Avenview DVI-SPLITPRO-2X User manual

VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
Control Your Video
Advanced Dual Screen Multiviewer
© 2015 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Model #: DVI-SPLITPRO-2X

Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors

www.avenview.com Page
3
TABLE OF CONTENTS
1.1 IMPORTANT SAFEGUARDS
................................................................................................. 1
1.2 SAFETY INSTRUCTIONS
...................................................................................................... 1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........... 2
2. INTRODUCTION
AND FEATURES...................................................................................... 3
2.1 PACKAGE CONTENTS......................................................................................................... 4
2.2 BEFORE INSTALLATION ...................................................................................................... 5
4. APPLICATION DIAGRAM...................................................................................................... 8
5. SOFTWARE CONTROL........................................................................................................ 9
5.1 SOFTWARE INSTALLATION ....................... ................................................................ 9
SECTION 6: SPECIFICATIONS ........................................................................................................ 18
2.3 PANEL DESCRIPTION ..........................................................................................................5
2.3.1 FRONT PANEL (DVI-SPLITPRO-2X) .........................................................................5
3.2.2 REAR PANEL (DVI-SPLITPRO-2X)...............................................................................6
1. GETTING STARTED .............................................................................................................1
3. IR REMOTE CONTROL.........................................................................................................7
5.2 CONTROL INTERFACE ....................... ...................................................................... 10

www.avenview.com Page
1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
• Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•Causes external to the product, such as electric power fluctuation or failure.
•Use of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONSONS
The Avenview DVI-SPLITPRO-2X Advanced Dual Screen Video processor has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the DVI-
SPLITPRO-2X should be used with care. Read the following safety instructions to protect yourself from possible injury and to
minimize the risk of damage to the unit.
! Do not dismantle the housing or modify the module.
! Dismantling the housing or modifying the module may result in electrical shock or burn.
! Refer all servicing to qualified service personnel.
! Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
! keep the module away from liquids.
! Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
! Have the module checked by a qualified service engineer before using it again.
! Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
1. GETTING STARTED
- When the DVI-SPLITPRO-2X is switched off, 5-10 seconds is required to re-power the device again, this allows the power
capacitors to discharge and prevents any accidental damage to main board.
- The DVI-SPLITPRO-2X can be controlled with a control software compatible with Microsoft Windows 98, 2000, XP, 7, 8
RS-232 serial control.
- Before lauching control software, the connection between the computer COM port and the DVI-SPLITPRO-2X should be
established.

www.avenview.com Page
2
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE
OR POWER ADAPTER SUPPLIED. DO NOT
TAMPER WITH THE ELECTRICAL PARTS.
THIS MAY RESULT IN ELECTRICAL SHOCK
OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING
SO WILL VOID THE WARRANTY AND
CONTINUED USE OF THE PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE
TO STATIC. PLEASE ENSURE IF RACK
MOUNTED OR INSTALLED ON A SURFACE,
IT SHOULD BE IN A GROUNDED
ENVIROMENT.

www.avenview.com Page
3
2. INTRODUCTION
The DVI-SPLITPRO-2X Advanced Dual Screen Multiviewer with IR Remote Control is an advanced video processor
for most multimedia presentations. This unit is an ideal solution for applications where two video signals must be displayed on a
single display. It supports multiple types of video inputs, of which two can be outputted simultaneously with the desired display
layout through software control. The advanced video processor allows you to manipulate the output images to various sizes and
multiple positions on the desired display. This unit can controlled with the ease of the front panel buttons, IR remote and
RS232 via a cable or control system, this functionality allow the user to easily set the desired outputs by 2 preset layouts or 8
custom layouts saved by the user.
The embedded scalar converts signals from input sources to match the native resolution of monitors, flat panel displays,
projectors as well as user-selectable output settings up to Wu XGA (1920x1200). Dual outputs are provided in both analog
(VGA) and digital (DVI) or (DVI/HDMI) format, one is connected to remote display and the other is connected to on-site display
for real time monitoring.
- 2 x Dual DVI inputs and 2 x Dual DVI outputs
- INPUT Resolutions support from 640x480 to 1920x1200, interlaced or progressive
- OUTPUT Resolutions support from 640x480 to 1920x1200, progressive
- INPUT: Adjust image size & position through control software
- OUTPUT: Rotate 90,180,270 Scale, Resize, Position, Zoom, and Crop
- Supports each input on separate screen, Full Screen or Rotated
- Supports PAP Horizontal or Vertical, PIP, and
- Firmware upgradable for support of new features and technology enhancements.
- Visible borders with text labels for easy identification and colored backgrounds
- Supports video screen splitter, a video converter and a video switcher
- Software control through RS-232 and Ethernet
- 1U size
The DVI-SPLITPRO-2X features:
Rotation: 90,180,270 on any single input, the user can input manually size measurements or use the mouse via the control
software to resize and position as required.
Chromakey: This device can input 2 DVI/HDMI digital sources which are required for layering the two images or video
streams together based on color hues (chroma range). Either Input 1 is the background or Input 2 is the top image. This device
can be configured with the OSD, IR Remote, RS232 or Front Panel buttons to set the desired layout configuration.
FEATURES:

www.avenview.com Page
4
2.1 PACKAGE CONTENTS
Before you start the installation of the converter, please check the package contents.
1DVI-SPLITPRO-2XX1
6RACK MOUNTING KIT X1
8IR REMOTE
CONTROLX1
9SOFTWARE CD X1
10 AC POWER SUPPLY X1
11 USER MANUAL X1

www.avenview.com Page
5
2.2 BEFORE INSTALLATION
•Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
•Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
•Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
•Do not twist or pull by force ends of the video cable. It can cause malfunction.
2.3 PANEL DESCRIPTION
2.3.1 DVI-SPLITPRO-2X FRONT PANEL
Avenview Advanced Dual Screen Video processor (DVI-SPLITPRO-2X) has 2 inputs and accepts both graphics and video
signals, which come from any source through (HDMI/DVI) and display it simultaneously on the same screen.
Rotation: Rotate function on/off
Custom Layout 1-8
Custom layout 1-4: The light of button 4 is off.
Custom layout 1-4: The light of button 4 is always
shine.
Default Layout PAP
Horizontal PAP: The light of button 4 is off.
Vertical PAP: The light of button 4 is always shine.
1. 2.
3. 4.
5. 6.
Chroma key: Chroma key function on/off Function Selection
Source Selection Button
Window in full screen mode: The light of button 4 is
off.
Source selection: The light of button 4 is always
shine.
1234 5
67
OSD: All Windows OSD on/off
7.

www.avenview.com Page 6
PANEl DESCRIPTION
2.3.2DVI-SPLITPRO-2X REAR PANEL
The DVI input and output on the DVI-SPLITPRO-2X is also compatible with HDMI. please
see the example of the cable above to use.
Note: Cable not included with packaging contents DVI to HDMI
Dip Switch
RS-232: RS-232 control port
Power Outlet: 12V DC power jack
1. 2.
3. 4.
5. 6.
RS-232: RS-232 control port for F/W update Ethernet: Ethernet control port
Input 1-2: DVI input 1 and 2
1
2
345679
8
Output: DVI output 2
7.8.Output: DVI output 1
USB 5V
9.

www.avenview.com Page
7
3.IR REMOTE CONTROL
Avenview DVI-SPLITPRO-2X, Advanced Dual Screen processor ships with a compact IR Remote Control that allows for direct
access to most commands used to control the video processor.
IR REMOTE BUTTON DEFINE
1. F1 Reserved
2. F2 Reserved
3. F3 Reserved
4. Power on/off
5. Chroma Key Chroma key function on/off
6. label Window Label on/off
7. Default Layout 1
8. Default Layout 2
9. Custom Layout 1
10.
11.
12.
13.
14.
15.
16.
17. Full Screen Layout 1 Windows 1 in full screen
18. Full Screen layout 2 Windows 2 in full screen
19. Full Screen Layout 3 Windows 3 in full screen
20. Full Screen Layout 4 Windows 4 in full screen
21. Source Selection 1 Window 1 source selection
22. Source Selection 2 Window 2 source selection
23. Source Selection 3 Window 3 source selection
24. Source Selection 4 Window 4 source selection
Custom Layout 2
Custom Layout 3
Custom Layout 4
Custom Layout 5
Custom Layout 6
Custom Layout 7
Custom Layout 8
Custom Layout 1
Custom Layout 2
Custom Layout 3
Custom Layout 4
Custom Layout 5
Custom Layout 6
Custom Layout 7
Custom Layout 8

www.avenview.com Page
8
4. APPLICATION DIAGRAM

www.avenview.com Page
9
5. SOFTWARE CONTROL
Run the Software, a dialog box (see below) will pop-up. (under Microsoft Windows 7, please run as administrator).
Two methods of connection can be used:
1- RS-232 serial Mode: Use RS-232 to connect the port on device and computer. Select correct COM port and click "connect".
OR
2- TCP/IP Mode: Enter the device IP address and click "connect button".
Once connection between the computer and the DVI-SPLITPRO-2X is established, the Control Interface will be displayed.
1. The DVI-SPLITPRO-2X provides a software control program which runs under Microsoft Windows 98, 2000, Xp, Vista,
7 through the interface of RS-232 serial control.
2. Before you click on the icon of the software, make sure you have secured the connection between your computer COM
port and the DVI-SPLITPRO-2X.
3. Install driver for RS232 to USB adapter
4. Once DVI-SPLITPRO-2X is turned on, it display green lED light
Ensure that correct driver for RS232-USB Adapter (included with DVI-SPLITPRO- 2X ) is installed.
You can check “Device Manger” under “Ports” page to check if drivers are installed correctly.
5.1 Software Installation

www.avenview.com Page
10
5.2 Control Interface
1.
PAP Panel
Display and adjust the window size, position and different settings.

Control percent: 10~100% to set the PAP Panel display/control size.

Stretch: Fix the size ratio when the window is resizing.

Background picture: To set up the background picture of window.

Window priority

PAP mode

Window 1 in full screen
  Window2infullscreen
In addition, you can change the output layout by clicking the mouse left button. It has four different
layouts (Dual Horizontal Output, Dual Vertical Output, Single Output 1, and Single Output 2).

www.avenview.com Page
11
2. Tool Bar list:
(1) Status: Get all information of the device and update this software state.
(2) Port Setting: Pop‐up the “Port Setting” dialog, user can change the connecting way.
(3) Advance Setting: In this function, user can set the no signal color, fade in/
out effect, background picture, window text, input text, OSD border, rotation, EDID
and factory reset.


Rotation:
For Rotation function, only window 1 can be applied.

EDID:
User can learn EDID from default or display. In addition, it also provides
advance EDID function for user to edit, save and read.
www.avenview.com Page 12


Factory Reset:
Click the button to do factory default reset. This default reset process
will take about 10~15 seconds and it will be initialized all setting to original system state.
www.avenview.com Page 13

www.avenview.com Page 14
(4)  ChromaKey:Itcanturnon/offtheChromakeyfunctionandadjustthe
parametersof Chroma key.
(5) Crop function: This function is used to crop or clip an image.

www.avenview.com Page 15
In the Preview Crop, it can preview the range and effect of video crop with the adjustment.
Crop Enable: Enable crop function
Array Enable: Enable array parameter
The setup diagram is shown as below.
Percent Enable: Allows user to adjust video layout size by percentage concept.
The setup diagram is shown as below.
Pixel Enable: Allow user to adjust video layout size by pixels.
The video crop by pixel and percent are almost same. The differences come
from the adjustment ratio.
(6) Version: Read the software and firmware version.

www.avenview.com Page 16
3. Output Resolution:
Set the output resolution. When setting the different resolutions, the parameters of
PAP and custom layout (position and size) will accordingly change.
4. Default layout and Custom layout:
Default layout: Use factory preloaded video layouts.
 Customlayout:Usecustompre‐savedvideolayouts
In this part, you can adjust the size and position of output screen. If you want to save the
layout, please click the right button of mouse to save this layout into device.

www.avenview.com Page 17
5. Window selection and input mapping
For each display window, user can assign arbitrary video input here.
6. Window setting
In here, you can adjust the size, position or other settings of the specified window.