AVer CP10 User manual

CP10
Collaboration Controller
User Manual

Federal Communications Commission Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Warning:
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe
A est conforme à la norme NMB-003 du Canada.
DISCLAIMER
No warranty or representation, either expressed or implied, is made with respect to the contents of this
documentation, its quality, performance, merchantability, or fitness for a particular purpose. Information
presented in this documentation has been carefully checked for reliability; however, no responsibility is
assumed for inaccuracies. The information contained in this documentation is subject to change
without notice.
In no event will AVer Information Inc. be liable for direct, indirect, special, incidental, or consequential
damages arising out of the use or inability to use this product or documentation, even if advised of the
possibility of such damages.
TRADEMARKS
“AVer” is a trademark owned by AVer Information Inc. Other trademarks used herein for description
purpose only belong to each of their companies.

COPYRIGHT
©2021 AVer Information Inc. All rights reserved.
All rights of this object belong to AVer Information Inc. Reproduced or transmitted in any form or by any
means without the prior written permission of AVer Information Inc. is prohibited. All information or
specifications are subject to change without prior notice.
NOTICE
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. THE INFORMATION
CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY.
WARNING
To reduce risk of fire or electric shock, do not expose this appliance to rain or moisture.
Warranty will be void if any unauthorized modifications are done to the product.
Do not drop the camera or subject it to physical shock.
Use correct power supply voltage to avoid damaging camera.
Do not place the camera where the cord can be stepped on as this may result in fraying or
damage to the lead or the plug.
Hold the bottom of the camera with both hands to move the camera. Do not grab the lens or
lens holder to move the camera.
MORE HELP
For FAQs, technical support, software and user manual download, please visit:
Global: https://www.aver.com/HelpCenter/conferencing-collaboration
USA:https://www.averusa.com/business/support/
Europe:https://www.avereurope.com/download-center/
Technical Support:
Global: https://aver.com/technical-support
USA: https://averusa.force.com/support/s/contactsupport
Europe:https://www.avereurope.com/technical-support/

Contact Information
Global
AVer Information Inc.
https://www.aver.com
8F, No.157, Da-An Rd.,
Tucheng Dist.,
New Taipei City 23673,
Taiwan
Tel: [phone]
USA
AVer Information Inc.
https://www.averusa.com
668 Mission Ct.,
Fremont, CA 94539, USA
Tel: [phone]
To l l -free: [phone]
Technical support:
[e-mail]
European Headquarters
AVer Information Europe B.V.
https://www.avereurope.com
Westblaak 140, 3012KM,
Rotterdam, Netherlands
Tel: [phone]
Technical support:
[e-mail]

Contents
Package Contents...................................................................................................1
Optional Accessories ..............................................................................................1
Overview .................................................................................................................1
Power Connection...................................................................................................2
LED Status ..............................................................................................................3
Connecting CP10 to Internet...................................................................................3
System Configuration..............................................................................................7
(A)....................................................................................................................7
(B)....................................................................................................................8
How to Pair a Computer with CP10 while Running Zoom Rooms Controller
Application...............................................................................................................9
CP10 Main Page................................................................................................... 11
Scan and Connect AVer USB Cameras................................................................17
AVer PTZ App........................................................................................................26
PTZ................................................................................................................26
Set up the Preset................................................................................... 27
Select the Preset Point.......................................................................... 29

Audio...................................................................................................... 30
Tracking Mode ....................................................................................... 31
Setting and System .......................................................................................34

1
Package Contents
CP10 Quick Guide Warranty Card
Optional Accessories
1-port PoE+ Injector Wall Mount Bracket
Overview
1 Touchscreen
2 Status LEDs
3 PoE+ Port*
4 USB 2.0 Type A Port**
5 Kensington Lock
*Please use CAT 5e FTP cable (not included).
*Power over Ethernet plus (PoE+), compatible with IEEE 802.3AT.
**For trouble shooting, diagnosis only.

2
Power Connection
There are two ways to power the CP10.
With a PoE+ injector: Plug the power cord of the PoE+ injector into the wall. Connect the PoE+
injector to the CP10 and to the network using LAN cables.
Wall outlet
LAN port
on the wall
LAN (not included)
LAN (not included)
DATAOUT
+POE port
DATAIN
port PoE+ injector with power cord
(optional)
With a PoE+ switch: Connect the CP10 to a PoE+ switch using a LAN cable. Please use the
PoE+ switch to ensure stable power supply.
LAN (not included)
PoE+ Switch

3
LED Status
Color Status
Solid
Red
Choose controller mode of Zoom Rooms: Mute
Choose calendar mode of Zoom Rooms:
The room has an on-going meeting.
Solid
Green
Choose controller mode of Zoom Rooms: Unmute
Choose calendar mode of Zoom Rooms: The room does not have on-going meeting.
Solid
Blue
AVer PTZApp is running and Live View is open.
Connecting CP10 to Internet
Follow below steps to make sure CP10 has the same LAN network as meeting room PC.
1. Unpack CP10 and power it to connect it to internet (see Power Connection on page 2).
2. CP10 will bring up Zoom Rooms app once powered on. You will need to go back to main page to
configure the IP address of the CP10. While in Zoom Rooms screen, please swipe two fingers on
the left 2/3 of the screen for 1~2 times within 3 seconds to leave Zoom Rooms and access the
main page. Through this mechanism, it will avoid end-users to easily leave Zoom Rooms screen
without IT people’s authorization.
3. The default IP setting of CP10 is DHCP. To change it to Static IP, please tap the setting icon to
enter the setting page.

4
Tap Network & internet > Ethernet > Ethernet Ip mode > static. Configure the Static IP and
click Connect.

5
To go back to the setting page, tap arrow icon on the top.
If your network is working, please follow below steps to sync time. Tap System > Date & time.
Enable “Use network-provided time” first and tap “Time zone” to select your time zone. You will
see the time change to your local time.

6
If your network is NOT working, please follow below steps to sync time. Tap System > Date &
time. Disable “Use network-provided time” first and tap “Time” to adjust the time. You will see the
time change to your local time.
4. Please swipe two fingers on the left 2/3 of the screen for 1~2 times within 3 seconds to leave the
internet setting page and access the main page. Through this mechanism, it can avoid end-users
to easily leave setting page without IT people’s authorization.

7
System Configuration
(A)
This configuration is for running Zoom Rooms controller app in CP10.
All the USB cameras in the market (following UVC/UAC protocol) can work with CP10 while running
Zoom Rooms controller app.
TV PC
Cloud
HDMI Cable
USB Cable
Router
USB Camera
Ethernet
CP10
Ethernet

8
(B)
This configuration is for running AVer PTZApp in CP10 and controlling AVer cameras. This case is for
meeting room PC running other VC software, such as Skype or Teams and using CP10 to control AVer
camera.
[Note] PTZApp in CP10 first supports CAM520 Pro/ CAM520 Pro2/ VC520 Pro/ VC520 Pro2/ VB130,
AVer cameras with Ethernet connection. All other AVer USBCAM with only USB connection to PC will
be supported June 2021.
TV PC
Cloud
HDMI Cable
USB Cable
Router
USB Camera
Ethernet
CP10
Ethernet
Ethernet

9
How to Pair a Computer with CP10 while
Running Zoom Rooms Controller
Application
1. Install Zoom Rooms Conference Room application on the computer.
2. Open Zoom Rooms app on the computer.
3. Open the Zoom Rooms app on CP10. (Zoom Rooms app is pre-installed in CP10. When you
power on CP10, it will launch Zoom Rooms app automatically.)
4. It will show two options: Room Controller and Scheduling Display.
5. To control USB camera during Zoom Rooms meeting, choose Room Controller. The computer will
display a pairing code. Enter this code on CP10.

10
6. On CP10, tap Sign In.
7. Sign in as an account owner, admin, or user with Zoom Rooms privileges to start the ZOOM
meeting and use CP10 to control USB camera device.

11
CP10 Main Page
The system will bring up Zoom Rooms app as default. While in Zoom Rooms screen, please swipe two
fingers on the left 2/3 of the screen 1~2 times within 3 seconds to leave Zoom Rooms and access the
main page. Through this mechanism, it can avoid end-users to easily leave Zoom Rooms screen
without IT people’s authorization.
Main page:
You will see pre-installed Zoom Rooms and AVer PTZ app*. Tap AVer PTZ app to open it. When you
want to close the AVer PTZ app and return to the main page, swipe two fingers on the left 2/3 of the
screen 1~2 times within 3 seconds.
[Notes]
1. The PTZ app in CP10 is different from PC version.
2. The star icon by the app indicates the auto bring up app. Tap the star icon to cancel auto bring up.
If user wants to select another app as the auto bring up app, just tap the star icon by the app.

12
3. Tap Add and select an app to add to the main page.

13
4. To delete the app, tap and hold the app until the x icon appears and select the x icon.
[Note] Zoom Rooms and AVer PTZ apps cannot be deleted.
5. Tap the setting icon to open setting page.

14
There are four items:
Settings: Set up CP10 system, including IP address, languages, panel sleep timer, device sound
and CP10 device information, etc.
Firmware Update: There are two ways to update CP10 firmware. This button is to update FW
online.