Aus Electronics Direct HDCN0053M1 User manual

User Manual
4K HD-Video Capture
Model No. HDCN0053M1

FEATURES OF THE INTERFACE:
Picture 1.0 front panel showing
Picture 1.1 rear panel showing
HDMI Input port
Connect to the source with one HDMI cable
HDMI Output port
Connect to display device/TV with one HDMI cable
DC auxiliary power supply jack
Headphone / headset jack
Microphone in jack
External analog audio input jack (Line in)
USB Device interface
Connect to your PC with one USB3.0 cable
Power: Power indicator
Signal: Signal Status indicator

Connection and Operation:
1. Connection diagram
2. Matters needing attention:
Ⅰ. This product does not require an external power supply when connected to the standard USB3.0 interface
(which can provide 1A current) of the computer. If connected to the USB2.0 interface of the computer or other
conditions of insufficient power supply, must be connected to an external power auxiliary power supply, Auxiliary
power must be supplied by the attached USB-DC3.5 cable at this point.
Ⅱ.When the audio cable is inserted into the analog audio input port, USB output audio will give priority to analog
input audio. If no audio input from the analog audio input port, the HDMI input audio will be selected.
Ⅲ. This product supports mobile phone headset access, and the type of headset plug supported is 3.5mm plug of
international standard (CTIA).
Video Player
HD camera
HDMI Cable
Portable Equipment
Game Machine
PC
HDMI Input
HDMI Output
HDMI Cable
USB-DC3.5 power cable
USB Power
Headphone Output / MIC Input
MIC Input
Analog audio input
USB Output
3.5mm Headphone
/ Headset
Microphone
Audio device
Capturer

3. PC side hardware configuration requirements
Hardware devices
Recommended configuration
CPU
PC i5-3400 or above
NB i7-3537U 2.0GHZ or above
Memory
DDR3 4G or above
Graphics card
PC NVIDIA GT630 or above
NB NVIDIA GT735M or above
Hard disk
500G or above，SSD recommended
4. PC side system & software requirements
Type
Recommended version
Operating System
Windows XP/7/8/10
Andriod5.0 or above
MacOS 10 or above
Installation-free drive under normal conditions
Application
Support most video capture software, such as PotPlayer, VLC,
OBS, Amcap etc.
Note：The software copyright belongs to the third party company. Please use the licensed software, otherwise
all the consequences caused are undertaken by its own users.
5. Operation illustration
Operation Steps for video capture (Win7 and OBS for PC).
Ⅰ. Insert the Capture into the USB port of the PC, Check device identification in Control Panel \ Device Manager
\ Image Devices list.

Ⅱ. Open the OBS software and click the【+】button in the "Sources" control panel to add a video capture device.
Ⅲ. Select the capture device to preview the capture screen normally. Then click 【OK】.
HDSW0031M1

Ⅳ.Drag the red border to adjust the capture screen size.
Ⅴ. Click 【Settings】button in the lower right corner to enter the setting interface to set audio & video format,
picture quality, output etc. After setting, click 【Start Recording】button.

SPECIFICATIONS:
Model No.
HDCN0053M1
Model name
4K HD-Video Capture
Input ports
HDMI2.0 x1,LINE IN x1,MIC x1,DC3.5 x1
Output ports
HDMI2.0 x1,USB3.0 x1, Headset x1
HDMI video resolution
720P/1080P/2160P@24/30/50/60Hz
Audio format
LPCM2.0/32~192KHz/16/20/24Bit
Input color space
RGB、YUV444、YUV422、YUV420
Video output resolution
1920x1080@30Hz Max.
Video output format
YUV or JPEG
HDMI input cable length
2160P/AWG 26 ≤5m or1080P/AWG 26 ≤10m
HDMI output cable length
2160P/AWG 26 ≤5m or1080P/AWG 26 ≤10m
Power supply mode
USB power supply / DC5V auxiliary power supply
Max working current
600mA
Working temperature range
-5 ~ +40℃
Working humidity range
5 to 85%RH（No Condensation）
Storage temperature
-15 to 55℃
Storage humidity
5 ~95%RH(No Condensation)
Size
67*26*13 (mm)
Weight
79g
Accessories
Manual x1, USB-DC3.5 power cable x1, 3.5mm audio cable x1，
USB3.0(Type A) cable x1