AuthenTrend ATWallet User manual

Quickstart Guide

Check your box
contents
Recovery Sheets
AT.Wallet
USB Docking
USB Cable

E-ink Display
LED #1 #2
Fingerprint Sensor Serial Number
Charge your AT.Wallet first.
Insert your AT.Wallet card into the docking to
connect to the USB port or any adaptor.

Contents
Wallet Creation or Recovery
Transactions
Wallet's Features & Settings

Wallet Setup
-Wallet creation

Download the AT.Wallet app from the
App Store, Google Play or Windows
Scan the QR code directly and the link will take you to
the store page for your OS, very convenient ！

Set up your AT.Wallet with either
Bluetooth or USB
Press the power button to turn on AT.Wallet.
Double-press the power button to start Bluetooth
secure pairing mode. >>> LED#2 is in Cyan!
You can see your AT.Wallet is on the app. Click!
It's much easier to pair your AT.Wallet with your phone
in BLE mode.
1.
2.
3.
x2

Click 'Pairing' on the app.
Check the codes shown on your card and the app
are the same.
Touch the fingerprint sensor to start pairing.
1.
2.
3.
Bluretooth pairing request
481854

Enroll FP
Touch the sensor with a wide range of your finger
around 14-16 times until 100% enrollment.
Enroll your fingerprint

Verify FP
LED#2 shows GREEN when you finish enrollment.
Verify the enrolled fingerprint to log into AT.Wallet app.
1.
2.
Verify the enrolled fingerprint
Pass

Once your AT.Wallet is paired with the app, name
your wallet first.
Choose 'Create a new wallet' or 'Recover you wallet'
to start. Let's start by creating a new wallet.
1.
2.
Initialize Wallet

Select language
Select length of Mnemonic.
Write down Mnemonic words to the “Recovery
Sheet” inside the box, and carefully keep it in a safe
place.
1.
2.
3.
Create a new wallet

Answer questionnaires following the “Recovery
Sheet” that you wrote down.
(option) For better security, you can assign
“Passphrase” for those “Mnemonic words” for
recovery, so that when you do “recover wallet base
on Mnemonic words”, it requires you to type correct
“Passphrase” to recover.
Please remember your Passphrase, we won’t
record it!
1.
2.
3.
Your wallet is set up!

Congratulations! You have successfully created
your wallet. Now you can click the '+' icon located
on the bottom to add supported cryptocurrencies or
tokens.
1.
Add cryptocurrencies / tokens

Wallet Setup
-Wallet Recovery

Please take out your recovery sheet or recovery phrase,
paste them spaces in order. Whether AT.Wallet you
have used before or other wallets can be recovered
here.
Choose 'Recover your wallet'

Add your cryptocurrency that you would like to recover.
If you have set a passphrase while creating the wallet
before, please enter it!
Recover cryptocurrency

Congratulations! You have successfully recovered
your wallet. Now you can click the '+' icon located
on the bottom to add supported cryptocurrencies or
tokens.
1.
Add cryptocurrencies / tokens

Transaction
-Sending Crypto

Before you doing any transaction, you have to click on
the preferred Coin / Token first!
Click your preferred cryptocurrency