Autel MaxiTPMS TBE200 User manual

i
Trademarks
Autel®, MaxiSys®, MaxiDAS®, MaxiScan®, MaxiTPMS®, MaxiRecorder®, and
MaxiCheck®are trademarks of Autel Intelligent Technology Corp., Ltd.,
registered in China, the United States, and other countries. All other marks are
trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise without the prior written permission of
Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications, and illustrations in this manual are based on the
latest information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While
information of this manual has been carefully checked for accuracy, no
guarantee is given for the completeness and correctness of the contents,
including but not limited to the product specifications, functions, and
illustrations.
Autel will not be liable for any direct, special, incidental, nor indirect damages,
nor any economic consequential damages (including the loss of profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully,
paying extra attention to the safety warnings and precautions.
For Services and Support
pro.autel.com
www.autel.com
www.maxitpms.com

ii
1-855-288-3587/1-855-AUTELUS (North America)
[email protected]
For technical assistance in all other markets, please contact your local
distributor.

iii
Safety Information
For your own safety and the safety of others, and to prevent damage to the
device and vehicles upon which it is used, it is important that the safety
instructions presented throughout this manual be read and understood by all
persons operating or coming into contact with the device.
There are various procedures, techniques, tools, and parts for servicing
vehicles, as well as in the skill of the person doing the work. Because of the
vast number of test applications and variations in the products that can be
tested with this equipment, we cannot possibly anticipate or provide advice
or safety messages to cover every circumstance. It is the automotive
technician’s responsibility to be knowledgeable of the system being tested. It
is crucial to use proper service methods and test procedures. It is essential
to perform tests in an appropriate and acceptable manner that does not
endanger your safety, the safety of others in the work area, the device being
used, or the vehicle being tested.
Before using the device, always refer to and follow the safety messages and
applicable test procedures provided by the manufacturer of the vehicle or
equipment being tested. Use the device only as described in this manual.
Read, understand, and follow all safety messages and instructions in this
manual.
Safety Messages
Safety messages are provided to help prevent personal injury and equipment
damage. All safety messages are introduced by a signal word indicating the
hazard level.
DANGER
Indicates an imminently hazardous situation that, if not avoided, will result in
death or serious injury to the operator or to bystanders.
WARNING
Indicates a potentially hazardous situation that, if not avoided, could result in
death or serious injury to the operator or to bystanders.

iv
Safety Instructions
The safety messages herein cover situations Autel is aware of. Autel cannot
know, evaluate or advise you of all possible hazards. You must be certain
that any condition or service procedure encountered does not jeopardize your
personal safety.
DANGER
When an engine is operating, keep the service area WELL VENTILATED or
attach a building exhaust removal system to the engine exhaust system.
Engines produce carbon monoxide, an odorless, poisonous gas that causes
slower reaction time and can lead to serious personal injury or loss of life.
SAFETY WARNINGS
Always perform automotive testing in a safe environment.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment away from all moving or
hot engine parts.
Operate the vehicle in a well-ventilated work area, for exhaust gases are
poisonous.
Put the transmission in PARK (for automatic transmission) or NEUTRAL
(for manual transmission) and make sure the parking brake is engaged.
Put blocks in front of the drive wheels and never leave the vehicle
unattended while testing.
Be extra cautious when working around the ignition coil, distributor cap,
ignition wires and spark plugs. These components create hazardous
voltages when the engine is running.
Keep a fire extinguisher suitable for gasoline, chemical, and electrical
fires nearby.
Do not connect or disconnect any test equipment while the ignition is on
or the engine is running.
Keep the test equipment dry, clean, free from oil, water or grease. Use a
mild detergent on a clean cloth to clean the outside of the equipment as
necessary.
Do not drive the vehicle and operate the test equipment at thesame time.

v
Any distraction may cause an accident.
Refer to the service manual for the vehicle being serviced and adhere to
all diagnostic procedures and precautions. Failure to do so may result in
personal injury or damage to the test equipment.
To avoid damaging the test equipment or generating false data, make
sure the vehicle battery is fullycharged and the connection to the vehicle
DLC is clean and secure.
Do not place the test equipment on the distributor of the vehicle. Strong
electro-magnetic interference can damage the equipment.

vi
CONTENTS
SAFETY INFORMATION.....................................................................................III
SAFETY MESSAGES ........................................................................................III
SAFETY INSTRUCTIONS....................................................................................IV
1 USING THIS MANUAL....................................................................................8
CONVENTIONS.................................................................................................8
2 GENERAL INTRODUCTION.........................................................................10
MAXITPMS TBE200 EXAMINER.....................................................................10
OTHER ACCESSORIES....................................................................................15
3 GETTING STARTED.....................................................................................16
3.1 POWER UP.............................................................................................16
4 TIRE TREAD CHECK....................................................................................19
4.1 CHECK MODES ........................................................................................20
4.2 DETAILS .................................................................................................21
5 BRAKE DISC CHECK...................................................................................23
5.1 CHECK MODE...........................................................................................24
5.2 DETAILS..................................................................................................24
6 QUICK CHECK..............................................................................................26
6.1 CHECK MODE...........................................................................................27
6.2 DETAILS..................................................................................................28
7 CHECK SETTINGS.......................................................................................29
NUMBER OF TIRES .........................................................................................29
UNIT.............................................................................................................29
TIRE TYPE ....................................................................................................29
TREAD CHECK MODE.....................................................................................30
BRAKE DISC WEAR LIMIT................................................................................30
8 DATA QUERY...............................................................................................31
9 SYSTEM CALIBRATION...............................................................................32
10 SETTINGS ..................................................................................................33
NETWORK CONNECTION .................................................................................33
BRIGHTNESS .................................................................................................33

vii
SLEEP ..........................................................................................................33
AUTOMATIC SHUTDOWN .................................................................................33
LANGUAGE AND REGION .................................................................................34
ABOUT..........................................................................................................34
UPDATE........................................................................................................34
RESTORE FACTORY SETTINGS........................................................................34
11 MAINTENANCE AND SERVICE.................................................................35
MAINTENANCE INSTRUCTIONS.........................................................................35
TROUBLESHOOTING CHECKLIST ......................................................................36
12 SERVICE PROCEDURES ..........................................................................37
13 COMPLIANCE INFORMATION...................................................................40
14 WARRANTY................................................................................................43
LIMITED ONE YEAR WARRANTY.......................................................................43

8
1Using This Manual
This manual contains device usage instructions.
Some illustrations shown in this manual may contain modules and optional
equipment that are not included in your system. Contact your sales
representative for availability of other modules and optional tools or
accessories.
Conventions
The following conventions are used:
Bold Text
Bold text is used to highlight selectable items such as buttons and menu
options.
Tap OK.
Notes and Important Messages
Notes
A NOTE provides helpful information such as additional explanations, tips,
and comments.
NOTE
New batteries reach full capacity after approximately 3 to 5 charging and
discharging cycles.
Important
IMPORTANT indicates a situation that, if not avoided, may result in damage
to the test equipment or vehicle.

9
IMPORTANT
Keep the cable away from heat, oil, sharp edges, and moving parts. Replace
damaged cables immediately.
Hyperlink
Hyperlinks or links that take you to other related articles, procedures, and
illustrations are active in electronic documents. Blue italic text indicates a
selectable hyperlink and blue underlined text indicates a website link or an
email address link.
Illustrations
Illustrations used in this manual are examples; actual testing screens may
vary for each vehicle being tested. Carefully observe the menu titles and on-
screen instructions to make the right selections.

10
2General Introduction
The Autel MaxiTPMS TBE200 Examiner (hereinafter referred to as “the tool”)
is a laser-enabled tire & brake disc-wear examination tool that provides users
with quick and accurate tire-wear measurements along with the ability to
measure brake disc wear without having to remove tires. The tool's dual
cameras enable users to document tire wear and damage as well as scan
Tire Identification Numbers (TINs). You can use the tool on its own or with a
compatible Autel diagnostics tablet, such as an ITS600/ITS600 Pro to view
and print detailed TPMS reports.
This manual describes the construction and operation of the tool and how it
works to test tire & brake disc wear.
MaxiTPMS TBE200 Examiner
Functional Description
Figure 2-1 Examiner Top View
1. USB Type C Rubber Plug
2. USB Type C Port

11
Figure 2-2 Examiner Front View
3. Power/Measure button —Press and hold this button for 3 seconds to
power the tool on and off; once on, press the button quickly to take
measurements.
4. 1.65-inch AMOLED Screen
Figure 2-3 Examiner Side View

12
5. Magnetic Head
Figure 2-4 Examiner Back View
6. Camera Flash
7. 8-megapixel Camera
8. Laser Diode
9. 1-megapixel Camera
Power Sources
The tool can receive power from any of the following sources:
Internal Battery Pack
AC/DC Power Supply
Internal Battery Pack
The tool can be powered by its internal rechargeable battery, which when
fully charged can provide sufficient power for about 8 hours of continuous
operation.
AC/DC Power Supply

13
The tablet can be powered from a wall socket using its AC/DC power supply.
The AC/DC power supply also charges the tool’s internal battery.
Technical Specifications
Table 0-1 Specifications
Item
Description
Product
Name
Tire & Brake Disc Examiner
Laser
Classification
Class 3R Laser Product
IEC 60825-1:2014
Optical Power
2.0 mW
Wave Length
At Peak
Emission
520 nM

14
Item
Description
Labelling
Processor
4xARM Cortex-A35 (1.5 GHz)
Memory
1GB RAM LPDDR3 & 4GB On-board Memory
Display
1.65-inch AMOLED capacitive touchscreen with 348x442
pixel resolution
Connectivity
Wi-Fi
USB 2.0, Type C
Micro-
cameras
CMOS WXGA, 1 megapixel & 8 megapixel, 30 fps
Audio Output
Output: beep

15
Item
Description
Power &
Battery
3.7 V/3000 mAh 18650 lithium-ion battery
Charges via 5 V AC/DC power supply
Tested
Battery Life
Around 8 hours of continuous use
Battery
Charging
Input
5 V/1.5 A
Power
Consumption
300 mA (AMOLED on with default brightness) @3.7 V
Operating
Temp.
−10 to 45°C (14 to 113°F)
Storage
Temp.
−20 to 60°C (−4 to 140°F)
Dimensions
(W x H x D)
283.0 mm (11.14”) x 39.0 mm (1.54”) x 33.5 mm (1.32”)
Net Weight
188 g (0.41 lb.)
Other Accessories
Table 0-2 Accessories
Power Adapter
Used with USB cable to power and charge the tool via
electrical outlet.
Type C USB Cable
Connect between the power adapter and the tool for
powering and charging.

16
3Getting Started
Ensure the tool is connected to the Internet and is sufficiently charged or
connected to a power outlet (See Power Sources on page 10). The
product should avoid the exposure of direct sunlight during the actual
operation of tire tread check and brake disc check.
3.1 Power Up
Press and hold the power button on the tool to switch it on. The system will
boot up and display the TBE200 Job Menu.
Figure 3-1 TBE200 Job Menu
①System Status Icons
②Application Buttons
③Locator
3.1.1 System Status Icons
As the MaxiTPMS TBE200 runs on the Android operating system, you may
refer to Android documents for additional information.

17
3.1.2 Application Buttons
The table below briefly describes each of the applications on the TBE200.
Table 3-1 Application Buttons
Button
Name
Description
Tire Tread
Accesses the tool’s tire-tread check function. See
Tire Tread Check on page 18 for details.
Brake Disc
Launches the brake disc wear measurement
function. See Brake Disc Check on page 22 for
details.
Quick
Check
Allows you to perform a quick check to measure
tire-tread depth & brake disc wear
measurements. See Quick Check on page 25 for
details.
Check
Settings
Adjusts settings for check sessions. See Check
Settings on page 28 for details.
Data
Query
Display data from previous measurements. See
Data Query on page 30 for details.
System
Calibration
Calibrates the measurement system. See System
Calibration on page 31 for details.
Settings
Accesses the System Settings menu. See
Settings on page 32 for details.

18
3.1.3 Locator
The Locator icon displays at the bottom of the TBE200 Jobs screen. Swipe
the screen left or right to view the previous or next screen.

19
4Tire Tread Check
Using laser technology, the Tire Tread application analyzes the wear of the
tires on vehicles with no need to remove the tires. Place the tool on the tire,
the tool projects a laser beam and the image will be captured by a 4cm macro-
lens camera.
The wear measurement is then sent to the display screen with an accuracy
within 0.1mm. Measurements are also displayed graphically.
The Tire Tread application provides two types of checks: “All Treads” and
“Single.”When using this application, a message will display prompting user
to choose between the current mode the alternative one. You can configure
your default check mode under Check Settings. Refer to Check Settings on
page 28 for additional information.
Figure 4-1 Tire Tread Check Screen
Degrees of tire wear are represented by different colors as displayed below:
Table 4-1 Possible Results for Measurements

20
Icon
Results
Description
(Gray)
Unchecked
The tire is unchecked.
(Green)
Normal
Please check regularly.
(Yellow)
Warning: wear
level is
approaching
critical value.
Recommend replacing.
(Red)
Danger: Severe
tire wear.
Replace immediately.
4.1 Check modes
There are two check modes available under the Tire Tread application:
Single Check
The Single Tire check measures the wear of each tire on the vehicle by
examining the tread depth in the center area of the tire only. Unlike the All