour ahead
of CET. If you wish to know what the time is in
the USA for example, then simply by setting
the time zone value to e.g. –10 you will ob-
tain the current local time in Los Angeles etc.
7. Press the CLOCK button to confirm your settings.
The hour display flashes.
8. Press the SET/RESET button to set the desired
value.
9. Press the CLOCK button to confirm your settings.
10. Repeat steps 6 and 7 to set the values for,
minutes, seconds 10 , year and date 13 (day/
month).
Note: The seconds display can only be
reset to 00.
11. After this, the LC display returns to the default
display.
Displaying summer time
Summer time is indicated by the DST symbol 14
in the LC display. The weather station
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 18 30.08.13 08:34

19GB
automatically detects from the DCF radio signal
whether it is summer time or not.
Calling up the time zone
The default display shows the time zone according
to the information provided by the DCF signal.
Press the CLOCK button 22 . The time zone 16
appears in the LC display.
Press the CLOCK button again to return to the
default display.
Setting the alarm time
You can set two different alarm times.
1. Press and hold down the ALARM button 21
for about 3 seconds.
Note: If an alarm time has been set before,
then that previously set alarm time appears in
the LC display. If not, then the display shows
0:00 or AM 12:00.
2. The hour display flashes. Press the SET/
RESET button 20 to set the desired value.
3. Press the ALARM button to confirm your
settings. The minute display flashes.
4. Press the SET/RESET button to set the desired
value.
5. Press the ALARM button to confirm your
settings.
6. Repeat steps 2 to 5 to set the time for Alarm 2.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 19 30.08.13 08:34

20 GB
Calling up the alarm times
Press ALARM button 21 once or twice to
call up the set time for Alarm 1 or Alarm 2
respectively.
Press the ALARM button again to return to the
default display.
Switching the alarm on/off
Press the SET/RESET button 20 once to acti-
vate Alarm 1. Press the SET/RESET button
twice to activate Alarm 2. Press the SET/
RESET button three times to activate Alarm1
and Alarm 2.
Note: The symbol or appears in the
LC display.
The alarm signal sounds as soon as the set
alarm time is reached. The alarm signal ceases
automatically after a period of 2minutes.
Press the ALARM button 21 to switch off the
alarm signal before it switches off automati-
cally.
Note: The alarm signal sounds every day at
the set time.
Press the SET/RESET button three times to
deactivate Alarm 1. Press the SET/RESET
button twice to deactivate Alarm 2. Press the
SET/ RESET button once to deactivate Alarm
1 and Alarm 2.
Using the snooze button
Press the ZZ/REGISTER button 18 while the
alarm signal is sounding to activate the snooze
function.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 20 30.08.13 08:34