HIK VISION DS-3WF01C-2N User manual

DS-3WF01C-2N Quick Start Guide
i
DS-3WF01C-2N
Quick Start Guide

DS-3WF01C-2N Quick Start Guide
i
Quick Start Guide
COPYRIGHT © 2019 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to DS-3WF01C-2N (Product Series).
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE
USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

DS-3WF01C-2N Quick Start Guide
ii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at
his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed
of as unsorted municipal waste in the European Union. See the product documentation
for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

DS-3WF01C-2N Quick Start Guide
iii
Applicable Models
This manual is applicable to switches below: DS-3WF01C-2N (product series).
Symbol Conventions
The symbols that may be found in this document are defined as follows.
During the installation and utilization of the device, please strictly conform to electrical safety
rules in different nations and regions.
You shall acknowledge that the use of the device with Internet access might be under network
security risks, please strengthen protection for your personal information and data security. If
you find the device might be under network security risks, please contact with us.
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.

DS-3WF01C-2N Quick Start Guide
iv
Catalog
Chapter 1 Introduction ...............................................................................................................5
1.1 Overview ..................................................................................................................................5
1.2 Packing List...............................................................................................................................5
1.3 Appearance ..............................................................................................................................5
1.3.1 Front Panel ......................................................................................................................5
Chapter 2 Installation .................................................................................................................7
Chapter 3 Prepare ......................................................................................................................9
Chapter 4 Configuration ...........................................................................................................11

DS-3WF01C-2N Quick Start Guide
5
Chapter 1 Introduction
1.1 Overview
The DS-3WF01C-2N wireless bridge can be applied to elevator internal monitoring video
transmission, and can use the multi-network port to connect to the elevator advertising machine
for real-time data update.
1.2 Packing List
The packing list is shown as below. If any accessories are damaged or lost, keep the package intact
and contact your dealer for replacement.
Table 1-1 Packing List of DS-3WF01C-2N
1.3 Appearance
1.3.1 Front Panel
Front panel of DS-3WF01C-2N is shown as below.
Name
Item
Quantity
Device
DS-3WF01C-2N
2
Power Adapter
12 V, 1 A
2
Mounting Bracket
For installing device
2
Pole Mounting Straps
For installing device
4
Quick Start Guide
Instruction manual
1

DS-3WF01C-2N Quick Start Guide
6
Front Panel of DS-3WF01C-2N
Figure 1-1 DS-3WF01C-2N Front Panel
Physical Interface
The hardware interfaces of the DS-3WF01C-2N are as follows.
Figure 1-2 Physical Interface
Table 1-1 Physical Interface
Index
Description
1
Access to the camera, digital signage and other equipments
2
Access to the camera, digital signage and other equipments
3
Signal strength indicator
4
12 V DC power supply port
5
Restore default factory settings
6
PoE port connection with PoE power supply

DS-3WF01C-2N Quick Start Guide
7
Chapter 2 Installation
Step 1 First install the mounting bracket on the main unit. The supporting bracket of the device
contains a magnet to help the device automatically adsorb on the surface of the iron-containing
material.
If the surface of the mounting device does not contain iron, please install it with the plastic
ties.
Figure 2-1 Install host
Step 2 Install the AP device on top of the shaft of the elevator shaft as shown below:
Figure 2-2 Power on the device

DS-3WF01C-2N Quick Start Guide
8
Step 3 Install the CPE device on top of the elevator, as shown below:
Figure 2-3 Finish installation
The device must be installed without direct obstruction and the two devices are aligned up
and down.

DS-3WF01C-2N Quick Start Guide
9
Chapter 3 Prepare
Step 1 Use a network cable to connect the computer to the LAN interface of the device to prepare
the device. First, you need to configure the computer IP address and the device's default IP address
to be on the same network segment. Take the Windows 7 system as an example. Click the network
logo in the lower right corner of the desktop and click Open Network & Internet settings-Network
and Sharing Center. As shown below.
Figure 3-1 Network & Internet settings
Step 2 Click “Local Area Connection” on the right and click “Properties”. As shown below.
Figure 3-2 Local Area Connection

DS-3WF01C-2N Quick Start Guide
10
Step 3 Double-click Internet Protocol Version 4 (TCP/IPv4). As shown below.
Figure 3-3 Internet Protocol Version 4 (TCP/IPv4)
Step 4 Configure the IP address of the computer to be the unused 192.168.1.X address in the LAN.
X is any integer other than 35, 36 in 2 to 253. The subnet mask is 255.255.255.0. Click "OK" as
shown below.
Figure 3-4 Configure the IP

DS-3WF01C-2N Quick Start Guide
11
Chapter 4 Configuration
After the preparation is completed, start the device configuration.
Step 1 Make sure that the IP address of the computer is inconsistent with the default IP address of
the device. On the same network segment, use a browser to log in to the device, open a browser,
and enter the default IP address of the device in the address bar: 192.168.1.35 / 192.168.1.36.
When you log in to the device for the first time, click Enter, enter the device activate page. The
user name is admin, and the user password is set by the user. You also need to select your
password, country, language and time zone, as shown in Figure 4-1. Check "I agree to these
terms of use" and click "Activate" to jump to login page, as shown in Figure 4-2. Take the AP
device as an example.
Figure 4-1 Activate

DS-3WF01C-2N Quick Start Guide
12
Figure 4-2 login
Step 2 The first page shown after log in is the Wizard page, and this page helps to set the basic
network parameters. The default mode is Bridge mode, and the default LAN IP address of AP
device is 192.168.1.35, the default LAN IP address of CPE device is 192.168.1.36.
If there are several devices connected in the Point-to-Point or Point-to-Multi-Point topologies,
they must be configured to different IP address to avoid conflicts.
AP: In this scenario mode, the device will be set to access point mode; it can be connected to a
client device. When you close the TDMA function, your phone or laptop can connect to the device.
CPE: In this scenario mode, the device will be set to client mode; it can be connected to an access
point device.
The default SSID of the AP device and the CPE device must be the same to directly
interconnect and transmit audio, video or data. If there are other DS-3WF01C-2N devices
within 500 meters, the SSID should be changed to be different in order to avoid connection
confusion.
Click Save & Apply button, the device will reboot and apply your configuration.

DS-3WF01C-2N Quick Start Guide
13
Figure 4-3 Wizard
Users can also click the “Network” bar at the top of the page to enter the “Wireless” page, click the
“Edit”button and modify the network name, frequency, key and other parameters.

DS-3WF01C-2N Quick Start Guide
14
Figure 4-4 Wireless
For the CPE device configuration, please refer to the AP device configuration.

DS-3WF01C-2N Quick Start Guide
15