Avaya Cajun P550R User manual

Cajun™
P550R/P880/P882
Switch User
Guide
Version 5.0
March 2001

Cajun P550R/P880/P882 Switch User Guide - Version 5.0
© Copyright Avaya Inc., 2001 ALL RIGHTS RESERVED
Produced in USA, March, 2001
The products, specifications, and other technical information regarding the products contained
in this document are subject to change without notice. All information in this document is
believed to be accurate and reliable, but is presented without warranty of any kind, express or
implied, and users must take full responsibility for their application of any products specified in
this document. Lucent disclaims responsibility for errors which may appear in this document,
and it reserves the right, in its sole discretion and without notice, to make substitutions and
modifications in the products and practices described in this document.
P550R is a registered trademark of Avaya Inc.
Avaya, Cajun, CajunDocs, OpenTrunk, CajunView, QIP, and RealNet are trademarks of Avaya
Inc.
Microsoft, Windows, Windows NT, Windows 95, Windows 98, and Internet Explorer are
trademarks or registered trademarks of Microsoft Corporation in the U.S. and/or other
countries.
Netscape and Netscape Navigator are registered trademarks of Netscape Communications
Corporation in the United States and other countries.
Sybase is a registered trademark of Sybase, Inc.
Novell, NDS, Netware, and Novell Directory Services are registered trademarks of Novell, Inc.
Solaris is a trademark of Sun Microsystems, Inc.
Intel and Pentium are registered trademarks of Intel Corporation.
ALL OTHER TRADEMARKS MENTIONED IN THIS DOCUMENT ARE PROPERTY OF THEIR
RESPECTIVE OWNERS.

ivCajun P550R/P880/P882 Switch User Guide
Table of Contents
Overview of the Contents 27
Technical Support 30
Avaya Technologies Products and Services 30
Conventions 31
Using Notes, Cautions, and Warnings 33
Related Documentation 33
Online Documentation 33
Online Help 34
Installing Online Documentation and Help Files 34
Installing the HTTP Documentation Server 35
Starting the HTTP Web Server 35
Entering the Server Location on the Switch 35
Adding Document Files to an Existing Server 36
Downloading an Updated CajunDocs CD from the Internet 37
Documentation 37
Terminology 38
Documentation Feedback 38
Chapter 1 — Introduction to the Cajun P550R/P880/P882 Switch 1-1
Overview 1-1
Switch Description 1-1
Hardware Components 1-2
Chassis 1-2
50-Series Mode 1-2
80-Series Mode 1-3
P550R Chassis 1-3
Slots 1-3
Ports 1-3
Fan Tray 1-4
Power Supplies 1-4
Switch Fabric 1-4
P880/P882 Chassis 1-6
Slots 1-6
Ports 1-6
Fan Tray 1-7
Power Supplies 1-7
Switch Fabric 1-7
50-Series Modules 1-8
Layer 2 Supervisor Module 1-8
Layer 3 Supervisor Module 1-9

vCajun P550R/P880/P882 Switch User Guide
Redundant Supervisor 1-11
Media Modules 1-12
Layer 2 and Layer 3 Fast Ethernet Modules 1-13
Layer 2 and Layer 3 Gigabit-Speed Modules 1-13
ATM Uplink Module 1-13
80-Series Modules 1-14
Software Features 1-15
Virtual Bridging Functions 1-16
Flood Pruning Using VLANs 1-16
Hunt Groups 1-17
OpenTrunk Technology 1-17
Domain Naming System (DNS) Client Support 1-18
Remote Authentication Dial-In User Service (RADIUS) Client
Support 1-19
OSPF Passive-Interface Support 1-19
Load MIB 1-20
Spanning Tree Modes 1-20
Spanning Tree Protocol Bridge Options 1-21
Global Disable 1-24
Extensive Fault Tolerance 1-25
Buffer and Queue Management 1-25
Routing Overview 1-26
Compatibility with the Layer 2 Switch 1-26
Routing with Layer 2 and Layer 3 Modules 1-27
Chapter 2 — Initialize and Setup of the P550R/P880/P882 Switch 2-1
Overview 2-1
Setting Up Your Laptop or PC Monitor 2-2
Configuring the Supervisor Module Using the CLI 2-2
Configuring the Switch Using the Web Agent 2-6
Opening the Web Agent 2-7
Moving through the Web Agent 2-9
Setting Up User Accounts 2-10
Setting Up User Accounts Using the Web Agent 2-10
Setting Up User Accounts Using the CLI 2-12
Setting Up SNMP Communities 2-12
Setting Up SNMP Communities Using the Web Agent 2-12
Setting Up SNMP Communities Using the CLI 2-14
Changing the Console Serial Port Settings 2-15
Configuring the Serial Console Port as a TTY Console 2-15
Configuring the Serial Console Port as a TTY Console Using
the Web Agent 2-15
Configuring the Serial Console Port as a TTY Console Using
the CLI 2-17
Configuring the Serial Console Port as a PPP Console 2-17
Connecting a Modem 2-18
Configuring the Serial Console Port as a PPP Console from
the Web Agent 2-19

vi
Cajun P550R/P880/P882 Switch User Guide
Configuring the Serial Console Port as a PPP Console Using
the CLI 2-21
Regaining Configuration Access to the PPP Serial Port Con-
sole 2-22
Configuring Dial-Up Networking 2-22
Using Dial-Up Networking with a PPP Serial Port Console 2-
24
Managing Configuration Files 2-25
Viewing Your Running Configuration 2-25
Viewing Your Startup Configuration 2-25
Viewing Your Script Execution Log File 2-26
Viewing Your Script Execution Log File Using the Web
Agent 2-26
Viewing Your Script Execution Log File Using the CLI 2-26
Copying Configuration Files 2-26
Copying the Running Configuration to the Startup Configu-
ration Using the Web Agent 2-26
Copying the Running Configuration to the Startup Configu-
ration Using the CLI 2-27
Copying Files 2-27
Copy Files Using the Web Agent 2-27
Copying Files Using the CLI 2-30
Viewing the Status of a TFTP Transfer 2-31
Viewing the Status of a TFTP Transfer Using the Web Agent
2-31
Viewing the Status of a TFTP Transfer Using the CLI 2-31
Chapter 3 — Configuring System Information 3-1
Overview 3-1
Managing System Information 3-1
Entering General System Information 3-2
Entering General System Information Using the Web Agent
3-2
Enabling the Simple Network Time Protocol (SNTP) 3-3
Setting Summer Time Hours 3-4
Setting Recurring Summer Time Hours 3-5
Setting One-Time Summer Time Hours 3-9
Setting the System Clock 3-11
Setting the System Clock Using the Web Agent 3-11
Setting the System Clock Using the Web Agent 3-12
Setting the Temperature System 3-13
Setting the Temperature System Using the Web Agent 3-13
Setting the Temperature System Using the CLI 3-14
Displaying the Power System Statistics 3-14
DisplayingthePowerSystemStatisticsUsingtheWebAgent
3-14
Displaying the Power System Statistics Using the CLI 3-15
Displaying Cooling System Statistics 3-16

vii Cajun P550R/P880/P882 Switch User Guide
Displaying the Cooling System Statistics Using the Web
Agent 3-16
Displaying the Cooling System Statistics Using the CLI 3-16
Performing a Reset 3-17
Performing a Reset Using the Web Agent 3-17
Performing a Reset Using the CLI 3-17
Chapter 4 — Using VLANs, Spanning Tree, Hunt Groups, and VTP
Snooping 4-1
Overview 4-1
VLAN Operation 4-1
Ingress Rules 4-2
Forwarding Rules 4-2
Egress Rules 4-3
Port-Based VLANs 4-3
Creating and Implementing VLANs 4-3
VLAN Considerations 4-3
Creating a VLAN 4-4
Configuring VLAN Parameters 4-7
Creating 3Com Mapping Tables 4-8
Creating 3Com Mapping Tables Using the Web Agent 4-9
Creating 3Com Mapping Tables Using the CLI 4-10
Assigning Ports to VLANs 4-10
Using Spanning Tree Setup and Monitoring 4-10
Managing Spanning Tree 4-10
Managing Spanning Tree Using the Web Agent 4-10
Managing Spanning Trees Using the CLI 4-13
Configuring Spanning Tree Bridge Ports 4-13
Configuring Spanning Tree Bridge Ports Using the Web
Agent 4-13
Configuring Spanning Tree Bridge Ports Using the CLI 4-16
Disabling Spanning Tree Mode for the Port 4-17
Disabling Spanning Tree Mode for the Port Using the Web
Agent 4-17
Disabling Spanning Tree Mode on a Port Using the CLI 4-19
Using Hunt Groups to Aggregate Bandwidth between Switches 4-20
Features 4-20
How Hunt Groups Load Share 4-21
Hunt Group Considerations 4-25
Creating Hunt Groups 4-25
Creating Hunt Groups Using the Web Agent 4-25
Creating Hunt Groups Using the CLI 4-28
Viewing Hunt Group Members 4-29
Viewing Hunt Group Members Using the Web Agent 4-29
Viewing Hunt Group Members Using the CLI 4-29
Adding Ports to a Hunt Group 4-30
Adding Ports to a Hunt Group Using the Web Agent 4-30
Adding Ports to a Hunt Group Using the CLI 4-32

viii
Cajun P550R/P880/P882 Switch User Guide
Configuring VLAN Trunk Protocol (VTP) Snooping 4-32
Configuring VTP Snooping Using the Web Agent 4-33
Configuring VTP Snooping Using the CLI 4-36
Chapter 5 — Configuring Port Parameters 5-1
Overview 5-1
Configuring Port Parameters 5-1
Physical Port Features 5-2
Auto-negotiation 5-2
Flow Control 5-3
Switch Port Features 5-5
Creating Virtual LANs(VLANs) 5-5
Manual VLAN Creation 5-5
Automatic VLAN Creation 5-6
VLAN Operational Rules 5-7
Ingress Rules 5-7
Forwarding Rules 5-8
Egress Rules 5-8
Relationship Between Different Switch Port Parameters 5-9
Assigning VLANs to a Port and Associated Issues 5-12
Configuring Physical Port Parameters on Gigabit Ports 5-14
Configuring Physical Port Parameters on Gigabit Ports Using
the Web Agent 5-14
Configuring Physical Port Parameters on Gigabit Ports Using
the CLI 5-18
Configuring Physical Port Parameters on Fast Ethernet Ports 5-
19Configuring Physical Port Parameters using the Web Agent
5-19
Configuring Physical Port Parameters on Fast Ethernet Ports
Using the CLI 5-25
Using the All Ports Configuration Window 5-26
Viewing Switch Port Parameters 5-28
Viewing Switch Port Parameters Using the Web Agent 5-28
Viewing Switch Port Parameters Using the CLI 5-29
Configuring Switch Port Parameters 5-30
Configuring Switch Port Parameters Using the Web Agent 5-
30
Configuring Switch Ports Using the CLI 5-32
Configuring Port VLAN Parameters 5-33
Configuring Port VLAN Parameters Using the Web Agent 5-
33
Configuring Port VLAN Parameters Using the CLI 5-34
Configuring Non-VLAN Switch Port Parameters 5-35
Configuring Non-VLAN Switch Port Parameters Using the
Web Agent 5-35
Configuring Non-VLAN Switch Port Parameters Using the
CLI 5-37

ix Cajun P550R/P880/P882 Switch User Guide
Configuring Fast Start Mode 5-37
Configuring Fast Start Mode Using the Web Agent 5-38
Configuring Fast Start Mode Using the CLI 5-40
Using the All Module Ports Configuration Window 5-40
Chapter 6 — Managing the Address Forwarding Table 6-1
Overview 6-1
Configuring the Address Forwarding Table (AFT) 6-1
Configuring the Age Timer and Super Age Timer 6-2
Configuring the Age Timer and Super Age Timer Using the
Web Agent 6-2
Configuring the Age Timer and Super Age Timer Using the
CLI 6-3
Controlling Reconfiguration of AFT Sizes 6-3
Controlling Reconfiguration of AFT Sizes Using the Web
Agent 6-4
Controlling Reconfiguration of AFT Sizes Using the CLI 6-8
Searching the Switch AFT 6-8
Searching the Switch AFT Using the Web Agent 6-8
Searching the Switch AFT Using the CLI 6-12
Adding Entries to the AFT Manually 6-13
Adding Entries to the AFT Manually Using the Web Agent 6-
13
Adding Entries to the AFT Manually Using the CLI 6-14
Chapter 7 — Configuring Redundancy Options 7-1
Overview 7-1
Configuring Redundant Hardware 7-2
Installing Redundant Hardware 7-4
Enabling Redundant Hardware 7-5
Enabling Redundant Hardware Using the Web Agent 7-5
Replacing the Primary Controller 7-6
Replacing an Element 7-7
Enabling a Replaced Element Using the Web Agent 7-8
Enabling a Replaced Element Using the CLI 7-8
Configuring a Redundant CPU 7-9
Configuring a Redundant CPU Using the Web Agent 7-9
Configuring a Redundant CPU Using the CLI 7-9
Synchronizing the Primary and Redundant CPUs 7-10
Synchronizing the Primary and Redundant CPUs Using the
Web Agent 7-10
Synchronizing the Primary and Redundant CPUs Using the
CLI 7-11
Chapter 8 — Configuring DNS and RADIUS Clients 8-1
Overview 8-1
Configuring a Domain Name System Client 8-1

x
Cajun P550R/P880/P882 Switch User Guide
Configuring a DNS Client Using the Web Agent 8-2
Configuring a DNS Client Using the CLI 8-3
Configuringa RemoteAuthenticationDial-In UserService(RADIUS)
Client 8-3
Configuring a RADIUS Client Using the Web Agent 8-4
Configuring a RADIUS Client Using the CLI 8-5
Chapter 9 — Configuring IP Routing 9-1
Overview 9-1
Configuring Internet Protocol (IP) Global Routing 9-1
Creating an IP Interface 9-2
Creating an IP Interface Using the Web Agent 9-2
Creating an IP Interface Using the CLI 9-8
Enabling IP Routing 9-8
Enabling IP Routing Using the Web Agent 9-8
Creating an IP Interface Using the CLI 9-10
Configuring IP Routing on the Switch 9-10
Hardware Requirements for Routing 9-11
Minimum IP Routing Configuration Requirements 9-11
Routing Configuration Quickstart 9-11
Assigning IP Interfaces to the VLAN 9-12
IP Multinetting 9-12
Creating a Multinet Interface 9-13
Configuring Access Lists 9-14
Creating Standard Access Rules 9-14
Creating Extended Access Rules 9-16
Activating Access Lists 9-22
Activating Access Lists Using the Web Agent 9-22
Activating Access Lists Using the CLI 9-23
Creating IP Static Routes 9-23
Creating IP Static Routes Using the Web Agent 9-23
Creating IP Static Routes Using the CLI 9-24
Creating IP Static ARP Entries 9-24
Creating IP Static ARP Entries Using the Web Agent 9-24
Creating IP Static ARP Entries Using the CLI 9-26
Creating a BOOTP/DHCP Server Entry 9-26
CreatingaBOOTP/DHCP Server EntryUsingtheWebAgent
9-26
Creating a BOOTP/DHCP Server Entry Using the CLI 9-27
IP Multicast 9-27
Configuring IGMP 9-28
Globally Enabling IGMP Using the Web Agent 9-29
Globally Enabling IGMP Using the CLI 9-30
Modifying IGMP Interfaces Using the Web Agent 9-30
Modifying IGMP Interfaces Using the CLI 9-32
Configuring and Modifying Distance Vector Multicast Routing
Protocol (DVMRP) 9-33
Configuring the DVMRP Global Configuration Using the

xi Cajun P550R/P880/P882 Switch User Guide
Web Agent 9-33
Configuring the DVMRP Global Configuration Using the CLI
9-36
Modifying a DVMRP Interface 9-36
Modifying the DVMRP Interface Using the Web Agent 9-36
Modifying the DVMRP Global Configuration Using the CLI
9-38
Monitoring Switch Performance Using IP Statistics 9-38
Displaying Global IP Routing Statistics 9-38
Displaying Global IP Routing Statistics Using the Web Agent
9-38
Displaying Global IP Routing Statistics Using the CLI 9-44
Searching the IP Routing Table 9-44
Displaying the IP Routing Table Statistics 9-46
Searching the IP ARP Cache 9-47
IP Multicast Statistics 9-48
Displaying IGMP Global Statistics Using the Web Agent 9-49
Displaying IGMP Global Statistics Using the CLI 9-50
Displaying IGMP Interface Statistics 9-50
Displaying IGMP Interface Statistics Using the Web Agent 9-
50
Displaying IGMP Interface Statistics Using the CLI 9-52
Displaying the Multicast Group Table 9-52
Displaying the IGMP Local Multicast Forwarding Cache 9-53
Displaying DVMRP Global Statistics 9-54
Displaying DVMRP Interface Statistics 9-56
Displaying DVMRP Neighbor Router(s) 9-58
Displaying DVMRP Routing Table Statistics 9-59
Displaying the DVMRP Route Table 9-60
Displaying the DVMRP Upstream Routers 9-61
Displaying the DVMRP Designated Forwarder(s) Table 9-62
Displaying the DVMRP Downstream Dependent Router(s)
9-62
Displaying the DVMRP Multicast Forwarding Cache 9-63
Configuring Virtual Redundant Router Protocol (VRRP) 9-67
Globally Enabling VRRP 9-67
Globally Enabling VRRP Using the Web Agent 9-67
Globally Enabling VRRP Using the CLI 9-68
Enabling VRRP on an Interface 9-69
Enabling VRRP on an Interfere Using the Web Agent 9-69
Enabling VRRP on an Interface Using the Web Agent 9-70
Creating a VRRP Virtual Router 9-70
Creatinga VRRPVirtualRouterRouterUsingtheWeb Agent
9-70
Creating a VRRP Virtual Router Router Using the CLI 9-72
Displaying VRRP Statistics 9-72
Displaying VRRP Router Statistics using the Web Agent 9-72
Displaying VRRP Router Statistics using the CLI 9-73
Configuring ICMP Router Discovery Protocol (IRDP) 9-74

xii
Cajun P550R/P880/P882 Switch User Guide
Enabling IRDP on an Interface 9-74
Enabling IRDP on an Interface Using the Web Agent 9-74
Enabling IRDP on an Interface Using the CLI 9-77
Configuring Lightweight Directory Access Protocol (LDAP) 9-77
Configuring LDAP Settings 9-78
Configuring LDAP Settings from the Web Agent 9-78
Configuring LDAP Settings from the CLI 9-79
Viewing LDAP Statistics Using the Web Agent 9-80
Viewing LDAP Statistics Using the CLI 9-81
Configuring a Static Route for the PPP Console 9-81
Configuring the IP Interface for the PPP Console 9-83
Configuring the IP Interface for the PPP Console Using the
Web Agent 9-83
Configuring the IP Interface for the PPP Console Using the
CLI 9-85
Chapter 10 — Configuring the Routing Information Protocol (RIP) 10-1
Overview 10-1
Configuring RIP on the Switch 10-1
Configuring RIP on the Switch Using the Web Agent 10-1
Configuring RIP on the Switch Using the CLI 10-3
Modifying RIP Interfaces 10-3
Modifying RIP Interfaces Using the Web Agent 10-3
Modifying RIP Interfaces Using the CLI 10-5
Creating Trusted RIP Neighbors 10-6
Creating Trusted RIP Neighbors Using the Web Agent 10-6
Creating Trusted RIP Neighbors Using the CLI 10-7
Viewing RIP Statistics 10-7
Viewing RIP Statistics Using the Web Agent 10-7
Viewing RIP Statistics Using the CLI 10-8
Chapter 11 — Configuring the OSPF Routing Protocol 11-1
Overview 11-1
Configuring Open Shortest Path First (OSPF) 11-1
Configuring the OSPF Global Configuration 11-2
Configuring OSPF Globally Using the Web Agent 11-2
Configuring OSPF Globally Using the CLI 11-3
Creating OSPF Areas 11-4
Creating OSPF Areas Using the Web Agent 11-4
Creating OSPF Areas Using the CLI 11-5
Deleting OSPF Areas 11-6
Deleting an OSPF Area Using the Web Agent 11-6
Deleting an OSPF Area Using the CLI 11-6
Modifying OSPF Areas 11-6
Modifying an OSPF Area Using the Web Agent 11-6
Modifying an OSPF Area Using the CLI 11-6
Modifying OSPF Interfaces 11-7
Modifying OSPF Interfaces Using the Web Agent 11-7

xiii Cajun P550R/P880/P882 Switch User Guide
Modifying OSPF Interfaces Using the CLI 11-9
Creating OSPF Virtual Links 11-9
Creating OSPF Virtual Links Using the Web Agent 11-9
Creating OSPF Virtual Links Using the CLI 11-11
Deleting OSPF Virtual Links 11-12
Deleting OSPF Virtual Links Using the Web Agent 11-12
Deleting OSPF Virtual Links Using the CLI 11-12
Modifying OSPF Virtual Links 11-12
Modifying OSPF Virtual Links Using the Web Agent 11-12
Modifying OSPF Virtual Links Using the CLI 11-13
Creating OSPF Summaries 11-13
Creating OSPF Summaries Using the Web Agent 11-13
Creating OSPF Summaries Using the CLI 11-14
Deleting OSPF Summaries 11-15
Deleting OSPF Summaries Using the Web Agent 11-15
Deleting OSPF Summaries Using the CLI 11-15
Modifying OSPF Summaries 11-15
Modifying OSPF Summaries Using the Web Agent 11-15
Modifying OSPF Summaries Using the CLI 11-16
Monitoring Switch Performance Using OSPF Statistics 11-16
Displaying OSPF Statistics 11-16
Displaying OSPF Statistics Using the Web Agent 11-16
Displaying OSPF Statistics Using the CLI 11-18
Displaying OSPF Links 11-18
Displaying OSPF Links Using the Web Agent 11-19
Displaying OSPF Links Using the CLI 11-19
Displaying OSPF Neighbors 11-20
Displaying OSPF Neighbors Using the Web Agent 11-20
Displaying OSPF Neighbors Using the CLI 11-22
Searching the OSPF Link State Database 11-22
Searching the OSPF Link State Database Using the Web
Agent 11-23
Searching the OSPF Link State Database Using the CLI 11-28
Chapter 12 — Configuring IPX Routing 12-1
Overview 12-1
Internetwork Packet Exchange (IPX) Protocol Overview 12-1
IPX Datagram Structure 12-2
Configuring the Cajun Switch as an IPX Router 12-4
Hardware Requirements 12-4
Configuring IPX Routing Globally 12-4
Configuring IPX Routing Globally Using the Web Agent 12-4
Configuring IPX Routing Globally Using the CLI 12-5
Configuring IPX Interfaces 12-6
Configuring an IPX Interface Using the Web Agent 12-6
Configuring an IPX Interface Using the CLI 12-9
Creating IPX Static Routes 12-9
Creating IPX Static Routes Using the Web Agent 12-9

xiv
Cajun P550R/P880/P882 Switch User Guide
Creating IPX Static Routes Using the CLI 12-11
Deleting IPX Static Routes 12-11
Deleting IPX Static Routes Using the Web Agent 12-11
Deleting IPX Static Routes Using the CLI 12-11
Modifying IPX Static Routes 12-12
Modifying IPX Static Routes Using the Web Agent 12-12
Modifying IPX Static Routes Using the CLI 12-12
Creating IPX Static Services 12-13
Creating IPX Static Services Using the Web Agent 12-13
Creating IPX Static Services Using the CLI 12-14
Deleting IPX Static Service 12-15
Deleting IPX Static Service Using the Web Agent 12-15
Deleting IPX Static Service Using the CLI 12-15
Modifying IPX Static Service 12-15
Modifying IPX Static Service Using the Web Agent 12-15
Modifying IPX Static Service Using the CLI 12-16
Monitoring Your Switch Using IPX 12-16
Examine IPX Global Statistics 12-16
Examine IPX Global Statistic Using the Web Agent 12-16
Examine IPX Global Statistic Using the CLI 12-18
Search the IPX Route Table 12-19
Examine the IPX Route Table 12-20
Examine IPX Route Table Statistics 12-21
Search the IPX Service Table 12-21
Examine the IPX Service Table 12-23
Examine IPX Service Table Statistics 12-24
Chapter 13 — Configuring IPX RIP Protocol 13-1
Overview 13-1
Configuring Internetwork Packet Exchange (IPX) Routing Inter-
face Protocol (RIP) Interfaces 13-1
Configuring IPX RIP Interfaces Using the Web Agent 13-1
Configuring IPX RIP Interfaces Using the CLI 13-3
Creating and Modifying IPX RIP Filters 13-3
Creatingand ModifyingIPXRIP FiltersUsingtheWebAgent
13-3
Creating and Modifying IPX RIP Filters Using the CLI 13-7
Chapter 14 — Configuring IPX SAP Protocol 14-1
Overview 14-1
Configuring Internetwork Packet Exchange (IPX) Service Adver-
tising Protocol (SAP) Interfaces 14-1
Configuring IPX SAP Interfaces Using the Web Agent 14-1
Configuring IPX SAP Interfaces Using the CLI 14-3
Creating IPX SAP Filters 14-4
Creating IPX SAP Name Filters 14-4
Creating IPX SAP Name Filters Using the Web Agent 14-4
Creating IPX SAP Name Filters Using the CLI 14-7

xv Cajun P550R/P880/P882 Switch User Guide
Creating IPX SAP Network Filters 14-8
Creating IPX SAP Network Filters Using the Web Agent 14-8
Creating IPX SAP Network Filters Using the CLI 14-12
Interpreting IPX SAP Interface Statistics 14-12
Interpreting IPX SAP Interface Statistics Using the Web
Agent 14-12
Interpreting IPX SAP Interface Statistics Using the CLI 14-13
Chapter 15 — Configuring AppleTalk Routing 15-1
Overview 15-1
AppleTalk Routing Overview 15-1
Configuring AppleTalk Routing 15-2
Enabling AppleTalk Global Routing 15-3
Creating an AppleTalk Routing Interface 15-3
Creating an AppleTalk Routing Interface Using the Web
Agent 15-3
Creating an AppleTalk Routing Interface Using the CLI 15-7
Editing AppleTalk Interfaces 15-7
Editing AppleTalk Interfaces Using the Web Agent 15-7
Editing AppleTalk Interfaces Using the CLI 15-9
Deleting an AppleTalk Interface 15-9
Deleting an AppleTalk Interface Using the Web Agent 15-9
Deleting an AppleTalk Interface Using the CLI 15-9
Creating an AppleTalk Static Route 15-10
Creating an AppleTalk Static Route Using the Web Agent 15-
10
Creating an AppleTalk Static Route Using the CLI 15-11
Editing AppleTalk Static Routes 15-12
Editing AppleTalk Static Routes Using the Web Agent 15-12
Editing AppleTalk Static Routes Using the CLI 15-12
Deleting an AppleTalk Static Route 15-13
Deleting an AppleTalk Static Route Using the Web Agent 15-
13
Deleting an AppleTalk Static Route Using the CLI 15-13
Creating an AppleTalk Name-Binding Protocol (NBP) Filter 15-
13Creating a NBP Filter Using the Web Agent 15-14
Creating a NBP Filter Using the CLI 15-15
Editing an AppleTalk NBP Filter 15-16
Editing an AppleTalk NBP Filter Using the Web Agent 15-16
Editing an AppleTalk NBP Filter Using the CLI 15-16
Adding or Deleting Interfaces to an NBP Filter 15-17
Addingor DeletingInterfacestoanNBPFilterUsing theWeb
Agent 15-17
Adding or Deleting Interfaces to NBP Filter Using the CLI 15-
18
Creating an AppleTalk Zone Filter 15-18
Creating an AppleTalk Zone Filter Using the Web Agent 15-

xvi
Cajun P550R/P880/P882 Switch User Guide
18
Creating an AppleTalk Zone Filter Using the CLI 15-19
Editing an AppleTalk Zone Filter 15-20
Editing an AppleTalk Zone Filter Using the Web Agent 15-
20
Editing an AppleTalk Zone Filter Using the CLI 15-20
Adding or Deleting Interfaces to a Zone Filter 15-21
AddingorDeletingInterfaces to a Zone Filter Using the Web
Agent 15-21
Adding or Deleting Interfaces to a Zone Filter Using the CLI
15-22
Viewing AppleTalk Statistics 15-22
Viewing AppleTalk Global Statistics 15-23
Viewing AppleTalk Global Statistics Using the Web Agent
15-23
Viewing AppleTalk Global Statistics Using the CLI 15-25
Viewing the AppleTalk Interface Statistics Table 15-26
Viewing the AppleTalk Interface Statistics Table Using the
Web Agent 15-26
Viewing the AppleTalk Interface Statistics Table Using the
CLI 15-27
Viewing the AppleTalk Route Table 15-27
Viewing the AppleTalk Route Table Using the Web Agent
15-27
Viewing the AppleTalk Interface Statistics Table Using the
CLI 15-29
Viewing AppleTalk Route Table Statistics 15-29
Viewing AppleTalk Route Table Statistics Using the Web
Agent 15-29
Viewing AppleTalk Route Table Statistics Using the CLI 15-
30
Viewing the AppleTalk ARP Cache Table 15-30
Viewing the AppleTalk ARP Cache Table Using the Web
Agent 15-30
Viewing the AppleTalk ARP Cache Table Using the CLI 15-
31
Viewing the AppleTalk Zone Table 15-32
Viewing the AppleTalk Zone Table Using the Web Agent 15-
32
Viewing the AppleTalk Zone Table Using the CLI 15-32
Viewing AppleTalk Zone Table Statistics 15-33
Viewing AppleTalk Zone Table Statistics Using the Web
Agent 15-33
Viewing AppleTalk Zone Table Statistics Using the CLI 15-33
Viewing the AppleTalk NBP Table 15-34
Viewing the AppleTalk NBP Table Using the Web Agent 15-
34
Viewing the AppleTalk NBP Table Using the CLI 15-34

xvii Cajun P550R/P880/P882 Switch User Guide
Chapter 16 — Managing Intelligent Multicasting 16-1
Overview 16-1
Introduction 16-1
Layer 3 Dynamic Intelligent Multicasting 16-2
IGMP Snooping 16-3
LGMP Server 16-3
Layer 2 Dynamic Intelligent Multicasting 16-3
LGMP Client 16-3
CGMP Snooping 16-3
Pruning Dynamic Sessions, Client Ports, and Router Ports
16-4
Configuring Intelligent Multicasting 16-4
Configuring Global Intelligent Multicasting 16-5
Configuring Global Intelligent Multicasting Using the Web
Agent 16-5
Configuring Global Intelligent Multicasting Using the CLI
16-7
Displaying Router Ports 16-7
Displaying Router Ports Using the Web Agent 16-7
Displaying Router Ports Using the CLI 16-8
Configuring Static Router Ports 16-8
Configuring Static Router Ports Using the Web Agent 16-8
Configuring Static Router Ports Using the CLI 16-9
Searching for Intelligent Multicast Sessions 16-9
Searching for Intelligent Multicast Sessions Using the Web
Agent 16-9
Searching for Intelligent Multicast Sessions Using the CLI
16-12
Deleting an Intelligent Multicast Session 16-12
Deleting an Intelligent Multicast Session Using the Web
Agent 16-12
Deleting a Multicast Session Using the CLI 16-12
Deleting a Multicast Session Client Port 16-13
Deleting a Multicast Session Client Port Using the Web
Agent 16-13
Deleting a Multicast Session Client Port Using the CLI 16-13
Creating a Static Multicast Session 16-14
Creating a Static Multicast Session Using the Web Agent 16-
14
Creating a Static Multicast Session Using the CLI 16-15
Deleting Static Multicast Sessions 16-16
Deleting Static Multicast Sessions Using the Web Agent 16-
16
Deleting Static Multicast Sessions Using the CLI 16-17
Creating Static Client Ports 16-17
Creating Static Client Ports Using the Web Agent 16-17
Creating Static Client Ports Using the CLI 16-18
Deleting Static Client Ports 16-18

xviii
Cajun P550R/P880/P882 Switch User Guide
Deleting Static Client Ports Using the Web Agent 16-18
Deleting Static Client Ports Using the CLI 16-18
ConfiguringInternet Group Management Protocol (IGMP) Snooping
(Multilayer only) 16-18
Enabling IGMP Snooping 16-19
Enabling IGMP Snooping Using the Web Agent 16-19
Enabling IGMP Snooping Using the CLI 16-19
Configuring IGMP Snooping 16-20
Configuring IGMP Snooping Using the Web Agent 16-20
Configuring IGMP Snooping Using the CLI 16-21
Configuringthe Lucent Group Management Protocol (LGMP) Server
16-21
Enabling the LGMP Server 16-21
Enabling the LGMP Server Using the Web Agent 16-22
Enabling the LGMP Server Using the CLI 16-23
Configuring the LGMP Server 16-23
Configuring the LGMP Server Using the Web Agent 16-23
Configuring the LGMP Server Using the CLI 16-26
Modifying the LGMP Server Display per VLAN 16-26
Modifying the LGMP Server Display per VLAN Using the
Web Agent 16-26
Modifying the LGMP Server Display per VLAN Using the
Web Agent 16-28
Configuring/Viewing an LGMP Client 16-29
Enabling/Viewing an LGMP Client Using the Web Agent 16-
29
Enabling/Viewing an LGMP Client Using the CLI 16-31
Modifying LGMP Clients Per VLAN 16-31
Modifying LGMP Clients Per VLAN Using the Web Agent
16-31
Modifying LGMP Clients Per VLAN Using the CLI 16-33
Enabling/Viewing Cisco Group Management Protocol (CGMP)
Snooping 16-33
Enabling/Viewing CGMP Snooping Using the Web Agent
16-33
Enabling/Viewing CGMP Snooping Using the CLI 16-35
Chapter 17 — Monitoring the Cajun Switch 17-1
Overview 17-1
Interpreting Front Panel LED Displays 17-1
Checking Temperature Status and Configuring Thresholds 17-2
Checking Temperature Status and Configuring Thresholds 17-2
Checking Temperature Status and Configuring Thresholds
Using the Web Agent 17-3
Checking Temperature Status and Configuring Thresholds
Using the CLI 17-4
Checking Active Alarms 17-5
Viewing the Active Alarm Table 17-5

xix Cajun P550R/P880/P882 Switch User Guide
Viewing the Active Alarm Table Using the Web Agent 17-5
Viewing the Active Alarm Table Using the CLI 17-6
Using the Event Subsystem 17-7
Configuring the Protocol Event Log 17-7
Configuring the Protocol Event Log Using the Web Agent
17-7
Configuring the Protocol Event Log Using the CLI 17-10
Viewing the Event and Shutdown Logs 17-10
Viewingthe EventandShutdownLogsUsing theWebAgent
17-10
Viewing the Event and Shutdown Logs Using the CLI 17-12
Viewing Event Statistics 17-13
Viewing Event Statistics Using the Web Agent 17-13
Viewing Event Statistics Using the CLI 17-14
Setting Log Size 17-14
Setting Log Size Using the Web Agent 17-14
Setting Log Size Using the CLI 17-16
Configuring Event Notification 17-16
Configuring Event Notification Using the Web Agent 17-16
Configuring Event Notification Using the CLI 17-17
Chapter 18 — Monitoring and Configuring the Forwarding Cache 18-1
Overview 18-1
Configuring the Fowarding Cache 18-1
Configuring the Forwarding Cache Using the Web Agent
18-1
Configuring the Fowarding Cache Using the CLI 18-4
Monitoring the Forwarding Cache Statistics 18-5
Displaying Frame Fowarding Statistics 18-5
Displaying Frame Fowarding Statistics Using the Web Agent
18-5
Displaying Frame Fowarding Statistics Using the CLI 18-7
Searching the Routing Cache for an Entry 18-7
Searching the Routing Cache for an Entry Using the Web
Agent 18-7
Searching the Routing Cache for an Entry Using the CLI 18-
9
Displaying the Forwarding Cache 18-10
Displaying the Forwarding Cache Using the Web Agent 18-
10
Displaying the Forwarding Cache Using the CLI 18-12
Chapter 19 — Analyzing Network Performance Using RMON and
Ethernet Statistics 19-1
Overview 19-1
Viewing Network Statistics 19-1
Viewing Network Statistics Using the Web Agent 19-1

xx
Cajun P550R/P880/P882 Switch User Guide
Viewing Network Statistics Using the CLI 19-7
Setting Up a Mirror Port 19-8
Setting Up a Mirror Port Using the Web Agent 19-8
Setting Up a Mirror Port Using the CLI 19-12
Chapter 20 — Tuning Your Switch Performance 20-1
Overview 20-1
How Queues Work 20-1
Managing Buffers and Queues 20-2
Managing Buffers and Queues Using the Web Agent 20-2
Managing Buffers and Queues Using the CLI 20-7
Appendix A — Downloading New Operational Code to the Switch A-1
Overview A-1
Upgrading from a Previous Version A-1
Saving the Previous Configuration A-2
Saving the Previous Configuration Using the Web Agent A-2
Saving the Previous Configuration Using the CLI A-3
Downloading a Software Image A-3
Downloading a Software Image Using the Web Agent A-3
Downloading a Software Image Using the CLI A-4
Selecting the Image for Reboot A-4
Selecting the Image for Reboot Using the Web Agent A-4
Selecting the Image for Reboot Using the CLI A-5
Resetting the Switch A-6
Resetting the Switch Using the Web Agent A-6
Resetting the Switch Using the CLI A-6
Appendix B — Boot Mode B-1
Accessing BOOT Mode B-1
Accessing BOOT Mode During Power Up B-1
Accessing BOOT Mode with Corrupted Operational Images B-2
Password Recovery B-3
Downloading New Operational Code B-3
Appendix C — Supported MIB Groups C-1
Management Information Bases (MIBs) Supported by Layer 2 and
Multilayer Switches C-1
IPX Interface MIBs C-1
Private IPX Interface MIBs C-1
Prominet MIB C-1
IEEE 802.3 MAU Management C-2
IEEE 802.3 Statistics Group C-2
Bridge MIB C-2
SNMPv2 C-2
RMON C-2

xxi Cajun P550R/P880/P882 Switch User Guide
MIBs Supported by the Multilayer Switch C-2
RIP Version 1.0 and 2.0 C-2
Standard MIB C-2
Private MIB C-2
OSPF Version 2.0 C-2
Standard MIB C-2
Private MIB C-3
VRRP C-3
Standard MIB C-3
Private MIB C-3
IGMP C-3
Standard MIB C-3
Private MIB C-3
IP Interface C-3
IP Version 4.0 and Services C-3
Standard MIB C-3
Private MIB C-3
IP Forwarding/Route Table C-4
Standard MIB C-4
Private MIB C-4
DVMRP C-4
Standard MIB C-4
Private MIB C-4
AppleTalk C-4
Standard MIB C-4
Private MIB C-4
IP Access List C-4
Policy Capability MIB for LDAP C-4
Load MIB Overview C-4
The genOperations group C-5
The genApplication Group C-5
MIB Specifications C-5
Appendix D — FCC Notice D-1