AUSTRALIAN MONITOR XR10P User manual

Built-in crossover two way full range active speaker
10"x1(Bass)
55Hz-18KHz
50Hz-18KHz
117dB
100W(Bass)+50W(Treb)
Line-0.02%, Microphone-0.04%
Treb - 8Ohm, Bass - 8 Ohm
Line - 20KOhm, Microphone - 10KOhm
XLR K3P
325X308 mmX478
375X355X535mm
10.5Kg
11.8Kg
1 x 34mm Driver
System:
Driver Quantity:
90 X60
Tweeter Dispersion(HxV):
Frequency Response(-3dB):
Frequency Response(-10dB):
Max Sound Level(dB/1M):
Output Power:
Distortion:
Load Impedance:
Input Impedance:
Connectors:
Power Supply:
Dimensions(WxDxH mm/pcs):
Packing Dimensions(WxDxH mm/pcs)
Net Weight(Kg/pcs):
Gross Weight(Kg/pcs):
Level Adjust Range: 12dB(100Hz)- Bass
10dB(10KHz)- Treb
AC 115V/230V, 50/60Hz
Features:
XR10P
Technical Specifications
Model: XR10P
XR10P
Two-way active speaker with one 10” woofer and
one 1” driver.
Cabinet is made tech from polypropylene and
special high-tech material. It’s durable, anti-shock
and has good damping characters.
Voice coil in the 10” woofer is made from 50mm
copper cladding aluminium ribbon wire.
Heavy duty protective grille.
Rotatable 90° x 60° (HxV) dispersion horn makes
it suitable for any performance purposes.
Molded-in pole mount, easily suspended.
Arrayable vertically in 4 layers or horizontally in
more than 8 columns.
POWERED SPEAKER SYSTEM
SYDNEY (NSW & ACT SALES)
Phone: [phone]
Email: [e-mail]
MELBOURNE (VIC & TAS SALES)
Phone: [phone]
Email: [email protected]
BRISBANE (QLD SALES)
Phone: [phone]
Email: [email protected]
.au
ADELAIDE (SA & NT SALES)
Phone: [phone]
Email: [email protected]
PERTH (WA SALES)
Phone: [phone]
Email: [e-mail]
AUCKLAND (NZ SALES)
Phone: [phone]
Email: [email protected].nz
www.australianmonitor.com.au
Distributed by Audio Telex Communications Pty Ltd
ABN 78001345482 Incorporated in NSW
www.audiotelex.com.au
EUROPE/ASIA/MIDDLE EAST
Phone: [phone]
Email: interna[email protected]

1. Volume control.
2. Clip indicator.
3. Line input signal presence indicator.
4. Line/microphone selector.
5. Power supply input. Make sure that the
voltage selector is set for your country’s
correct voltage.
6. 115V/230V voltage input selector.
Make sure that the voltage selector is
set for your country’s correct voltage.
7. Bass control.
8. Treble control.
9. Microphone input signal presence
indicator.
10. Line/microphone output.
(Direct connection to input)
11. Line/microphone input.
12. Protection fuse. Use only fuses of a
2.5 Amp rating.
13. Power ON/OFF switch.
XR10P
POWERED SPEAKER SYSTEM
No:
MadeinChina
INPUT THRU
XR10P