AV-Box TPUH-BYE20 User manual

TPUH-BYE20
4K HDMI Extender
All Rights Reserved
Version: TPUH-BYE20_2019V1.1
User Manual

4K HDMI Extender
1
Statement
Read this user manual carefully before using the product. Pictures shown in this manual are for reference
only. Different models and specifications are subject to real product.
This manual is only for operation instruction, please contact the local distributor for maintenance
assistance. The functions described in this version were updated till January, 2019. In the constant effort
to improve the product, we reserve the right to make functions or parameters changes without notice or
obligation. Please refer to the dealers for the latest details.
Safety Precaution
To ensure the best performance from the product, please read all instructions carefully before using the
device. Save this manual for further reference.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
Do not dismantle the housing or modify the module to avoid electrical shock or burn.
Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or
malfunction.
Do not expose the unit to rain, moisture or install this product near water.
Install the device in a place with fine ventilation.
Do not twist or pull by force ends of the CAT5e/CAT6a cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit.Always unplug the power to the device before
cleaning.
Unplug the power cord when left unused for a long period of time.
Refer all servicing to qualified service personnel.
Customer Service
We provide limited warranty for the product within three years. Please contact your distributor for more
details.
Introduction
Thanks for choosing the TPUH-BYE20 extender kit which consists of a transmitter (Tx) and a receiver
(Rx). It allows to extend a 4K@60Hz 4:4:4 HDMI signal to distance up to 131ft/40m and 1080P@60Hz up
to 230ft/70m over a single CATx Ethernet cable. It supports bi-directional 24V Power over Cable (PoC),
which simplifies the wiring to allow only a single AC power adapter usage. It supports bi-directional IR
pass-through extension, allowing for control of local video source device or the remote display. Moreover,
it supports CEC pass-through. It also adopts a visually lossless video compression technology (VLC) to
ensure the HD lossless transmission of 4K@60Hz 4:4:4.

4K HDMI Extender
2
Features
HDMI 2.0 standard and HDCP 2.2 compliant.
Supports video resolution up to 4Kx2K@60Hz 4:4:4.
Transmission distance is up to 131ft/40m for 4Kx2K, and 230ft/70m for 1080P.
Supports bi-directional IR pass-through for long-distance control.
Supports bi-directional 24V PoC.
Supports CEC.
Visually Lossless Compression (VLC) technology.
Package List
1x Transmitter (TX)
1x Receiver (RX)
2x TX Mounting Ears with 2 Screws
2x RX Mounting Ears with 2 Screws
1x Power Adaptor (24V DC, 1.25A)
1x User Manual
Transmitter Panel Description
No.
Name
Description
①
HDMI In
Type-A HDMI port to connect the source device (e.g. Blu-ray DVD).
②
IR IN
3.5mm jack to connect an IR receiver (not included).
③
IR OUT
3.5mm jack to connect an IR emitter (not included).
④
HDBT Out
RJ45 connector for a CATx Ethernet cable to connect the transmitter and
the receiver. The LINK LED illuminates when there is a valid HDBaseT™
link between the transmitter and the receiver. The HDCP LED illuminates
when the video contains HDCP content.
⑤
Power LED
Illuminates red when power is applied.
⑥
DC 24V
DC barrel connector to connect theAC power adapter.
IROut
IRInHDMIIn DC 24VHDBTOut
123456

4K HDMI Extender
3
Receiver Panel Description
No.
Name
Description
①
HDMI Out
Type-A HDMI port to connect an HDMI display.
②
IR IN
3.5mm jack to connect an IR receiver (not included).
③
IR OUT
3.5mm jack to connect an IR emitter (not included).
④
HDBT In
RJ45 connector for a CATx Ethernet cable to connect the transmitter and
the receiver. The LINK LED illuminates when there is a valid HDBaseT™
link between the transmitter and the receiver. The HDCP LED illuminates
when the video contains HDCP content.
⑤
Power LED
Illuminates red when power is applied.
⑥
DC 24V
DC barrel connector to connect theAC power adapter.
System Diagram
Note: This picture is for reference only. The specific scheme is subject to real devices.
IROut
IRInHDMIOut DC 24VHDBTIn
123456
DisplayBlu-Ray DVD
IR
Emitter IR Receiver
Display Remote
IR:
HDMI:
HDBaseT:
RS232:
1080P 70m
4K 40m
IR
Emitter
IR Receiver
Blu-Ray Remote
Transmitter (TX) Receiver R( X)

4K HDMI Extender
4
Specification
Transmitter (Tx)
Input
(1) HDMI
Input Connector
(1) Female type-A HDMI
Output
(1) HDBT
Output Connector
(1) RJ45
Control
(1) IR IN, (1) IR OUT
Control Connector
(2) 3.5mm mini jacks
Receiver (Rx)
Input
(1) HDBT
Input Connector
(1) RJ45
Output
(1) HDMI
Output Connector
(1) Female type-A HDMI
Control
(1) IR IN, (1) IR OUT
Control Connector
(2) 3.5mm mini jacks
General
Video Resolution
Up to 4Kx2K@60Hz 4:4:4
Transmission Mode
HDBaseT
Transmission Distance
1080P@60Hz ≤230ft/70m,
4K@60Hz ≤131ft/40m
HDMI Version
2.0
HDCP Version
2.2
Bandwidth
18Gbps
Power Consumption
9.5W (Max)
Operating Temperature
-10℃~ +55℃
Storage Temperature
-25℃~ +70℃
Relative Humidity
10%-90%
Power Supply
Input Power: 24V DC 1.25A or Power over Cable (PoC)，
AC Adaptor Input Power: 100~240VAC, 50/60Hz
Dimension (W*H*D)
74mm x 18mm x 120mm
Net Weight (g)
Tx/Rx:235g