Avdel Textron Genesis G1 User manual

1 07003-00277 'O' Ring
2 07003-00342 'O' Ring
3 71210-20311 Spring Cover
4 71210-20312 'U' Spring
5 71210-20313 Nose Case Adaptor
6 71200-20330 'T' Adaptor
7 71210-20316 Quick Release Nose Casing
8 07003-00349 'O' Ring
9 71210-20320 Nose Equipment Cartridge
(see items 10 to 18)
19 71200-20311 Vacuum Tube
QUICK RELEASE NOSE ASSEMBLY 71200-20310 NOSE EQUIPMENT CARTRIDGE 71200-20320
Textron Fastening Systems Limited
Mundells, Welwyn Garden City, Hertfordshire AL7 1EZ United Kingdom
Telephone [phone] Facsimile [phone]
Genesis G1
Quick Release Nose Equipment
QUICK RELEASE NOSE ASSEMBLY 71200-20310
NOSE EQUIPMENT CARTRIDGE 71200-20320
19
97654 38
12
15 14 12
10 11 13 16 17 18
10 71200-15001 Jaw
11 07340-00304 Jaw Housing
12 07003-00349 'O' Ring
13 07498-004301 Spring
14 71210-05001 Buffer
15 71200-20312 Jaw Spreader
16 07003-00277 'O' Ring
17 71210-20321 Jaw Spreader Housing 'T'
18 71210-20322 Detent Sleeve

TO REMOVE THE NOSE CASING
Textron Fastening Systems Limited
Mundells, Welwyn Garden City, Hertfordshire AL7 1EZ United Kingdom
Telephone [phone] Facsimile [phone]
© TEXTRON FASTENING SYSTEMS 07900-00817 JANUARY 2002
Genesis G1
Quick Release Nose Equipment
(Spanner flats on the Quick Release Nose Casing (item 7) and Nose Case Adaptor Assembly (items 2, 3, 4, 5 and 8) should be aligned.)
1. Rotate Quick Release Nose Casing (item 7) through 90°. Pull Quick Release Nose Casing (item 7) out of the Nose Case Adaptor
Assembly (items 2, 3, 4, 5 and 8)
2. The Nose Equipment Cartridge (item 9) is removed by sliding in a plane normal to the Piston.
TO REPLACE THE NOSE CASING
1. Align the spanner flats on the Quick Release Nose Casing (item 7) with the flats on the Nose Case Adaptor (item 5).
2. Push Quick Release Nose Casing (item 7) into Nose Case Adaptor Assembly (items 2, 3, 4, 5 and 8).
TO ASSEMBLE QUICK RELEASE NOSE EQUIPMENT TO G1 TOOL (71200-02000)
(Refer to 71200-02000s Drawing or G1 Instruction Manual.)
1. Remove Jaw Spreader Housing (71200-02016).
2. Insert Vacuum Tube (item 19) into front of Piston (71200-02120).
3. Screw 'T' Adaptor (item 6) and 'O' Ring (item 1). Fully tighten 'T' Adaptor onto Piston (71200-02120) before locking in position
with Locknut (07002-00154).
4. Push Quick Release Nose Case Adaptor Assembly (items 2, 3, 4, 5 and 8) over 'T' Adaptor (item 6) and screw into front of tool.
5. The Nose Equipment Cartridge Assembly (item 9) is assembled onto the 'T' Adaptor (item 6) by sliding in a plane normal to the
Piston.
6. Align the spanner flats on the Quick Release Nose Casing (item 7) with the flats on the Nose Case Adaptor (item 5).
7. Push Quick Release Nose Casing (item 7) into the Nose Case Adaptor Assembly (items 2, 3, 4, 5 and 8).
SPANNER FLATS ALIGNED
(LOCKED POSITION) NOSE EQUIPMENT CARTRIDGE (9)
NOSE CASE ADAPTOR ASSEMBLY 'T' ADAPTOR (6) QUICK RELEASE NOSE CASING (7)