AuthenTeak Kingsley-Bate NW42 User manual

Kingsley-Bate
NW42 Newport 42" Round Folding Dining Table
Assembly Instructions

KINGSLEY – BATE
Fine Garden Furniture
0ASSEMBLY INSTRUCTIONS FOR THE NW - 42
TABLE TOP LEG ASSEMBLY LEG ASSEMBLY
1STEP-I
Unpack, inspect and lay the parts on clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture pl ease match all joints with t he corresponding
letters or numbers stamped on the furniture.
STEP-II
Carefully attach both LEG ASSEMBLIES usi ng the knock down bolts, the brass sleeves
and the brass caps. Tighten the caps to the knock down bolts using the two allen
wrenches provided as shown in the diagrams.

STEP-III
Fit the completed LEG ASSEMBLY round bars into the
notches in the aprons of the TABLE TOP.
STEP-IV
Lock the latches to secure the LEG ASSEMBLY to the TABLE
TOP.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE
DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU
FOR CHOOSING OUR FURNITURE.
*KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE IF THESE
INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
7200 Gateway Court, Manassas, Virginia 20109
Phone. [phone], Fax. [phone]