AUSTRALIAN MONITOR XR12P User manual

Built-in crossover two way full range active speaker
12"x1(Bass) 1 x 44mm Driver
50Hz-18KHz
40Hz-20KHz
118dB
12dB(100Hz)-Bass 10dB(10KHz)-Treb
300W(Bass)+100W(Treb)
Line-0.02%, Microphone-0.04%
Treb - 8Ohm, Bass - 8 Ohm
Line - 20KOhm, Microphone - 10KOhm
XLR K3P
AC 115/230V, 50/60Hz
415X391 mmX600
465X435X680mm
23Kg
25.2Kg
System:
Driver Quantity:
Frequency Response(-3dB):
Frequency Response(-10dB):
Max Sound Level(dB/1M):
Level Adjust range:
Output power:
Distortion:
Load impedance:
Input impedance:
Connectors:
Power supply:
Dimensions(WxDxH mm/pcs):
Packing Dimensions(WxDxH mm/pcs)
Net Weight(Kg/pcs):
Gross Weight(Kg/pcs):
Rotatable horn(HxV): 00
50-100 x55
XR12P
XR12P
POWERED SPEAKER SYSTEM
SYDNEY (NSW & ACT SALES)
Phone: [phone]
Email: [e-mail]
MELBOURNE (VIC & TAS SALES)
Phone: [phone]
Email: [email protected]
BRISBANE (QLD SALES)
Phone: [phone]
Email: [email protected]
.au
ADELAIDE (SA & NT SALES)
Phone: [phone]
Email: [email protected]
PERTH (WA SALES)
Phone: [phone]
Email: [e-mail]
AUCKLAND (NZ SALES)
Phone: [phone]
Email: [email protected].nz
www.australianmonitor.com.au
Distributed by Audio Telex Communications Pty Ltd
ABN 78001345482 Incorporated in NSW
www.audiotelex.com.au
EUROPE/ASIA/MIDDLE EAST
Phone: [phone]
Email: interna[email protected]
Features:
Technical Specifications
Model: XR12P
Two-way active speaker with one 12” woofer
and one 2” driver.
Cabinet is made from polypropylene and special
high-tech material. It’s durable, anti-shock and
has good damping characters.
Voice coil in the 12” woofer is made from 75mm
copper cladding aluminium ribbon wire.
Heavy duty protective grille.
Rotatable 50-100°x55° (HxV) dispersion horn makes
it suitable for any performance purposes.
Molded-in pole mount, easily suspended.
Vertical or horizontal layout, can be used as
a monitor or in any flying systems.
Arrayable vertically in 4 layers or horizontally
in more than 8 columns.

1. Volume control.
2. Clip indicator.
3. Microphone input signal presence indicator.
4. Line input signal presence indicator.
5. Line/microphone selector.
6. 115V/230V voltage input selector.
Make sure that the voltage selector is
set for your country’s correct voltage.
7. Power ON/OFF switch.
8. Bass control.
9. Treble control.
10. Line/microphone output.
(Direct connection to input)
11. Line/microphone input.
12. Power supply input. Make sure that the
voltage selector is set for your country’s
correct voltage.
13. Protection fuse. Use only fuses of
a 5 Amp rating.
XR12P
POWERED SPEAKER SYSTEM
No:
THRUINPUT
Made in China
2
3
4
5
7
8
9
10
11
12
13
6
XR12P