Avantco A21110 User manual

Assembly manual for trailer A21110 & A21111
1. Drawbar
Install the towing coupling in the drawbar’s rotating end, as shown in picture below. The
coupling fits tight, so a hammer might be necessary.
Turn the trailer upside down and install the drawbarto the chassis:

When installing the drawbar, note thatthe drawbar support should be facing the ground
when the trailer is upright:
Drawbar support
2. Install wheels while the trailer is upside down:

3. Turn the trailer upright, remove the bolts that hold the side plywood to the chassis and place
side supports as shown in the picture:
Note that the outer side supports have to have bracket answers riveted to them.

4. Place the side profile plates as shown on the picture and fix the side plates to the chassis, on
the points marked with arrows:

5. Install the 2‐part end plates:
1)
2)