AUSTRALIAN MONITOR AMHEAVYG User manual

IMPORTANT SAFETY INFORMATION
INSTRUCTION MANUAL
AMHEAVYG
HEAVY-DUTY GOOSENECK MICROPHONE
Thank you for purchasing this quality Australian Monitor product.
The AMHEAVYG is a heavy-duty, gooseneck microphone designed
specifically for continuous high usage in commercial environments.
The heavy-duty gooseneck and dynamic capsule provide dependable
reliability which ensures years of reliable operation. Featuring a
momentary switch, the AMHEAVYG is also capable of providing dry
contact closure to trigger pre-announce tone generators.
The AMHEAVYG is the ideal solution for PA paging scenarios such
as supermarkets, service stations, fast food outlets and many other
demanding commercial environments.
What’s in the box?
1 x AMHEAVYG gooseneck microphone
1 x instruction manual
Features
Tailored for PA paging announcements
Momentary dry contact switch
Heavy-duty gooseneck
Heavy-duty dynamic capsule
1. Read and Keep these instructions. Do not throw them away.
2. Heed all warnings.
3. Follow all instructions.
4. This equipment is not suitable for use in locations where children are likely to be present.
5. Only use indoors. Do not use outdoors.
6. Only operate this equipment at an altitude of less than 2000km above sea level.
7. Install the product on a stable surface or secured in a rack.
8. Do not install near any heat sources such as radiators or other apparatus that produce heat.
9. Do not block or insert objects into any ventilation openings.
10. The mains plug is used as the disconnection device; it should remain readily accessible at all times.
11. If this equipment has a protective earth terminal, it must be connected to a mains outlet with
a protective earth connection.
12. Touching speaker terminals while operational may result in an unpleasant sensation.
13. Never expose the equipment to mechanical stress. Dropping the device from any height
may damage this equipment.
14. This equipment should not be exposed to dripping or splashing water. No object filled
with liquid, such as vases, should be placed on the equipment.
15. Only use attachments/accessories specified by the manufacturer.
16. Unplug this apparatus during lightning storms or when unused for long periods of time.
17. Refer all servicing to qualified service personnel.
Rating plate and caution marking are marked on the back enclosure of the apparatus.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT
CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
The lightning flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user to
the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may
be of sufficient magnitude to
constitute a risk of electric
shock to persons.
WARNING
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point
within an equilateral
triangle is intended to alert
the user to the presence
of important operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.
For European Union countries: This symbol on the
product or its packaging indicates that this product
must not be disposed of with other waste.
Instead, it is your responsibility to dispose of your
waste equipment by handing it over to a designated
collection point for the recycling of waste electrical
and electronic equipment.
Please contact your local authority for further details
of your nearest designated collection point.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT AND FULLY INSERT.
WARNING
CAUTION
ENGINEERED BY AUSTRALIAN MONITOR
Address: Unit 1, 2 Daydream Street, Warriewood NSW 2102 Australia
Website: www.australianmonitor.com.au
International enquiries email: [e-mail]
ABN 86 003 231 187

Installing your microphone
1Choose a suitable flat surface to install the microphone.
2Using a drill or spade bit drill a 5mm hole in the surface to run the cable through.
3Using a maker or punch, mark the position of the three holes in the microphone base.
4Using suitable fasteners secure the microphone in place.
Wiring your microphone
The AMHEAVYG is shipped with an unterminated 5 wire cable. This allows the installer to customise
the connection type between the AMHEAVYG and device input.
The AM HEAVY provides a balanced microphone output signal. It also provides a normally open
(N/O) dry contact closure output from the momentary switch allowing connection to third party
devices such as a pre-announce tone generator.
Please follow the table below for successful wiring and operation of your microphone.
Audio Wiring Termination Switch Wiring Termination
INSTALLING YOUR AMHEAVYG MICROPHONE
Red wire Audio Positive (+)
Black wire Audio Negative (-)
Drain / Shield Audio Ground
Green wire Switch
White wire Switch
(Normally Open N/O)
Base Plate
Dimensions
586mm
15mm
70mm
Typical Polar
Patterns
Typical Frequency
Response
Specifications