Avenview SW-HDSDI-8X2 User manual

www.avenview.com
1
8 Port HD/SD-SDI Video Switch
with 2 Port Splitter
User’s Guide
Models
SW-HDSDI-8X2
© 2008 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly
prohibited.

www.avenview.com
2
Table of Contents
Section 1: Getting Started...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 3
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4 Introduction ........................................................................................................................... 4
1.5 Features ................................................................................................................................. 5
1.6 Package Contents................................................................................................................... 5
1.7 Before Installation.................................................................................................................. 5
1.8 Panel Description................................................................................................................... 6
1.9 IR Remote Control.................................................................................................................. 7
Section 2: Installation............................................................................................................................. 8
Section 3: Specifications......................................................................................................................... 9

www.avenview.com
3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
The Avenview SW-HDSDI-8X2 HD/SD-SDI Matrix Switch has been tested for conformance to safety regulations
and requirements, and has been certified for international use. However, like all electronic equipments, the
SW-HDSDI-8X2 should be used with care. Please read and follow the safety instructions to protect yourself
from possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.

www.avenview.com
4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
The Avenview SW-HDSDI-8X2 receives and equalizes up to 8 SDI inputs, perfectly switches the desired input to
SDI equipped monitors or receivers. The switch supports both HD/SD-SDI bit rates. Through RS-232, IR remote,
or front panel push button, the control of the SDI switch becomes versatile and easier. By perfectly duplicating
the chosen SDI input, this SDI switch provides two identical outputs, and acts like a SDI splitter. SW-HDSDI-8X2
offers the most convenient and cost effective means for swift switch and duplication of high quality SDI in the
market..

www.avenview.com
5
1.5 Features
-HD/SD-SDI Switch
-Up to 8 equalized SDI inputs
-Dual Color LED indication of HD/SD of the output SDI
-Automatic detection of the SDI Input
-Synchronizes input/output (switch after vertical sync)
-Low-cost 8x2 HD/SD (dual-rate) switch with dual outputs
-Provides the equalized transmission path up to 300m (1000ft) at SD-SDI or 150m (500ft) at HD-SDI
-Multiple control by RS-232, IR remote, and push button
-Easy installation
1.6 Package Contents
Before you start the installation of the converter, please check the package contents.
-SW-HDSDI-8X2 x 1
-Power Adapter (+5VDC) x 1
-IR Remote Control x 1
-User’s Manual x 1
1.7 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com
6
1.8 Panel Description
FRONT PANEL
1. Input Channel LED
2. Input Channel Auto Detection LED
3. Output HD/SD Detection LED
4. IR Remote Receiver
5. Power Indicator LED
6. Push Button for Input Channel Switch
REAR PANEL
7. Power Switch
8. 5V DC Power Jack
9. Synchronized SDI Signal Input
10. RS232 Port
11. SDI Output
12. Synchronized Signal Loop-Out (add 75Ω
terminator if nothing connected)
13. SDI Input

www.avenview.com
7
1.9 IR Remote Control

www.avenview.com
8
Section 2: Installation
Follow these instructions for installation of SW-HDSDI-8X2:
1. Connect a SDI device to the output of SW-HDSDI-8X2
2. Connect the SDI input sources to the inputs of SW-HDSDI-8X2
3. Plug power adapter cable into 5V DC power jack
4. Use IR remote, front panel push button or through RS232 to switch between input channels

www.avenview.com
9
Section 3: Specifications
Item
Description
Model
SW-HDSDI-8X2
SDI Standards
SD-SDI & HD-SDI
Auto HD/SD-SDI Detection
Yes
Supported Protocols
SMPTE 259M, SMPTE 292M
Video Bandwidth
Single Link: 1.485Gpbs & 1.485/1.001Gbps
Data Rates
143 / 270 / 1483 / 1485 Mbps
Supported Video
HD: 720p 50/59.94/60, 1035i 50/59.94/60, 1080i 50/59.94/60, 1080p 24/30
SD: [email protected], PAL@50Hz
Output impedance
75
Reclocking function
No
Cable equalization
HD-SDI: up to 150m (500ft)
SD-SDI: up to 300m (1000ft)
Audio support
Yes
RP-918 pathological
patterns
Immune
Input Connectors
8x BNC (SDI)
Output Connectors
2x BNC (SDI)
BNC connector
75inter-locked socket
Eye pattern characteristics
Amplitude: Within 800mV ±3% (<10%)
Rise overshoot: Less than 2% (<10%)
Fall overshoot: Less than 2% (<10%)
Long time jitter: 0.195μ (<1.0μ)
Timing jitter: 0.195μ (<1.0μ)
Alignment jitter: 0.127μ (<0.2μ)
Dimensions
7.4” x 4.9” x 1.7” (L x W x H)
Weight
890g (2lbs)
Power Supply
5V 4A DC
Power Consumption
10 Watts (max)
Operating Temperature
0~40°C [32~104°F]
Storage Temperature
-20~60°C [-4~140°F]
Relative Humidity
20~90% RH [no condensation]

www.avenview.com
10
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.