Avalue Technology EEV-EX15 User manual

Part No. E2047EX1500R
EEV-EX15
COM Express Type 10 Evaluation Carrier Board
User’s Manual
1st Ed –24 December 2018

EEV-EX15 User’s Manual
2 EEV-EX15 User’s Manual
Contents
1. Getting Started...............................................................................................................4
1.1 Safety Precautions ................................................................................................4
1.2 Packing List...........................................................................................................4
1.3 Document Amendment History..............................................................................5
1.4 System Specifications ...........................................................................................6
1.5 Architecture Overview—Block Diagram.................................................................8
2. Hardware Configuration................................................................................................9
2.1 Product Overview................................................................................................10
2.2 Jumper and Connector List..................................................................................11
2.3 Setting Jumpers & Connectors............................................................................13
2.3.1 Multi-function select (SW1)...................................................................................................... 13
2.3.2 Clear CMOS (JBAT1).............................................................................................................. 13
2.3.3 ATX1 Power connector (ATX1)............................................................................................... 14
2.3.4 ATX2 Power connector (ATX2)............................................................................................... 14
2.3.5 CPU Fan connector (FAN1) .................................................................................................... 15
2.3.6 General Purpose I/O connector (JDIO1)................................................................................. 15
2.3.7 TAG connector (JTAG1).......................................................................................................... 16
2.3.8 Front panel connector (JFP1).................................................................................................. 16
2.3.9 LCD backlight brightness adjustment (JVR1).......................................................................... 17
2.3.10 LCD Inverter connector (JBKL1) ............................................................................................. 17
2.3.10.1 Signal Description –LCD Inverter connector (JBKL1)............................................ 17
2.3.11 LPC port connector (JLPC1) ................................................................................................... 18
2.3.12 Battery connector (BH1).......................................................................................................... 18
2.3.13 LVDS connector (LVDS1)........................................................................................................ 19
2.3.14 EDP connector (EDP1)............................................................................................................ 20
2.3.15 Test position connector (JTP1) ............................................................................................... 20
2.3.16 IET connector (IET_CB1) only used in production testing ...................................................... 21
2.3.17 COM Express connector (COM_EX_BASE1)......................................................................... 22
2.3.17.1 Signal Description –COM Express connector (COM_EX_BASE1)........................ 26
2.3.17.1.1 Audio Signals......................................................................................... 26
2.3.17.1.2 Gigabit Ethernet Signals ....................................................................... 26
2.3.17.1.3 PCI Express Signals ............................................................................. 26
2.3.17.1.4 Flat Panel LVDS Signals....................................................................... 26
2.3.17.1.5 LPC Signals........................................................................................... 27
2.3.17.1.6 GPIO Signals......................................................................................... 27
2.3.17.1.7 Power & System Management Signals................................................. 27
2.3.17.1.8 SATA Signals........................................................................................ 27

User’s Manual
EEV-EX15 User’s Manual 3
2.3.17.1.9 USB Signals.......................................................................................... 28
2.3.17.1.10 I2C Signals............................................................................................ 28
2.3.17.1.11 USB3.0 Signals ..................................................................................... 28
2.3.17.1.12 DDI Signals............................................................................................ 28
2.4 EEV-EX15 Expansion Boards .............................................................................29
2.4.1 EEV-EX15 DB-A PCIe Expansion board................................................................................. 29
2.4.2 EEV-EX15 DB-B LAN Expansion board.................................................................................. 29
2.5 EEV-EX15 Expansion Boards Jumper & Connector list......................................30
2.5.1 EEV-EX15 DB-A PCIe Expansion board................................................................................. 30
2.5.2 EEV-EX15 DB-B LAN Expansion board.................................................................................. 30
2.6 EEV-EX15 DB-A PCIe Expansion board Setting.................................................31
2.6.1 +12V VIN Power select (AJPWR1/2) ...................................................................................... 31
2.6.2 Power connector (ACN1)......................................................................................................... 31
2.6.3 Gold Finger (AGF1)................................................................................................................. 32
2.7 EEV-EX15 DB-B LAN Expansion board Setting..................................................33
2.7.1 Gold Finger (BGF1)................................................................................................................. 33
3. Mechanical Drawing ....................................................................................................34

EEV-EX15 User’s Manual
4 EEV-EX15 User’s Manual
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x EEV-EX15 COM Express Type 10 Evaluation Carrier Board
1 x Expansion board for PCIe
1 x Expansion board for LAN
1 x I/O SHIELD for EEV-EX15
4 x M3-5L Ni Screws for installing Carrier Board
1 x Desiccant (5g)

User’s Manual
EEV-EX15 User’s Manual 5
1.3 Document Amendment History
Revision
Date
By
Comment
1st
December 2018
Avalue
Initial Release

EEV-EX15 User’s Manual
6 EEV-EX15 User’s Manual
1.4 System Specifications
System
System
COM Express Type 10 CPU Module Socket: Supports COM Express Type 10
compatible CPU Modules
BIOS
SPI FLASH SOIC 8PIN SOCKET
Expansion
1PCIe Slot x 4,
1 x SDIO/DIO (optional, depend on module board)
1 x IET
I/O
SATA
2 x SATA
USB
2 USB3.0 (contain 2 x USB2.0), 6 x USB2.0
GPIO
8-bit GPIO
Display
HDMI
PTN3360DBS
Audio
AC97 Codec
ALC892
Audio Interface
MIC In & Line Out
Internal I/O Connectors
CPU Fan
1 x FAN
LVDS
1 x LVDS & 1 x eDP
GPIO
8-bit GPIO
Carrier Board Power
One Switch Button
Carrier Board Switch
One Switch Button
Power Connector
ATX, One 12 x 2-pin & 2 x 2-pin(12V Aux Power) Connector
Miscellaneous Setting
Connector
RTC Battery x 1,DIOx4/SDIOX1(Mux with GPIO)
1 x COM Express connector
External I/O
Connectors
USB
USB3.0(contain 2 x USB2.0), 6 x USB2.0
LAN
1 x RJ45
HDMI
DP/HDMI Connector, 1 x HDMI, 1 x DP
Audio Jack
2 x Audio Jack
Mechanical &
Environmental
Power Type
ATX
Operating Temp.
Standard: 0°C to 60°C (32°F ~ 140°F)

User’s Manual
EEV-EX15 User’s Manual 7
Storage Temp.
-45°C to +85°C (-40°F ~ 185°F)
Operating Humidity
0% ~ 90% Relative Humidity, Non-condensing
Size (L x W)
(Please consult product
engineers for the production
feasibility if the size is larger
than 410 x 360mm or smaller
than 80 x 70mm)
6.7” x 6.7”
(170mm x 170mm)
OS Support
(listed in accordance with Intel
document)
According to COMe Module solution
Note: Specifications are subject to change without notice.

EEV-EX15 User’s Manual
8 EEV-EX15 User’s Manual
1.5 Architecture Overview—Block Diagram
The following block diagram shows the architecture and main components of EEV-EX15.

User’s Manual
EEV-EX15 User’s Manual 9
2. Hardware
Configuration

EEV-EX15 User’s Manual
10 EEV-EX15 User’s Manual
2.1 Product Overview

User’s Manual
EEV-EX15 User’s Manual 11
2.2 Jumper and Connector List
You can configure your board to match the needs of your application by setting jumpers. A
jumper is the simplest kind of electric switch.
It consists of two metal pins and a small metal clip (often protected by a plastic cover) that
slides over the pins to connect them. To “close” a jumper you connect the pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1,
2, and 3. In this case, you would connect either two pins.
The jumper settings are schematically depicted in this manual as follows:
A pair of needle-nose pliers may be helpful when working with jumpers.
Connectors on the board are linked to external devices such as hard disk drives, a
keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to
configure your system to suit your application.
If you have any doubts about the best hardware configuration for your application, contact
your local distributor or sales representative before you make any changes.
The following tables list the function of each of the board's jumpers and connectors.
Jumpers
Label
Function
Note
SW1
Multi-function select
DIP switch 8pin
JBAT1
Clear CMOS
3 x 1 header, pitch 2.54mm
Connectors
Label
Function
Note
AUDIO1/2
Audio connector 1/2
ATX1
ATX1 Power connector
12 x 2 wafer, pitch 4.20mm
ATX2
ATX2 Power connector
2 x 2 wafer, pitch 4.20mm
FAN1
CPU fan connector
4 x 1 wafer, pitch 2.54mm
JDP_HDMI1
Display port connector /HDMI
connector

EEV-EX15 User’s Manual
12 EEV-EX15 User’s Manual
SDCARD1
SD card slot
COM_EX_BASE1
COM Express connector
JTP1
Test position connector
13 x 2 header, pitch 2.00mm
IET_CB1
IET connector
40 x 2 wafer, pitch 0.80mm
(only used in production testing)
JTAG1
TAG connector
10 x 1 header, pitch 2.54mm
JVR1
LCD backlight brightness adjustment
3 x 1 header, pitch 2.00mm
LAN1
Ethernet connector
JDIO1
General Purpose I/O connector
6 x 2 header, pitch 2.00mm
JFP1
Front panel connector
4 x 2 header, pitch 2.00mm
UART_BUT1
UART button
PWRBTN1
Power button
RESET1
Reset button
USB1/3/4
6 x USB2.0 connector
USB2
2 x USB3.0 connector
PCIE1
PCI Express connector
SATA1/2
Serial ATA connector
LVDS1
LVDS connector
20 x 2 box header, pitch 1.25 mm
Matching Connector: Hirose
DF13-40DS-1.25C
JBKL1
LCD Inverter connector
5 x 1 wafer, pitch 2.00mm
Matching Connector: JST PHR-5
JLPC1
LPC port connector
7 x 2 header, pitch 2.00mm
EDP1
EDP connector
10 x 2 wafer, pitch 1.25mm
BH1
Battery connector
2 x 1 wafer, pitch 1.25mm

User’s Manual
EEV-EX15 User’s Manual 13
2.3 Setting Jumpers & Connectors
2.3.1 Multi-function select (SW1)
Function
ON
OFF
1
BIOS ROM select
Default
2
BIOS ROM select
Default
3
ESPI/LPC select
ESPI
LPC
4
ERP setting
ERP ON
ERP OFF
5
PSON Control
Power button
S3
6
USB_HOST_PRSNT
SEL
NO Detect
7
DP/HDMI select
(optional)
DP
HDMI
8
LVDS/eDP select
(optional)
LVDS
eDP
2.3.2 Clear CMOS (JBAT1)
* Default
Protect*
Clear CMOS

EEV-EX15 User’s Manual
14 EEV-EX15 User’s Manual
2.3.3 ATX1 Power connector (ATX1)
Signal
PIN
PIN
Signal
+3.3V
13
1
+3.3V
NC
14
2
+3.3V
GND
15
3
GND
PSON#
16
4
+5V
GND
17
5
GND
GND
18
6
+5V
GND
19
7
GND
NC
20
8
PWR_OK
+5V
21
9
+5VSB
+5V
22
10
+12V
+5V
23
11
+12V
GND
24
12
+3.3V
2.3.4 ATX2 Power connector (ATX2)
Signal
PIN
PIN
Signal
+VIN
4
3
+VIN
GND
2
1
GND

User’s Manual
EEV-EX15 User’s Manual 15
2.3.5 CPU Fan connector (FAN1)
Signal
PIN
GND
1
+12V
2
FAN_TACHIM
3
+5V
4
2.3.6 General Purpose I/O connector (JDIO1)
Signal
PIN
PIN
Signal
DIO_OUT0_SD_CLK
1
2
DIO_IN0_SD_DATA0
DIO_OUT1_SD_CMD
3
4
DIO_IN1_SD_DATA1
DIO_OUT2_SD_WP
5
6
DIO_IN2_SD_DATA2
DIO_OUT3_SD_CD#
7
8
DIO_IN3_SD_DATA3
SMB_CLK
9
10
SMB_DAT
GND
11
12
+5V

EEV-EX15 User’s Manual
16 EEV-EX15 User’s Manual
2.3.7 TAG connector (JTAG1)
Signal
PIN
+3.3V
1
GAL1_TCK
2
GAL1_TDO
3
GAL1_TDI
4
GAL1_TMS
5
GND
6
I2C_DAT_UART_TX
7
I2C_CLK_UART_RX
8
GAL1_EN
9
+3.3V
10
2.3.8 Front panel connector (JFP1)
Signal
PIN
PIN
Signal
EXT_PWRBTN#
1
2
GND
SYS_RERST#
3
4
GND
+5V
5
6
GND
+5V
7
8
SATA_LED_OUT#
Pin
1
2
3
4
5
6
7
8
Signal
Power Button
Reset
Power LED
SATA LED

User’s Manual
EEV-EX15 User’s Manual 17
2.3.9 LCD backlight brightness adjustment (JVR1)
Signal
PIN
+5V
1
EDP_BRIGHT_CTRL
2
GND
3
2.3.10 LCD Inverter connector (JBKL1)
Signal
PIN
+VCC_BKL
1
GND
2
BKLEN
3
EDP_BRIGHT_CTRL
4
+5V
5
2.3.10.1 Signal Description –LCD Inverter connector (JBKL1)
Signal
Signal Description
LVDS_BKLT_CTRL
when LVDS_BKLT_CTRL is controlled by carrier board's JVR1,
Vadj = 0.75V ~ 4.25V (Recommended: 4.7KΩ, >1/16W)
BKLEN
LCD backlight ON/OFF control signal

EEV-EX15 User’s Manual
18 EEV-EX15 User’s Manual
2.3.11 LPC port connector (JLPC1)
Signal
PIN
PIN
Signal
LPC_AD0/ESPI_IO_0
1
2
+3.3V
LPC_AD1/ESPI_IO_1
3
4
JLPC_RST#
LPC_AD2/ESPI_IO_2
5
6
LPC_FRAME#/ESPI_CS0#
LPC_AD3/ESPI_IO_3
7
8
PORT80_CLK
LPC_SERIRQ/ESPI_CS1#
9
10
GND
+5V
11
12
GND
+5VSB
13
14
LPC_DRQ1#/ESPI_ALERT1
2.3.12 Battery connector (BH1)
Signal
PIN
+3.3VSB
1
GND
2

User’s Manual
EEV-EX15 User’s Manual 19
2.3.13 LVDS connector (LVDS1)
Signal
PIN
PIN
Signal
+5V
2
1
+3.3V
+5V
4
3
+3.3V
LVDS_DDC_SD
6
5
LVDS_DDC_SC
GND
8
7
GND
LVDSA_DATA0
10
9
LVDSA_DATA1
LVDSA_DATA0#
12
11
LVDSA_DATA1#
GND
14
13
GND
LVDSA_DATA2
16
15
LVDSA_DATA3
LVDSA_DATA2#
18
17
LVDSA_DATA3#
GND
20
19
GND
NC
22
21
NC
NC
24
23
NC
GND
26
25
GND
NC
28
27
NC
NC
30
29
NC
GND
32
31
GND
LVDSA_CLK
34
33
NC
LVDSA_CLK#
36
35
NC
GND
38
37
GND
+12V
40
39
+12V

EEV-EX15 User’s Manual
20 EEV-EX15 User’s Manual
2.3.14 EDP connector (EDP1)
Signal
PIN
PIN
Signal
GND
2
1
GND
EDP_TX3#
4
3
EDP_TX0#
EDP_TX3
6
5
EDP_TX0
NC
8
7
GND
GND
10
9
EDP_TX1#
EDP_AUX#
12
11
EDP_TX1
EDP_AUX
14
13
GND
GND
16
15
EDP_TX2#
EMB_HPD
18
17
EDP_TX2
+VDD_EDP
20
19
+VDD_EDP
2.3.15 Test position connector (JTP1)
Signal
PIN
PIN
Signal
SER0_TX
1
2
SER0_RX
SER1_TX
3
4
SER1_RX
I2C_CK
5
6
I2C_DAT
TPM_PP
7
8
+3.3VSB
LID#
9
10
GND
SLEEP#
11
12
GND
GBE0_SDP
13
14
GND
USB0_HOST_PRSNT
15
16
GND
SMB_ALERT#
17
18
GND
THRM#
19
20
GND
WAKE0#
21
22
GND
WAKE1#
23
24
GND
BATLOW#
25
26
GND