AUSTLEN ENTOURAGE SIT+STAND User manual

ENTOURAGETM SIT+STAND
User Manual
austlen.com

Warnings & Safety Information 2
Care & Maintenance 4
Parts List 5
Platform Rider Operation 6
Jump Seat Operation 7
READ THIS USER MANUAL CAREFULLY AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS
BEFORE USE. YOUR CHILD’S SAFETY MAY BE AT RISK IF YOU DO NOT FOLLOW THESE
INSTRUCTIONS.
KEEP THESE INSTRUCTIONS AND WARNINGS FOR FUTURE REFERENCE.
DO NOT allow anyone to use this product unless that person has read and fully understood
the warnings and instructions in this user manual prior to use.
TABLE OF CONTENTS

2
WARNINGS & SAFETY INFORMATION
WARNING
• NEVER LEAVE CHILD UNATTENDED!
• AVOID SERIOUS INJURY from falling or
sliding out. Always use jump seat harness.
• AVOID PINCHING AND ENTRAPMENT:
Do not fold or unfold stroller, or stow jump
seat when a child is in or near jump seat or
platform rider. Children and adults should
be clear of moving parts while installing and
removing jump seat or platform rider.
• DO NOT allow child to operate or play with
jump seat or platform rider.
• DO NOT place more than one child on jump
seat or platform rider. A MAXIMUM OF ONE
CHILD may be on the sit+stand at any time.
• DO NOT allow child to stand on jump seat.
• ALWAYS lock brake when not moving and
when making adjustments to jump seat or
platform rider.
• Adult supervision is required at all times
when child is on jump seat or platform
rider, as well as when child is mounting or
dismounting jump seat or platform rider.
• Use extra caution when operating stroller
on uneven surfaces (potholes, cracks, curbs,
park terrain, etc.) when child is on jump seat
or platform rider.
• DO NOT lift stroller by jump seat.
• DO NOT allow any product or accessory to
interfere with proper function of jump seat
harness.
• ALWAYS use stroller fenders when using
jump seat or platform rider.
• DO NOT use market tote, cargo bag, or rear
car seat adapter when child is on jump seat
or platform rider.
• DO NOT hang items from jump seat.
• DO NOT allow child to hang from stroller,
including stroller handles.
• Sit+Stand (jump seat and platform rider) is for
use for ONE child who is at least 2 1/2 years
old, has good balance and coordination, is not
over 45 in. (114.3 cm) tall and is less than 50 lbs.
(22.7 kg).
• DO NOT exceed manufacturer’s maximum
weight.
WEIGHT & HEIGHT RESTRICTIONS
• DO NOT use jump seat to carry cargo.
• Excessive weight in any area or a bag or
accessory hung from the jump seat could cause
a hazardous unstable condition to exist.

3
• Before using jump seat or platform rider, ENSURE
stroller is open and expanded, and all locking
devices are engaged.
• DO NOT make sharp turns with child on jump
seat or platform rider.
• Child MUST have BOTH feet placed firmly on
platform rider at all times while sitting on jump
seat or standing on platform rider.
• Child MUST always face rearward, hold on with
BOTH hands, and have harness securely fastened
when using jump seat.
• Child MUST always face forward and hold on with
BOTH hands to front frame handles when
on platform rider.
SAFETY INFORMATION
• Keep hands and feet clear of wheels at all times.
• Child MUST be wearing footwear at all times
when on platform rider.
• Platform rider must be attached at all times
when using jump seat.
• ALWAYS place jump seat in stowed position
prior to folding stroller.
• Keep all fabric and/or fabric parts away from
any sources of ignition or open flame.
• Use caution when platform rider is wet or
covered with any debris to prevent child
from slipping.
• Discontinue use of jump seat or platform rider
if either one malfunctions, becomes damaged
or any part is missing or broken.
• DO NOT make any alterations or modifications
to jump seat or platform rider with products
not supplied by manufacturer, as this may cause
instability or structural damage not covered by
the warranty.
• Use only replacement parts supplied or
provided by manufacturer.
• Dispose of plastic bags and packaging
immediately to avoid danger of suocation.
• This jump seat and platform rider are for use
only with AustlenTM EntourageTM strollers.
Two
Hands
Two
Hands

4
CARE & MAINTENANCE
Frame & Fabric Care
Jump seat fabric cover may be spot cleaned or
hand washed in cold water and laid flat to dry.
Dry away from direct sunlight and direct sources
of heat.
To remove jump seat fabric for washing:
STEP 1: Unzip cover and unfasten hook and loop
fasteners at front corner edges.
STEP 2: Thread harness straps through openings.
STEP 3: Remove cover.
To reattach, reverse removal steps.
Harness and jump seat frame may be spot cleaned
with water and a mild detergent.
Platform rider may be wiped down with water and
a mild detergent that does not leave any residue.
Do not use abrasives.
Do not disassemble jump seat when cleaning.
If exposed to salt water, wipe down with fresh (tap)
water as soon as possible to avoid corrosion.
Do not use pressurized water to clean.
Always dry thoroughly before storing, and do not
store in a damp environment or near a direct heat
source (fire, radiator, etc.).
Maintenance & Repair
Inspect your EntourageTM Sit+Stand periodically.
Never use a product that is structurally unsound
or in need of repair. This product requires regular
user maintenance. Regularly check all connecting
hardware (rivets, screws, etc.) for tightness and
security. Check all safety devices, locks and
harnesses for correct and secure operation.
Replace worn or broken parts as needed. Only
AustlenTM Baby Co. replacement parts should be
used. It may be unsafe to use parts supplied by
another manufacturer.

5
Parts List
Jump Seat
Cover
Platform
Rider
Arm Rests
Attachment
Notches
Harness

6
Platform Rider Operation
Platform Rider Installation
TO INSTALL PLATFORM RIDER:
STEP 1: At rear of stroller,
unfasten rear fabric panel and
push forward to make way for
platform rider.
STEP 2: Holding platform rider at an angle, maneuver notches on one
side around lower portion of rear frame.
Lower opposite side and press down to snap into place.
Fasten bottom strip of rear fabric panel to front edge of platform
rider.
TO REMOVE PLATFORM RIDER: Reverse steps 1 and 2.
1
1

7
TO INSTALL JUMP SEAT: Expand stroller to
intermediate or fully expanded position. Refer to
EntourageTM User Manual for instructions.
STEP 1: With jump seat in folded position, hold
seat vertically just in front of rear frame. Align
attachment notches on jump seat to hubs on
rear stroller frame. Slide seat down and back
until jump seat clicks into place.
STEP 2: Ensure upper notches secure to rear
frame on left and right sides. Jump seat is now
attached and in its stowed position.
TO REMOVE JUMP SEAT: Ensure jump seat is
in stowed position.
STEP 1: Locate strap on underside of jump seat
inside fabric opening. Pull strap up vertically to
release seat from stroller frame.
STEP 2: Lift seat upward.
2
1
Jump Seat Use
Jump Seat Installation
1
2
1
Jump Seat Operation
1
2
TO DEPLOY JUMP SEAT:
Lift lever on underside of seat
and lower seat until it locks into
place.
TO STOW JUMP SEAT:
Lift lever and move seat into a
vertical position until it locks
into place.
Always lock brake when stroller is not moving and when making
adjustments.
WARNING
2

8
TO ADJUST LENGTH of waist
straps: Pull each strap through
slide adjuster and press button
to release strap for lengthening.
Jump Seat Operation
Jump seat is equipped with
a three-point harness.
TO LOCK: click ends of waist
buckles into crotch buckle.
Harness Operation
1
3
4Harness Adjustment
AVOID SERIOUS INJURY from falling out. Always use seat
harness.
2
1 1
2
TO UNLOCK: Press button in
center of crotch buckle to release
and pull waist buckles out.
5Stroller Fold With Sit+Stand
21
Stroller will fold with both
jump seat and platform rider
attached. Jump seat must be
in stowed position and stroller
must be fully retracted prior to
folding.
Refer to EntourageTM User
Manual for folding instructions.
WARNING
AVOID PINCHING AND ENTRAPMENT: Children and adults
should be clear of moving parts while folding and unfolding
stroller.
WARNING

Model SA-STST-BK
Manual P7200 version 1.0
All rights reserved. © 2016 AustlenTM Baby Co. Austlen, Entourage, and all associated logos are trademarks.
All product specifications are correct at time of print. Austlen Baby Co. reserves the right to alter parts that will not aect
product functionality.
Austlen Baby Co.
P.O. Box 49589
Austin, TX 78765
844.AUSTLEN
[e-mail]
austlen.com
SUPPORT & CONTACT INFORMATION