AuthenTeak Kingsley-Bate BO77 User manual

Kingsley-Bate
BO77 Boca Rectangular Dining Table
Assembly Instructions

KINGSLEY–BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR THE BO-77
LEG ASSEMBLY TABLE TOP LEG ASSEMBLY
STEP-I:
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid
marring the parts.
NOTE: This assembly will require two people to avoid damage.
STEP-II:
Position the LEG ASSEMBLIES with the bolt holes at the bottom as
shown in the photographs and be sure to match the stickers on the LEG
ASSEMBLIES with the matching stickers on the TABLE TOP.
STEP-III:
Place TABLE TOP through LEG
ASSEMBLIES and lay it down as shown in the
photographs. If lined up properly the locating
pins on the LEG ASSEMBLIES will go into the TABLE TOP recess holes.
STEP-IV:
Insert the bolts and
tighten them using
the allen key tool
provided.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER
NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
0IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]