About Avaya
Businesses are built on the experiences they provide and
every day millions of those experiences are built by Avaya
(NYSE:AVYA). For over one hundred years, we’ve enabled
organizations around the globe to win—by creating intelligent
communications experiences for customers and employees.
Avaya builds open, converged and innovative solutions to
enhance and simplify communications and collaboration—
in the cloud, on premise, or a hybrid of both. To grow your
business, we’re committed to innovation, partnership, and
a relentless focus on what’s next. We’re the technology
company you trust to help you deliver Experiences that Matter.
Visit us at www.avaya.com.
Setting Up this Device
Connect the cables as detailed in the diagram overleaf, then
follow the steps below to complete the setup of the Avaya
Premium XT 3-way Microphone Pod. For details on how to use
the system after setup, see the User Guide for Avaya IX Video
Conferencing XT Series.
NOTE: The optional Avaya XT Premium 3-way POD can be
used as a single POD for the Avaya XT Executive 240 and
Avaya XT4000 Series, or as a cascaded second POD for the
Avaya XT5000, Avaya XT4300 and Avaya XT7000 Series. It
cannot be cascaded to the Avaya XT 3-way PODs (now End of
Sale).
CAUTION:
Make sure all units are switched off whenever
connecting or disconnecting devices.
P/N B0162111-02028
© 2020 Avaya Inc. All Rights Reserved. Avaya and the Avaya logo are trademarks of Avaya Inc. and are registered
in the United States and other countries. All other trademarks identified by ®, TM, or SM are registered marks,
trademarks, and service marks, respectively, of Avaya Inc. 03/20 • 62111-02028 Avaya XT Premium 3-way Microphone
Pod QSG
If the POD is connected as the second
POD (XT5000, XT4300 and XT7000), the
procedure is as follows:
Step 1.
Check if the first Premium 3-way POD is correctly connected
to the rear panel of the Avaya XT codec.
Step 2.
Use the cable supplied with the new POD to connect one of
the two ports on the bottom panel of the new microphone
POD to the available port of the first microphone POD.
Step 3.
Fasten the cables to the device with the cable hooks located
on the bottom of the POD. To obtain an optimal audio capture
and post processing, place the two PODs at a distance of at
least two meters from each other.
If the POD is connected as the first POD, the
procedure is as follows:
Step 1.
Connect the new Microphone Pod output to the microphone
input on the rear panel of the Avaya XT endpoint.
Step 2.
Fasten the cable to the device with the cable hook located on
the bottom of the POD.
Step 3.
Place the POD in the middle of the table.
Both available ports can be used
as input or output
XT7000 Series
Microphones
XT Executive and XT4000 Series
Microphones
2 x Three-Way
Microphone Pod
Three-Way
Microphone Pod
