Automatic Systems CL 636 User manual
p. 1/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
CL 636
www.automatic-systems.com
Technical Manual
(English version)
Rev.00
p. 2/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
DOCUMENT REVISION
Rev. Date Writer Checked by Subject
00 01/2016 SLu
p. 3/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
TABLE OF CONTENTS
1. SAFETY WARNINGS................................................................................. 4
2. ELECTRONIC MAIN BOARD..................................................................... 5
..................................................6
......................................................................................................7
........................................................................................................ 8
....................................................................................9
.................................................................................10
.................................................................17
..................................................18
...............................................................................19
..................................................................................20
3. PROGRAMMING AND ANALYSIS. ......................................................... 21
..................................................22
............................................22
p. 4/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
1. SAFETY WARNINGS.
•
•
Automac Systems
•
•
•
• Automac Systems
•
•
•
•
Automac
Systems.
•
•
p. 5/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
2. ELECTRONIC MAIN BOARD.
p. 6/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
Automac Systems
p. 7/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
Unlock
Console
CARD I/O 315
Metal detector
Mechanical lock
Internal magnet
Power supply
Internal rubber side
External rubber side
Baeries
SUN system
Light
External magnet
Internal motor
Internal proximity
Internal Encoder
Internal push buon
Internal mobile guide
CE Intercom call
buon
SAIMA metal detector
(with digital console)
Weight cell
External motor
External proximity
External encoder
External push buon
External
mobile guide
Speaker
ELECTRONIC MOTHERBOARD
310cv 14A 310cv 08A
310cv 18A
310cv 17A
310cv 03A
310cv 13A
310cv 07A
310cv 02A
310cv 11A
310cv 05A
310cv 14A
310cv 21A
310cv 19A
310cv 12A
5808022
310cv 01A
310cv 06A
310cv 20A
310cv 04A
cv 10A
5806791
5806791
p. 8/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
Front side view
Power input 220V
10A Fuse
Main switch
Back side view
+ 24V + 24V
+ 24V
GND
GNDGND
Baery power check
Power presence
p. 9/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
1 2 3 4 5 6 7 8
1
2
3
4
5
53
4
p. 10/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
Brown Brown
Green/Black Green/Black
White White
MOTOR POWER SUPPLY
MOTOR POWER SUPPLY
MOTOR POWER SUPPLY
MOTOR POWER SUPPLY
NETTED NETTED
+ 24V + 24V
+ 24V
GND GND
GND
Brown Brown
Green/Black Green/Black
White White
MOTOR POWER SUPPLY
MOTOR POWER SUPPLY
MOTOR POWER SUPPLY
MOTOR POWER SUPPLY
NETTED NETTED
+ 24V + 24V
+ 24V
GND GND
GND
Green PORTER
GND
GND
(INTER. BUTTON) V+
Yellow PORTER
White PORTER
Brown PORTER
LIGHT POWER SUPPLY
LIGHT POWER SUPPLY
INTERCOM BUTTON
+ SPEAKER
White
White
White
Red Red
Red
Black
p. 11/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
GND GND
GND
+ 24V + 24V
+ 24VBATTERY POWER CHECK
POWER PRESENCE
p. 12/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
p. 13/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
p. 14/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
p. 15/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
p. 16/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
LED CONDITION MEANING
OLD 1 on
OLD 2 on
OLD 1 and 2 on
OLD 3 on
OLD 1 and 3 on
Encoder error
Weight error
One rubber side excluded
Micro posion error
Encoder direcon error
SAIMA
p. 17/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
DB9 male connector that connects the weightsystem:
Soldering side
Opmal working measures
p. 18/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
p. 19/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
X
p. 20/24
The informaon contained in this document is the property of Automac Systems and is condenal. The recipient shall refrain from using this informaon for any purpose other than the
use of the products or the execuon of the project to which it refers and from communicang it to third pares without prior wrien agreement of Automac Systems. The document is
subject to change without noce.
CL 636-MT-EN
Table of contents
Popular Shower Cabin manuals by other brands
glass 1989
glass 1989 SOHO QR Installation & maintenance manual
THE SHOWER LAB
THE SHOWER LAB View 45 manual
ERLIT
ERLIT ER4508TP Installation and operation instruction
Radaway
Radaway Essenza New PTJ Assembly instruction
Aurlane
Aurlane CAB 118E manual
KUDOS
KUDOS Pinnacle 8 CENTREFOLD 800 installation instructions
