Avenview SW-HDSDI-8X1 User manual

www.avenview.com
1
8 Port HD/SD-SDI Switch
Model #: SW-HDSDI-8X1
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.

www.avenview.com
2
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 3
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4 Introduction ........................................................................................................................... 4
1.5 Package Contents................................................................................................................... 4
1.6 Before Installation.................................................................................................................. 5
1.7 Panel Description................................................................................................................... 6
1.8 Installation ............................................................................................................................. 7
1.9 Operation and IR Control....................................................................................................... 7
Section 2: Specifications......................................................................................................................... 8

www.avenview.com
3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
The SW-HDSDI-8X1, 8 Port HD/SD-SDI Switch has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic equipment’s, the
SW-HDSDI-8X1 should be used with care. Read the following safety instructions to protect yourself from
possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.

www.avenview.com
4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview SW-HDSDI-8X1, 8 Port HD/SD-SDI Switch receives, equalizes 8 SDI inputs, perfectly switches the
desired input to SDI equipped monitors or receivers. The switch supports both HD/SD-SDI bit rates, and the
re-transmits video signal without degradation. Through RS-232, IR remote, or front panel push button, the
control of the SDI switch becomes versatile and easier. SW-HDSDI-8X1 offers the most convenient and cost
effective means for swift switch and duplication of high quality SDI in the market.
-HD/SD-SDI Switch
-8 equalized SDI inputs
-Dual color LED indication of HD/SD of the output SDI
-Automatic detection of the SDI input
-SYNC IN/OUT
-Low cost 8X1 HD/SD (dual rate) Switch with Dual Outputs (Splitter)
-Provides the equalized transmission path up to 300m (1000 feet) for HD cases
-Multiple control by RS232, IR remote, and push button
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
-SW-HDSDI-8X1 x 1
-Power Adapter (+5VDC) x 1
-IR Remote Control x 1
-User’s Manual x 1

www.avenview.com
5
1.6 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com
6
1.7 Panel Description
FRONT PANEL
1. Inputs LED
2. Input Auto Detection LED
3. Output HD/SD Detection LED
4. IR Remote
5. Power indicator LED
6. Push button for Input Channel Switch
REAR PANEL
7. Power Switch
8. 5V DC Power Jack
9. SYNC Signal Input
10. SDI Output
11. SYNC Signal Loop Out (add 75Ω
terminator if nothing connected)
12. SDI Input

www.avenview.com
7
1.8 Installation
To setup Avenview SW-HDSDI-8X1 follow these steps for connecting to a device:
1. Connect SDI enable equipment’s to the output of SW-HDSDI-8X1
2. Connect the SDI input sources to the inputs of SW-HDSDI-8X1
3. Plug power adapter cable into 5V DC power jack of SW-HDSDI-8X1
4. Use IR Remote, RS232 or front panel push button to switch between inputs.
1.9 Operation and IR Control
Channel 1
Channel 2
F1
Channel 3
F2
Channel 4
F3
Channel 5
F4
Channel 6
F5
Channel 7
F6
Channel 8
a. Use or keys to select input source, and
wait a few seconds for video of next channel coming out after
the channel switch command is sent.

www.avenview.com
8
Section 2: Specifications
Item
Description
Units
SW-HDSDI-8X1
Unit Description
8 Port HD/SD-SDI Switch
SDI Standards
HD-SDI, SD-SDI
Auto HD/SD-SDI
Detection
Yes
Supported Protocols
SMPTE 259M / SMPTE 292M
Video Bandwidth
Single Link: 1.485Gbps & 1.485/1.001 Gbps
Data Rates
143 / 270 / 1483 / 1485 Mbps
Video Support
HD:720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30
SD:[email protected], PAL@50Hz
Output Impedance
75Ω
Cable Equalization
HD-SDI: up to 150m (500 feet)
SD-SDI: up to 300m (1000 feet)
Loop Out
Synchronized BNC Loop Out at Input and Output
Audio Support
Yes
RP-918 Pathological
Patterns
Immune
Input
8 x BNC (SDI)
Output
1 x BNC (SDI
BNC Connector
75ΩInter-Locked Socket
Eye Pattern
Characteristics
Amplitude: Within 800mV ±3% (<10%)
Rise overshoot: Less than 2% (<10%)
Fall overshoot: Less than 2% (<10%)
Long time jitter: 0.195μ(<1.0μ)
Timing jitter: 0.195μ(<1.0μ)
Alignment jitter: 0.127μ(<0.2μ)
Dimensions (L x W x H)
7.4” x 4.9” x 1.7”
Power Supply
5V 4A DC
Power Consumption
10 Watt (max)
Environmental
Operating Temperature
32˚~ 104˚F (0˚to 40˚C)
Storage Temperature
-4˚~ 140˚F (-20˚~ 60˚C)
Relative Humidity
20~90% RH (no condensation)

www.avenview.com
9
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.