Aus Electronics Direct AA6000 User manual

Digital to Analog
Audio Decoder
USER Manual

2
Table of Contents
1.0 Introduction
2.0 Specifications
3.0 Package Contents
4.0 Panel Descriptions
5.0 Connection Diagram

3
1.0 Introduction
The Digital to Analog Audio Decoder features an integrated
24 bit audio DSP. This unit can decode a variety of digital
audio formats, including Dobly Digital (AC3), DTS and PCM.
It can simply connect an Optical (Toslink) or Digital Coaxial
Cable to the input, then the decoded audio can be transmitted
as 2 channel analog audio via the Stereo RCA output or the
3.5mm output (suitable for headphones) simultaneously.
1.1 Features
1.Decode Dolby Digital (AC3), DTS or PCM digital audio to
stereo audio output.
2.Support PCM 32KHz.44.1KHz,48KHz,96KHz sample

4
frequency audio decode.
3.Support Dolby Digital 5.1 samples ,DTS-ES6.1 samples
audio decode.
4.No need to install drivers. Portable, flexible, plug and play.
2.0 SPECIFICATIONS
Input Ports: 1 x Optical (Toslink), 1 x Digital Coaxial.
Output Ports: 1 x RCA (L/R), 1 x 3.5mm (Headphone).
Signal to Noise Ratio:120db.
Degree of Separation: 85db.
Frequency Response: (20Hz ~ 20KHz) +/- 0.5db.
Dimensions (mm): 72(D)x55(W)x20(H).
Weight (g): 40.

5
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging
and make sure the following items are contained in the
shipping carton:
1) Audio Decoder ---------------1PCS
2) 5V/1A DC Adaptor----------------------1PCS
3) User Manual. -------------------1PCS
4.0 PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar
with the signal input(s), output(s) and power requirements.

6
Back Panel: Top Panel: Front Panel
5.0 CONNECTION DIAGRAM
1. Connect a source such as a Blu-Ray Player, game
console, A/V Receiver, etc. to the audio Decoder SPDIF

7
input by fiber cable or Coaxial input by coaxial calbe.
2. Connect a headphone or analog audio amplifier to the
audio output on the Decoder.
3.Power on the Decoder and select the switch to your
need audio input port.